Kicker 46HDTPH Manual

Kicker Hi-Fi system 46HDTPH

Læs gratis den danske manual til Kicker 46HDTPH (6 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Kicker 46HDTPH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

1. Remove the fairing, tank, and seat according to the manufacturer’s service manual.

2. Plug the 4-pin connector into the front kit’s rear

inputs, then route the RH14HDT harness through the

neck and wiring track to the rear of the bike .

3. Route the harness along the clutch side to the rear pods; notice the tags for the

clutch side and the throttle side.

4. Find the rear speaker 4-pin plug and unplug the resistor pack.

46HDTPH

Tour-Pak Harness Kit Installation Guide for

Harley Davidson® Tour-Pak Motorcycles 2014–Present

Package Contents:

(1) Install Guide (1) Wiring Harness RH14HDT (1) Wiring Harness RH14HDTI

(6) Zip Ties (4) Black Heat Shrink

Important: Over-tightening mounting fasteners may result in damage to your motorcycle. Please refer to your service

manual for proper procedures and torque speciﬁ cations. KICKER is not responsible for damage resulting from improper

installation techniques. This kit be compatible with some aftermarket head units.may not

NOTE: It is necessary to re-ﬂ ash your HD radio for 4 speaker set up before installation of this kit. If you do not have the

Techno Research Centurion program software you may purchase a Kicker TRHDP Radio Flash Programmer.

KICKER cannot be held responsible for any damage to painted surfaces during removal or addition of KICKER parts. 46HDTPH-B-20200305

5. Plug in the Rear accessory harness and route the harness along

the clutch side of the bike, alongside the factory harness.

6. Remove the factory speakers.

7. Route both side speaker wires (input

and output) through the factory gromet into

the speaker pod.

8. Connect the speaker wires to the factory or replacement speaker and connect the

input wires to the factory speaker wires. Use shrink wrap over the connections to factory

speaker wires to avoid shorts.

9. Reinstall the speakers and zip tie the

new harness to the factory harness, making

sure the new wiring does not interfere with

the seat.

10. Reinstall the tank, seat, and fairing.

NOTE: It will be necessary to check that the crossover and gains are set properly for the rear speakers if

you’re using factory or Kicker PS65 speakers. The crossover should be set to 80HZ with optimized gain lev-

els. For questions, please contact KICKER Technical Support at 800-256-0808, M-F 8:00am – 5:00pm CST

or email at support@kicker.com. For installation videos please go to our KICKER YouTube channel.

Produkt Specifikationer

Mærke:	Kicker
Kategori:	Hi-Fi system
Model:	46HDTPH

Har du brug for hjælp?

Hvis du har brug for hjælp til Kicker 46HDTPH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hi-Fi system Kicker Manualer

Kicker 46HDTPH Manual

6 Oktober 2024

Kicker PS42 Manual

22 September 2024

Kicker 10PS5250 Manual

29 Juli 2024

Kicker ZK 350 Manual

28 Juli 2024

Kicker PS52504 Manual

28 Juli 2024

Kicker 46HDR154 Manual

22 Juli 2024

Kicker ZK 150 Manual

22 Juli 2024

Kicker TRHDP Manual

18 Juli 2024

Kicker 46HDS144 Manual

18 Juli 2024

Kicker 46HDS962 Manual

18 Maj 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Musical Fidelity M8x TT Manual

17 Juni 2025

DS18 DSP4.8BTM Manual

17 Juni 2025

Energy Sistem Car FM Talk Manual

16 Juni 2025

Musical Fidelity M6x TT Manual

14 Juni 2025

Musical Fidelity X-Tube Manual

14 Juni 2025

Musical Fidelity MX Stream Manual

13 Juni 2025

Korg handytraxx tube Manual

13 Juni 2025

Fantech SNIPER 7.1 HG16 Manual

8 Juni 2025

Fantech WHG04 Manual

8 Juni 2025

Fantech CAPTAIN 7.1 HG10 Manual

8 Juni 2025