Klark Teknik DN200 V2 Manual

Klark Teknik Ikke kategoriseret DN200 V2

Læs gratis den danske manual til Klark Teknik DN200 V2 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Klark Teknik DN200 V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Quick Start Guide

DN200

2-Channel Active DI Box with Extended Dynamic Range and Sum/Split Options

V 1.0

(1) STEREO INPUT – Connect a line-level audio source via stereo

⁄" TRS cable. Ensure that the L/R INPUTS and LINK THRU jacks

are disconnected when using the STEREO INPUT jack.

(2) PAD – Press to reduce the input signal by 20 dB for use

with hot signals.

(3) EARTH – Press to separate the input and output grounds,

potentially eliminating earth/ground loops between

equipment on dierent mains supplies.

(4) L/R INPUT – Connect either balanced or unbalanced XLR

or ¼" cables. Ensure that the ⁄" STEREO INPUT jack is

disconnected when using these inputs.

(5) 48 V LED – Lights when the unit receives sucient

phantom power. Note that the DN200 must be powered to

operate correctly.

Although the DN200 will function as a mono Important:

device when only one channel is connected, both channels

should be powered to use stereo, split, or sum modes.

(6) SUM – When engaged, the left and right inputs are

summed and fed to the left and right outputs. Note that

phantom power must be delivered to both output

connections for dual-output operation.

(7) SPLIT – When engaged, the left input is fed to the

left and right outputs. Note that phantom power

must be delivered to both output connections for

dual-output operation.

(8) L/R OUTPUT – Send the signals to a mixer or recording

interface via balanced XLR cables. Note that the connected

device must be able to provide +48 V phantom power to

these connectors.

(9) LINK THRU – Send the signals to an alternate source

via balanced or unbalanced ¼" cables. Ensure that

the ⁄" STEREO INPUT jack is disconnected when using

these outputs.

(2) (3)

(7)(6)

(8) (9)

(1)

(5)

(4)

Produkt Specifikationer

Mærke:	Klark Teknik
Kategori:	Ikke kategoriseret
Model:	DN200 V2

Har du brug for hjælp?

Hvis du har brug for hjælp til Klark Teknik DN200 V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Klark Teknik Manualer

Klark Teknik NCAT5E-50M Manual

7 December 2024

Klark Teknik DI 10P Manual

23 August 2024

Klark Teknik DS 20 Manual

23 August 2024

Klark Teknik DS 50 Manual

23 August 2024

Klark Teknik DI 22P Manual

23 August 2024

Klark Teknik PRO DI 20P Manual

23 August 2024

Klark Teknik DN200 V2 Manual

23 August 2024

Klark Teknik DN 30T Manual

23 August 2024

Klark Teknik DN200 Manual

23 August 2024

Klark Teknik DN 30R Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gamdias Aura GC4 Elite Argb Manual

28 December 2025

Vaxcel T0343 Manual

28 December 2025

D-Link DIS-100E-05 Manual

28 December 2025

Yamazen DSG3-100 Manual

28 December 2025

DeWalt DCG404 Manual

28 December 2025

Blaupunkt MS40.2BT Manual

28 December 2025

Reelcraft L 4545 123 3AC Manual

28 December 2025

Sabrent EC-UASP Manual

28 December 2025

AEG MS2600B Manual

28 December 2025

Daikin FWQ05AA Manual

28 December 2025