Kicker SubStage SF150S09 Manual

Kicker Subwoofer SubStage SF150S09

Læs gratis den danske manual til Kicker SubStage SF150S09 (9 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Kicker SubStage SF150S09, eller vil du spørge andre brugere om produktet?

Side 1/9
1
SF150S09
Designed for 2009 and newer Ford® F-150 Super-Cab vehicles
Subwoofer Assembly
Subwoofer Power Harness
Subwoofer Body
Harness
25A Fuse
Wire Ties x6
Foam Strips
M6 Speed Clips x3
Adhesive Covers x3
M6 Bolts x3
M8 Bolts x3
M8 Nut Inserts p1-x3
(Requires Nut Insert Tool)
Wire Taps x2
Adapter Harness
©2012 Stillwater Designs
SF150S09-A2-20121213
2
Power Wire Routing
1. Open the hood, disconnect the negative battery cable.
2. Find the fuse box in the engine compartment and open the cover.
3. Remove the nut on the accessory lug, connect the power wire and retighten the nut. Torque to 9Nm.
Fig. 1
4. Route the power wire across the radiator support and toward the grommet on the driver’s side of the
rewall. Fig. 2
5. Make a small incision in the rubber grommet and pass the power wire into the cabin.
6. Install the black connector on the end of the power harness inside the cabin. The black connector should
have a block out plug installed in one side to prevent the power wire from being inserted into the wrong
position in the connector.
7. Connect the black two-pin connector of the power wire to the corresponding connector of the subwoofer
harness.
8. Remove the driver’s side threshold panel along the bottom of the front and rear door opening. Fig. 3
9. Pull back the rubber door molding and then pull back on the kick panel to remove it. Fig. 3
10. Connect the black ground wire of the subwoofer harness to the factory ground point in the drivers side
kick panel. Torque to 9Nm. Fig. 4
11. Route the subwoofer harness along the door opening and toward the rear of the cab.
Subwoofer Input Connection without Optional Amplifi er
12. Connect the adaptor harness to the white two pin connector of the subwoofer body harness.
13. Find the twisted pair of wires in the driver’s side kick panel that are solid white and white with a brown
stripe.
Connect
Power Wire
Here
Secure
Harness
Here Fig. 1
Grommet
Fig. 2
Fig. 3
Fig. 4
Connect
black
ground
wire of
subwoofer
harness


Produkt Specifikationer

Mærke: Kicker
Kategori: Subwoofer
Model: SubStage SF150S09

Har du brug for hjælp?

Hvis du har brug for hjælp til Kicker SubStage SF150S09 stil et spørgsmål nedenfor, og andre brugere vil svare dig