König HC-SH20N Manual

König Brusehoved HC-SH20N

Læs gratis den danske manual til König HC-SH20N (51 sider) i kategorien Brusehoved. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16 anmeldelser. Har du et spørgsmål om König HC-SH20N, eller vil du spørge andre brugere om produktet?

Side 1/51
HC-SH20N
MANUAL (p. 2)
ANLEITUNG (S. 4)
MODE D’EMPLOI (p. 6)
GEBRUIKSAANWIJZING (p. 8)
MANUALE (p. 10)
MANUAL DE USO (p. 12)
MANUAL (p. 14)
HASZNÁLATI ÚTMUTATÓ (o. 16)
KÄYTTÖOHJE (s. 18)
BRUKSANVISNING (s. 20)
NÁVOD K POUŽITÍ (s. 22)
MANUAL DE UTILIZARE (p. 24)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 26)
BRUGERVEJLEDNING (s. 28)
VEILEDNING (s. 30)
ИНСТРУКЦИЯ (32 стр.)
KILAVUZ (s. 34)
KASUTUSJUHEND (lk. 36)
NÁVOD (s. 38)
ROKASGRĀMATA (lpp. 40)
NAUDOJIMO VADOVAS (42 p.)
PRIRUČNIK (str. 44)
РЪКОВОДСТВО (p. 46)
INSTRUKCJA OBSŁUGI (str. 48)
PRIROČNIK (str. 50)
Multicolour LED Shower Head
ENGLISH
2
Please handle the product with care, to prevent damage to the shower head.
You are strongly recommended to read and follow the manual carefully before
use. Please do not use the product in a corrosive environment; otherwise the
product will not work properly for a long time.
Features of LED shower head
Material: ABS, Electroplating
Ambient temperature: 0–60 °C
Ambient humidity: 10–90%
Minimum water pressure: 0.2MPa
Multicolour with temperature control
Green colour: temperature lower than 32 °C
Blue colour: temperature between 33 and 41 °C
Red colour: temperature between 42 and 45 °C
Above 46 °C RED colour will ash
LED Quantity
8 high brightness LEDs with a diameter of 5mm.
Instructions for use
After the LED shower is well installed, open the tap, the power generation
device inside LED shower will be driven to make LED light when water pressure
reaches 0.2MPa.
Installation
Step 1: Put LED Shower Head onto hose that connects with water pipe;
Step 2: Open the tap completely, then LED shower will work properly.
Note: If LED shower is not working properly, please check if water pressure
reaches 0.2MPa.
If LED shower still fails to work, please contact your supplier.


Produkt Specifikationer

Mærke: König
Kategori: Brusehoved
Model: HC-SH20N

Har du brug for hjælp?

Hvis du har brug for hjælp til König HC-SH20N stil et spørgsmål nedenfor, og andre brugere vil svare dig