Klark Teknik DN 30R Manual

Klark Teknik Ikke kategoriseret DN 30R

Læs gratis den danske manual til Klark Teknik DN 30R (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Klark Teknik DN 30R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

(1) Headphone output – Connect a pair of

headphones via ⁄" TRS cable. The volume can be

adjusted with the adjacent LEVEL knob.

(2) SYNC LED – The LED will light red when the unit

is powered on, and light green when the unit is

connected to an Ethernet network. A ashing green

LED indicates that the unit is in master clock mode,

and solid green indicates slave mode.

(3) SYS LED – The LED will light red while the unit

is booting up. Once Dante becomes active,

the LED will light green.

(4) SIGNAL LEDs – The left and right LEDs will light

green when signal is present on each channel.

The LEDs will light red when the input signal

approaches clipping.

(5) ETHERCON LEDs – The left LED lights green to

indicate data trac, and the right LED lights to

indicate successful Ethernet connection.

(6) ETHERCON port – Connects the unit to a Dante

network via CAT5e or CAT6 cable. Power can also

be supplied via this connection.

(7) ON LED – Lights when power is connected via the

included 24 V power adapter.

(8) PoE LED – Lights when the unit is receiving power

via the Ethernet port.

(9) DC INPUT – Connect the included power adapter if

you don’t plan to use PoE.

(10) EARTH LIFT – Removes the ground/earth

connection to remove unwanted noise.

(11) OUTPUT L/R – Connect to a mixing console or audio

interface via balanced XLR cables.

(12) INPUTS – Connect an audio source via balanced

or unbalanced ¼" cables, RCA cables, or a stereo

⁄" cable. All inputs are wired in parallel with one

another.

(13) LEVEL – Adjusts the level of all input jacks. Start

with the knob at the center 12:00 position and turn

up if more signal is needed. Turn the knob down if

the SIGNAL LEDs light solid red.

DN 30T/DN 30R

2-Channel Dante Audio Receiver/Transmitter for High-Performance Networking

(1) (2)(3) (5) (5) (6) (7)(2) (9)(3) (8)

(10) (13)(11) (12)(9) (4)

DN 30R DN 30T

(7)

(6)

(8)

Produkt Specifikationer

Mærke:	Klark Teknik
Kategori:	Ikke kategoriseret
Model:	DN 30R

Har du brug for hjælp?

Hvis du har brug for hjælp til Klark Teknik DN 30R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Klark Teknik Manualer

Klark Teknik NCAT5E-50M Manual

7 December 2024

Klark Teknik DI 10P Manual

23 August 2024

Klark Teknik DS 20 Manual

23 August 2024

Klark Teknik DS 50 Manual

23 August 2024

Klark Teknik DI 22P Manual

23 August 2024

Klark Teknik PRO DI 20P Manual

23 August 2024

Klark Teknik DN200 V2 Manual

23 August 2024

Klark Teknik DN 30T Manual

23 August 2024

Klark Teknik DN200 Manual

23 August 2024

Klark Teknik DN 30R Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Pentax IQZoom 130-M Manual

15 November 2025

IFM EBC024 Manual

15 November 2025

StarTech.com CK4-P204C Manual

15 November 2025

Zen Living 350133 Manual

15 November 2025

Televés Optical 237003 Manual

15 November 2025

Lucide Lionel Manual

15 November 2025

ADATA MA48V2K1-GSE-01 Manual

15 November 2025

Homedics HST-100-EU Manual

15 November 2025

Homedics Illumine ILS-ASN Manual

15 November 2025

Homedics SBM-301MH Manual

15 November 2025