Kinzo 29641 Manual

Kinzo Trykluft 29641

Læs gratis den danske manual til Kinzo 29641 (104 sider) i kategorien Trykluft. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Kinzo 29641, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/104
HANDTOOLS
High quality reliable tools.
X-POWER
A Long-nosed blow gun
B Langdüsige Blaspistole
C Lang persluchtpistool
D Souffl ette à long bec
E Pistola ad aria compressa a
becco lungo
F Pistola de aire de boquilla larga
G Pistola de ar de ponta longa
H Pitkäkärkinen puhalluspistooli
I Langneset trykkluftspistol
J Sprutpistol med lång pipa
K Langnæset trykluftspistol
L Hosszú csövű fúvópisztoly
M Издължена стрела тип blowgun
N Pistol de sufl at cu ţeavă lungă
O Vzduchová pistole s dlouhým
nástavcem
P Vzduchová pištoľ s dlhým hrotom
Q Pištolj s dugim nosom
R Pistolet natryskowy z długą
szprycą
S Putų pistoletas su ilgu antgaliu
T Воздушный пистолет с
длинным носиком
U Pika otsaga puhkpüss
V Pneimatiskā pistole ar garu
uzgali
W Uzun hava tabancası
X Πιστόλι φυσήματος με μακρύ
ρύγχος
z Pihalna pištola z dolgo cevjo
Long-nosed blow gun
Langdüsige Blaspistoler
29641 manual.indd 1 07-11-11 12:07
2
AInstruction manual
SAFETY INSTRUCTIONS
1. Read these instructions carefully before fi rst use. Failure to observe the following precauti-
ons can result in serious injury.
2. NEVER use this tool near explosive materials, liquids, or gases.
3. Disconnect equipment from the air supply before changing attachments or accessories.
4. Do not wear baggy or loose clothing when working.
5. Wear appropriate protective equipment such as safety goggles, gloves, hearing protection
and / or respiratory protection.
6. During operation, make sure you can maintain fi rm, secure footing.
7. Disconnect from the air supply prior to the installation of accessories, or before maintenance
on pneumatic devices.
8. NEVER aim a compressed air device at yourself or anyone else. This can result in serious
injury.
9. Tighten all fi ttings and always be sure that your equipment is in good working condition.
10. If the tool starts to operate unusually, release the trigger and disconnect the pneumatic
device from the air supply. Do not use the air unit again until it has been either tested or
repaired.
11. Only use accessories suitable for use with compressed air.
WARNING!
Improper use of this type of device can cause injury and property damage. Read these instruc-
tions and all safety precautions carefully before use. When working with air tools, always follow
standard safety guidelines to minimise the risk of injury.
WARRANTY
Please read these instructions carefully before fi rst use.
If you have any questions about this product, please contact your supplier.
This warranty does not cover damage due to improper use, improper maintenance, or normal wear and tear.
It is void if the tool has been repaired or modifi ed by an unauthorised person.
AIR PRESSURE
For satisfactory results when working with compressed air equipment, ensure it has a proper air supply. The
pressure of the air intake should be 6.3 bar (90psi).
AIR LINE
Use a 3/8” air hose between the compressor and the tool. Compressed air is cooled and its water content
condenses as soon as the air leaves the compressor.
29641 manual.indd 2 07-11-11 12:07

Produkt Specifikationer

Mærke: Kinzo
Kategori: Trykluft
Model: 29641

Har du brug for hjælp?

Hvis du har brug for hjælp til Kinzo 29641 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Trykluft Kinzo Manualer

Kinzo

Kinzo 29641 Manual

13 August 2024
Kinzo

Kinzo 29638 Manual

1 August 2024

Trykluft Manualer

Nyeste Trykluft Manualer

Parkside

Parkside PDFP 500 A1 Perslucht Manual

27 September 2024
Parkside

Parkside IAN 298896 Perslucht Manual

26 September 2024
Parkside

Parkside IAN 300488 PDFP 500 C3 Perslucht Manual

8 August 2024