König KN-RFROKIT Manual

König Fjernbetjening KN-RFROKIT

Læs gratis den danske manual til König KN-RFROKIT (20 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om König KN-RFROKIT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

KN-RFROKIT

ENGLISH

The radio control units included in the packaging are already

programmed in bistable mode and ready to use. To reprogram the

remote controls, please follow below steps.

Programming the König receiver or additional remotes:

(To be performed on the receiver, picture 1)

The receiver can be programmed into: monstable or bistable

mode

This König remote can be programmed to control output 1 and output 2

of the receiver in bistable or monostable mode.

Example1: With the monostable mode, you can sent out a pulse to the

central unit of an automatic gate and open it.

Example 2: With the bistable mode, you can switch on a device (like a

lamp) by pressing the button one time, to switch o the device you have

to press the same button once again.

Example 3: If you use the monostable mode with a lamp, you push the

button to switch on the lamp, but when you release this button the

lamp switches o.

So, you only should use the monostable mode if you need a pulse,

otherwise you have to use the bistable mode.

STEP 1:

Press the P1 button on the receiver:

1 time to program output 1 in monostable mode.

2 times to program output 2 in monostable mode.

3 times to program output 1 in bistable mode.

4 times to program output 2 in bistable mode.

STEP 2 (perform immediately after step 1 is carried out):

Keep pressing button A or B on the König remote (picture 2) that you

want to sync until the LED on the receiver begins to ash.

Erasing codes

There are two types of erasing.

A: Erasing of an individual code:

Press key P2 for approx. 2 seconds (release the key); the LED will light

up, press the key on the König remote control you would like to delete.

B: Erasing all acquired codes:

Press key P2 until the LED lights up (approx. 8 seconds).

Receiver

Ant Aux

Not included

Produkt Specifikationer

Mærke:	König
Kategori:	Fjernbetjening
Model:	KN-RFROKIT

Har du brug for hjælp?

Hvis du har brug for hjælp til König KN-RFROKIT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening König Manualer

König SAS-ASRC300 Manual

11 September 2024

König KN-RFRIKIT Manual

5 August 2024

König KN-RCU20B Manual

18 Juli 2024

König KN-WLHDMI20 Manual

24 April 2024

König KN-RCU80B Manual

22 April 2024

König KN-RFR2 Manual

2 April 2024

König SAS-ASRC240 Manual

31 December 2023

König KN-SMARTPRO10 Manual

25 December 2023

König IR-EASYTV01B Manual

13 Oktober 2023

König KN-RCU40B Manual

5 Juli 2023

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Philips Prestigo SRU8010 Manual

15 August 2025

Philips CP0118 Manual

14 August 2025

Renkforce RF-PLP-202 Manual

14 August 2025

Renkforce RF-5253052 Manual

14 August 2025

Renkforce RF-WRC-300 Manual

14 August 2025

Renkforce RF-PLP-200 Manual

14 August 2025

One For All EazyClean URC 9290 Manual

13 August 2025

One For All URC 2781 Manual

13 August 2025

One For All Digital 5 URC 7557 Manual

12 August 2025

Chamberlain CH382C Manual

12 August 2025