Kodak Scan Station 520EX Manual

Kodak Scanner Scan Station 520EX

Læs gratis den danske manual til Kodak Scan Station 520EX (142 sider) i kategorien Scanner. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Kodak Scan Station 520EX, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/142
Safety
• Place the Kodak Scan Station 500 on a level work surface capable of supporting 13.6 kgs (30 lbs).
• When placing the Scan Station, make sure that the electrical power outlet is located within 1.52 metres (5 feet) of the Scan
Station and is easily accessible.
• When relocating the Scan Station, it is recommended that two people lift the Scan Station and use safe lifting techniques.
• Do not install the Scan Station in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only
use the Scan Station indoors in a dry location.
• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the Scan Station and is easily accessible.
• When disconnecting equipment from the electric socket, be sure to grasp the plug, not the cord.
• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.
• Do not damage, knot, cut or modify the power cord or use a damaged power cord. This may cause electrical shock or fire.
• The Scan Station requires a dedicated and properly grounded power outlet. Do not use an extension cord or power strip with
the Scan Station.
• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
• Do not use the Scan Station if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
Immediately stop the Scan Station and disconnect the power cord from the power outlet. Contact Kodak Service.
• Do not disassemble, service or modify the Scan Station except as explained in the User’s Guide.
• Do not move the Scan Station with the power cord and interface cable attached. This may cause damage to the cord/cable.
Remove the power cord from the wall outlet before moving or relocating the Scan Station.
• Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace
dust, dirt and debris to other locations within the scanner, which may cause the Scan Station to malfunction.
• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.
When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you
want the Material Safety Data Sheet for.
Environmental information
• The Kodak Scan Station 500 is designed to meet worldwide environmental requirements.
• Guidelines are available for the disposal of consumable items that are replaced during maintenance or service; follow local
regulations or contact Kodak locally for more information.
• Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information,
contact your local authorities or, in the USA, visit the Electronics Industry Alliance website: www.eiae.org.
• The product packaging is recyclable.
• Parts are designed for reuse or recycling.
European Union
This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities
for recovery and recycling. Please contact your local Kodak representative or refer to www.kodak.com/go/recycle
for additional information on the collection and recovery programs available for this product.
Please consult www.kodak.com/go/REACH for information about the presence of substances included on the candidate list
according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).
Battery Information
This product contains a Lithium Ion button cell battery. This battery can only be removed or replaced by a qualified Service
Engineer.
Acoustic emission
Maschinenlärminformationsverordnung – 3, GSGV
Der arbeitsplatzbezogene Emissionswert beträgt <70 db(A).
[Machine Noise Information Ordinance — 3, GSGV
The operator-position noise emission value is <70 dB(A).]
phase est de 230 V.

Produkt Specifikationer

Mærke: Kodak
Kategori: Scanner
Model: Scan Station 520EX

Har du brug for hjælp?

Hvis du har brug for hjælp til Kodak Scan Station 520EX stil et spørgsmål nedenfor, og andre brugere vil svare dig


Scanner Kodak Manualer

Kodak

Kodak SLIDE N SCAN Digital Film Scanner 7" Max Manual

1 August 2025
Kodak

Kodak SLIDE N SCAN Digital Film Scanner Manual

1 August 2025
Kodak

Kodak Reels Manual

1 August 2025
Kodak

Kodak Alaris S3060 Manual

1 August 2025
Kodak

Kodak Alaris S2040 Manual

22 Februar 2025
Kodak

Kodak Sidekick 1400U Manual

6 Oktober 2024
Kodak

Kodak I1190E Manual

12 September 2024
Kodak

Kodak Alaris E1040 Manual

31 August 2024
Kodak

Kodak Mobile Film Scanner Manual

30 August 2024
Kodak

Kodak Scan Station 520EX Manual

10 August 2024

Scanner Manualer

Nyeste Scanner Manualer

Fujitsu

Fujitsu fi-8250 Manual

1 August 2025
Fujitsu

Fujitsu fi-8290 Manual

1 August 2025
Fujitsu

Fujitsu ScanSnap SP-1125 Manual

1 August 2025
Newland

Newland FM3281 Grouper Manual

1 August 2025
Brother

Brother ADS-1800W Manual

1 August 2025
I.R.I.S.

I.R.I.S. IRIScan Desk 7 Business Manual

30 Juli 2025
Avision

Avision AD360GFWN Manual

29 Juli 2025
AVerMedia

AVerMedia AVerVision M5 Manual

27 Juli 2025
Xerox

Xerox FD70 Manual

26 Juli 2025
I.R.I.S.

I.R.I.S. IRISCan Mouse Executive 2 Manual

20 Juli 2025