König KN-RFRIKIT Manual

König Fjernbetjening KN-RFRIKIT

Læs gratis den danske manual til König KN-RFRIKIT (20 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om König KN-RFRIKIT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
KN-RFRIKIT
ENGLISH
The radio control units included in the packaging are already programmed in bistable
mode and ready to use. To reprogram the remote controls, please follow below steps.
Programming the König receiver or additional remotes:
(To be performed on the receiver, picture 1)
The receiver can be programmed into: monstable or bistable mode
This König remote can be programmed to control output 1 and output 2 of the receiver in
bistable or monostable mode.
Example1: With the monostable mode, you can sent out a pulse to the central unit of an
automatic gate and open it.
Example 2: With the bistable mode, you can switch on a device (like a lamp) by pressing
the button one time, to switch o the device you have to press the same button once
again.
Example 3: If you use the monostable mode with a lamp, you push the button to switch on
the lamp, but when you release this button the lamp switches o.
So, you only should use the monostable mode if you need a pulse, otherwise you have to
use the bistable mode.
STEP 1:
Press the P1 button on the receiver:
1 time to program output 1 in monostable mode.
2 times to program output 2 in monostable mode.
3 times to program output 1 in bistable mode.
4 times to program output 2 in bistable mode.
STEP 2 (perform immediately after step 1 is carried out):
Keep pressing button A or B on the König remote (picture 2) that you want to sync until
the LED on the receiver begins to ash.
Erasing codes
There are two types of erasing.
A: Erasing of an individual code:
Press key P2 for approx. 2 seconds (release the key); the LED will light up, press the key on
the König remote control you would like to delete.
B: Erasing all acquired codes:
Press key P2 until the LED lights up (approx. 8 seconds).
RECEIVER

Produkt Specifikationer

Mærke: König
Kategori: Fjernbetjening
Model: KN-RFRIKIT

Har du brug for hjælp?

Hvis du har brug for hjælp til König KN-RFRIKIT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening König Manualer

König

König SAS-ASRC300 Manual

11 September 2024
König

König KN-RFRIKIT Manual

5 August 2024
König

König KN-RCU20B Manual

18 Juli 2024
König

König KN-WLHDMI20 Manual

24 April 2024
König

König KN-RCU80B Manual

22 April 2024
König

König KN-RFR2 Manual

2 April 2024
König

König SAS-ASRC240 Manual

31 December 2023
König

König KN-SMARTPRO10 Manual

25 December 2023
König

König IR-EASYTV01B Manual

13 Oktober 2023
König

König KN-RCU40B Manual

5 Juli 2023

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

AMX

AMX SP-16-AX-TR-UK Manual

14 September 2025
AMX

AMX AVS-MD4-CP10 Manual

14 September 2025
Philips

Philips SRC3036 Manual

14 September 2025
AMX

AMX MET-13 Manual

14 September 2025
AMX

AMX MET-7 Manual

14 September 2025
AMX

AMX VPT-CP Manual

14 September 2025
Somfy

Somfy Situo 5 io Manual

12 September 2025
Philips

Philips SRU3007/27 Manual

12 September 2025
LG

LG AN-MR500 Manual

12 September 2025
Panasonic

Panasonic CZ-RTC6 Manual

12 September 2025