KidKraft Austin Toy Box 14951 Manual

KidKraft Skab Austin Toy Box 14951

Læs gratis den danske manual til KidKraft Austin Toy Box 14951 (3 sider) i kategorien Skab. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 23 anmeldelser. Har du et spørgsmål om KidKraft Austin Toy Box 14951, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

A. Cross Dowel Bolt

x 14 pcs

2 in / 50 mm

B. Screw x 2 pcs

7/8 in / 22 mm

C. Cross Dowel Nut

x 14 pcs

D. Nylon Washer

x 2 pcs

Please retain this information for future reference

To order replacement parts, please visit www.kidkraft.com

Austin Toy Box

Assembly Instructions

HARDWARE

Allen Wrench x 1 pc

The following tools

(not included) are

required for assembly:

Phillips

Screwdriver

PARTS LIST

STEP 1

STEP 2

STEP 3

Helpful Hint: Check all predrilled

holes for excess sawdust and clean

out the holes with a flathead screwdriver

if necessary.

Flathead Screwdriver

Item #14951 White, 14953B Natural, 14954C Honey,

14955B Cherry, 14956C Espresso, 14957 Pink, 14958C Vanilla,

14959 Blueberry, 14960 Bubblegum, 14961 Red, 14962 Gray

Customer Service

1-800-933-0771

www.kidkraft.com

IMPORTANT:

Lid support mechanism must be installed properly (Step 5)

or a head/neck entrapment may exist. Check to make sure

the Lid Support is properly installed by moving the lid back

and forth. When you let go of the lid it should stop, not fall

or slam shut.

USE AND MAINTENANCE:

-Use on level surfaces only

-Please check assembly at regular intervals, and

frequently tighten hardware if necessary. If

maintenance is not carried out, the product could

cease to function properly.

WARNING:

IMPORTANT! DO NOT

TIGHTEN SCREWS OR

BOLTS UNTIL COMPLETELY

ASSEMBLED.

ADULT ASSEMBLY REQUIRED.

-Product includes small parts with potentially hazardous sharp points and sharp edges

in the unassembled state. Keep unassembled parts away from children.

-Do not allow children to play inside with lid closed. In certain situations, sufficient air

may not be available for breathing.

Customer Service

1-800-933-0771

www.kidkraft.com

Austin Toy Box

Assembly Instructions

STEP 4 STEP 5

COMPLETE

Check periodically

to make sure the lid

is not falling shut.

If the lid is starting

to slowly fall shut,

adjust the braking tension

(set screw) with a 4mm hex

key until the lid will remain

open when you let go of it.

When you let go

of the lid it should

stop, not fall or

slam shut.

Before calling customer service, please

locate the batch code number

(example: 105906/65006/04) found on the

bottom or back of your product.

Incorrect

Correct

Item #14951 White, 14953B Natural, 14954C Honey,

14955B Cherry, 14956C Espresso, 14957 Pink, 14958C Vanilla,

14959 Blueberry, 14960 Bubblegum, 14961 Red, 14962 Gray

Produkt Specifikationer

Mærke:	KidKraft
Kategori:	Skab
Model:	Austin Toy Box 14951
Bredde:	760 mm
Dybde:	540 mm
Højde:	460 mm
Vægt:	17531 g
Produktfarve:	Hvid
Ramme, materiale:	Medium-tæthed fibreboard (MDF)
Produkttype:	Brystkabinet
Pakkevægt:	18700 g
Pakkedybde:	610 mm
Pakkebredde:	980 mm
Pakkehøjde:	160 mm
Materiale:	MDF
Oprindelsesland:	Kina
Anbefalet køn:	Dreng/Pige
Anbefalet alder (min.):	3 År
Anbefalet alder (maks):	12 År
Antal enheder:	1 stk
Montering påkrævet:	Ingen
Kommerciel enhedstype:	Forbrugerenhed enkelt
Emballagesprog (ISO 639-format):	DEU, ENG, ESP, FRE, DUT
Bestilbar enhed:	Ingen
(cdm) Målgrupper:	Early childhood, Child
Fakturaenhed:	Ingen
Vejledningssprog (ISO 639-format):	DEU, ENG, DAN, ESP, EST, FIN, FRE, GRE, HUN, ITA, DUT, POL, POR, ROM, SLV, SWE, CZE
Afsendelsesenhed:	Ingen
(cdm) Sæsonbestemt:	Permanent
(cdm) Yderligere brug:	Indendørs
(cdm) Forældres tilstedeværelse:	Anbefalet
(cdm) Tilgængelighedsperiode for reservedele:	3