Klein Tools ET270 Manual
Klein Tools
Måleudstyr
ET270
Læs gratis den danske manual til Klein Tools ET270 (36 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Klein Tools ET270, eller vil du spørge andre brugere om produktet?
Side 1/36
INSTRUCTION MANUAL
ENGLISH
• AUTO-RANGING
WITH DATA HOLD
• AUDIBLE
CONTINUITY
• BATTERY TEST
• PERFORMS
STANDARD AND
GFCI WIRING
FAULT TESTS
• INDICATES
A CIRCUIT'S
BREAKER IN
FIND MODE
FRANÇAIS p. 25
ESPAÑOL pg. 13
Multi-Tester DMM with
Receptacle Tester
ET270
2m
CAT III
600V
600V
40M
Ω
5001748
2
GENERAL SPECIFICATIONS
Klein Tools' ET270 is an auto-ranging digital multi-tester that measures
AC/DC voltage, resistance, continuity, and performs a battery test. It also
tests wiring conditions in standard 120V and GFCI electrical receptacles
and inspects North American GFCI devices.
• Environment:
Indoor. DO NOT expose to moisture, rain, or snow.
• Operating Altitude: 6562 ft. (2000m)
• Relative Humidity: <80% non-condensing
• Operating Temp: ° ° ° °32 F to 104 F (0 C to 40 C)
• Storage Temp: ° ° ° °14 F to 140 F (-10 C to 60 C)
• Accuracy: Values stated at 65°F to 83°F (18°C to 28°C)
• Temp Coef cient: °0.1 x (Quoted Accuracy) per C above
28 C or below 18 C, corrections are required when ambient ° °
working temp is outside of Accuracy Temp range
• Dimensions: 6.41" × 3.13" × 1.84" (162.7 × 79.4 × 46.6 mm)
• Weight: 8.9 oz. (250 g)
• Calibration: Accurate for one year
• Standards: Conforms to: UL STD 61010-1, 61010-2-033, 1436.
Certified to: CSA STD C22.2 # 61010-1,
61010-2-033, 160.
IEC EN 61010-1, 61010-2-033, 61326-1.
• Pollution degree: 2
• Accuracy: ± (% of reading + # of least significant digits)
• Drop Protection: 6.6 ft. (2 m)
• Safety Rating: CAT III 600V, Class 2, Double insulation
CAT III: Measurement category III is applicable to test and
measuring circuits connected to the distribution part of the
building’s low-voltage MAINS installation.
• Electromagnetic Environment: IEC EN 61326-1. This
equipment meets requirements for use in basic and controlled
electromagnetic environments like residential properties,
business premises, and light-industrial locations.
Specifications subject to change.
ENGLISH
Produkt Specifikationer
| Mærke: | Klein Tools |
| Kategori: | Måleudstyr |
| Model: | ET270 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Klein Tools ET270 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Måleudstyr Klein Tools Manualer
1 Januar 2025
28 December 2024
21 September 2024
21 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
3 September 2024
Måleudstyr Manualer
- IFM
- Zircon
- SensoProtect
- Apollo Ultrasonic
- Rotronic
- Megasat
- Microlife
- AkYtec
- Lanaform
- Kyoritsu
- Oregon Scientific
- Shimano
- Holzmann
- Weltron
- Owon
Nyeste Måleudstyr Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025
3 April 2025