König KN-CL30 Manual

König Ur KN-CL30

Læs gratis den danske manual til König KN-CL30 (24 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om König KN-CL30, eller vil du spørge andre brugere om produktet?

Side 1/24
15-11-2011
KN-CL30
MANUAL (p. 2)
Wall Clock
ANLEITUNG (S. 3)
Wanduhr
MODE D’EMPLOI (p. 5)
Horloge murale
GEBRUIKSAANWIJZING (p. 6)
Wandklok
MANUALE (p. 8)
Orologio da Parete
MANUAL DE USO (p. 9)
Reloj de pared
HASZNÁLATI ÚTMUTATÓ (o. 11.)
Falióra
KÄYTTÖOHJE (s. 13)
Seinäkello
BRUKSANVISNING (s. 14)
Väggklocka
NÁVOD K POUŽITÍ (s. 16)
Nástěnné hodiny
MANUAL DE UTILIZARE (p. 17)
Ceas de perete
ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 19)
Ρολόι τοίχου
BRUGERVEJLEDNING (s. 20)
Vægur
VEILEDNING (s. 22)
Veggklokke
2
ENGLISH
Wall Clock
First insert 2 “AA” batteries into the battery compartment after opening the battery door of the wall clock
and insert 1 “AA” battery into the compartment, then insert 2 “AAA” batteries into the sensor (transmitter)
after opening the battery door with a screw driver.
Functions and features:
- Indoor temperature display
- RF outdoor temperature display
- Weather forecast display
- RF receiving channels: CH1, CH2, CH3
- Temperature format: (°C/°F)
- Outdoor temperature range: - 20°C~50°C, Accuracy: +/-1°C
Time setting
- After putting 1 AA battery into the compartment, adjust the back wheel to set the time.
RF outdoor temperature instruction
Normal mode keys functions:
- Press the “°C/°F/DOWN” key to switch between °C/°F. The default temperature format is: °C.
- Press the “C/H/UP” key to switch between CH1, CH2 and CH3.
RF receiving
- After inserting the batteries in the clock and outdoor sensor, it will automatically enter RF mode
receiving for 3 minutes. The icon of the antenna will start to flash with 1 Hz frequency.
- In normal mode, hold the “UP” key for 2 seconds to clear the display data of the current RF channels
and renew the data again.
- If no signals are received within 60 minutes, the CH temperature will show “--.-”, and it will enter an
RF long receiving mode for 3 minutes.
- If it receives effective signals within 3 minutes, it will exit the RF long receiving mode and enter the
normal mode.
- If a signal is still not received within 3 minutes, it will exit RF receiving mode and enter the RF long
receiving mode within an hour. This will repeat every hour till it receives a signal.
- During RF receiving, the antenna icon starts to flash with 2 Hz frequency, and it will keep the icon on
screen if it receives the temperature signal. If no temperature is received, the icon will disappear.
Weather forecast functions:
- Weather forecast functions can forecast the weather conditions of the next 24 hours.
- Weather grade: Sunny/Slightly Cloudy/Cloudy/Rainy.
- Time of sensing: 30 minutes.
Wireless remote sensor (transmitter) instruction
- Transmitter frequency: 433.92 MHz.
- Batteries: 2x 1.5 V AAA.
- Use a screwdriver to remove the back of the battery compartment cover, insert the batteries into the
transmitter according to the correct polarity.
- Press the “°C/°F” button to select the temperature, either in °C or °F.
- You can put the transmitter in a garage, on an outdoor wall or window, indoor living room or garden.
- The maximum distance for the transmitter and receiver is up to 30 m (100 feet) in an open area.


Produkt Specifikationer

Mærke: König
Kategori: Ur
Model: KN-CL30

Har du brug for hjælp?

Hvis du har brug for hjælp til König KN-CL30 stil et spørgsmål nedenfor, og andre brugere vil svare dig