Korg NTS-2 oscilloscope kit Manual

Korg DJ udstyr NTS-2 oscilloscope kit

Læs gratis den danske manual til Korg NTS-2 oscilloscope kit (4 sider) i kategorien DJ udstyr. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Korg NTS-2 oscilloscope kit, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
1
Table of Contents
Introduction .............................................................................2
Main features of this unit .........................................................2
Part names and functions ........................................................2
Making connections and turning on the power ......................2
Turning the power on/o...................................................2
Auto power-o function ....................................................2
Four operating modes .............................................................2
Oscilloscope mode (SCOPE) ..............................................................................................2
Function generator mode (WAVE) ..................................................................................2
Spectrum analyzer mode (FFT) ........................................................................................2
Tuner mode (TUNER) ..........................................................................................................2
Basic operations .......................................................................3
Oscilloscope mode (SCOPE) .....................................................3
Explanations of each parameter ........................................3
Function generator mode (WAVE) ...........................................3
Button 1 (button 3): explanations of each parameter ........3
Button 2 (button 4): explanations of each parameter .......3
CATEGORY = Oscillator .......................................................................................................3
CATEGORY = LFO .................................................................................................................3
CATEGORY = Noise ..............................................................................................................3
CATEGORY = Pulse ..............................................................................................................3
CATEGORY = Envelope .......................................................................................................3
Spectrum analyzer mode (FFT) ................................................3
Explanations of each parameter ........................................3
Tuner mode (TUNER) ................................................................4
Explanations of each parameter ........................................4
Global mode .............................................................................4
1: Input ....................................................................................................................................4
2 : SETTINGS ..........................................................................................................................4
3 : SETTINGS ..........................................................................................................................4
Specications ...........................................................................4
Published 06/2022© 2022 KORG INC. www.korg.com
E 1
NTS-2 oscilloscope kit
MULTIFUNCTIONAL UTILITY KIT
Owner’s Manual
* All product names and company names are the trademarks or registered trademarks
of their respective owners.
2
En Introduction
ank you for purchasing the Multifunctional Utility Kit for the Nu:Tekt NTS-2 Os-
cilloscope Kit. To help you get the most out of your purchase, please read this manual
carefully.
Main features of this unit
is product is an assembly kit that you can use to build a digital oscilloscope. Aside
from letting you view audio output waveforms and CV signals, this oscilloscope func-
tions as a spectrum analyzer, oers a built-in tuner for tuning analog synthesizers, and
lets you output LFO, CV and other signals with its function generator.
Part names and functions
1
5 6 7 8 9
3 4
10
(Bottom)
2
1. Mode button
Use this button to switch between operating modes. Each time you press the button,
the mode changes.
a. Oscilloscope (SCOPE)
b. Function generator (WAVE)
c. Spectrum analyzer (FFT)
d. Tuner (TUNER)
e. Global (GLOBAL)
2. Buttons 1–4
e functions assigned to these buttons dier, depending on the operating mode.
3. START/STOP button
Starts and stops measurement. In function generator mode, this is also used to
output waveforms to an external device.
4. Value knob
Press to select a sub-menu, and turn to edit the selected parameter.
5. INPUT 1, 2 jacks
Connect a stereo (or mono) mini cable here to input the signal you wish to measure.
is lets you monitor the audio output from your musical instrument or input a CV
signal.
6. THRU 1, 2 jacks
Used as a thru out for the signal input from the INPUT 1 and 2 jacks.
7. OUTPUT 1, 2 jacks
Outputs the function generator signal.
Connect these jacks to your device with monaural mini plugs.
8. USB (Type-C) port
Use the included USB cable to connect this unit to the USB port on your computer
or to a commercially available USB standards-compliant AC adapter (at least 5 V
DC 550 mA).
9. Power button
Turns the power on and o. Hold this button down for approximately one second to
turn the power o.
10. Battery compartment
Making connections and turning on the power
USB (type portC)
USB cable
SIGNAL IN
SIGNAL OUT
NTS-2 oscilloscope kit
USB adapter AC
(USB 2.0 compatible)
(commercially available)
Computer
Use the included USB cable to connect this unit to the USB port on your computer
or to a commercially available USB standards-compliant AC adapter (at least 5 V DC
550mA).
Make sure to use the included USB cable.
Use a cable that’s no more than 3 m long when connecting your peripherals to this
unit.
Make sure to use an AC adapter that’s compliant with USB 2.0 standards. Note that
some standards-compliant USB AC adapters might not operate correctly.
Turning the power on/o
Long-press the power button to turn on the unit.
Long-press the power button again to turn the unit o.
Auto power-ofunction
e Nu:Tekt NTS-2 features an auto power-o function that automatically turns the
unit o aer one hour has elapsed without the knob, switches, buttons or other controls
being operated. e auto power-o function is enabled by factory default.
Auto power-o can be disabled using the steps below.
1. Use the mode button to enter global mode.
2. Press button 4 (SETTINGS: Power) a number of times to select “Auto Power
O(USB)” or “Auto Power O(Battery)”.
3. Turn the value knob to change the value to “innite”.
Four operating modes
Oscilloscope mode (SCOPE)
You can view the waveforms from up to four input sources. e functions below are
assigned to buttons 1–4.
1: DISPLAY: Switches between input signals.
2: VERTICAL: Sets the display range for the vertical screen direction (voltage).
3: HORIZONTAL: Sets the display range for the horizontal screen direction (time).
4: TRIGGER: Sets which change in input signal causes the display to update.
Function generator mode (WAVE)
In this mode, signal is output from the OUTPUT 1 and 2 jacks. ese outputs can be
used even while an input signal is being received. You can use the START/STOP button
to turn the waveform output on/o, continuously output the waveform by holding
down the button, or output only one cycle of the waveform (one-shot) by just pressing
the button. e functions below are assigned to buttons 1–4.
1: CATEGORY: Selects the waveform for OUTPUT 2, sets the level and so forth.
2: EDIT: Congures the detailed settings for the OUTPUT 2 waveform.
3: CATEGORY: Selects the waveform for OUTPUT 1, sets the level and so forth.
4: EDIT: Congures the detailed settings for the OUTPUT 1 waveform.
Spectrum analyzer mode (FFT)
is mode lets you observe the frequency characteristics of the input signal, by using a
spectrum analyzer that employs an FFT (fast Fourier transform) algorithm. e func-
tions below are assigned to buttons 1–4.
1: INPUT: Switches between input signals.
2: VERTICAL: Sets the display range for the vertical screen direction (voltage).
3: HORIZONTAL: Sets the display range for the horizontal screen direction (time).
4: TRIGGER: Sets which change in input signal causes the display to update. Nor-
mally, this is set to AUTO.
Tuner mode (TUNER)
is mode measures the pitch of the input signal from the oscillator of an analog syn-
thesizer or other source. You can select between a horizontal meter and a needle-type
(VU) meter view. e functions below are assigned to buttons 1–4.
1: DISPLAY: Selects the tuner display mode.
2: INPUT: Switches between input signals to measure.
3: CALIB: Adjusts the pitch lower or higher than the reference pitch of A=440Hz.
You can adjust the pitch within a range of 410–480 Hz.
4: SCOPE: Switches the oscilloscope display on/o.

Produkt Specifikationer

Mærke: Korg
Kategori: DJ udstyr
Model: NTS-2 oscilloscope kit

Har du brug for hjælp?

Hvis du har brug for hjælp til Korg NTS-2 oscilloscope kit stil et spørgsmål nedenfor, og andre brugere vil svare dig


DJ udstyr Korg Manualer

Korg

Korg Nu:Tekt NTS-3 Manual

1 Februar 2025
Korg

Korg Handytraxx Play Manual

26 Januar 2025
Korg

Korg SyncMetronome Manual

28 Maj 2024
Korg

Korg TM-40 Manual

23 April 2024
Korg

Korg AW-2U Manual

18 April 2024
Korg

Korg CM-300 Manual

8 April 2024
Korg

Korg TM-60C Manual

5 April 2024
Korg

Korg Kaoss DJ Manual

1 April 2024
Korg

Korg Volca Sample 2 Manual

4 Februar 2024
Korg

Korg PX1T Manual

11 Januar 2024

DJ udstyr Manualer

Nyeste DJ udstyr Manualer

Omnitronic

Omnitronic DJTV-1 Manual

16 Juni 2025
DNA

DNA MIX 4 Manual

9 Juni 2025
DNA

DNA ME-16FX Manual

9 Juni 2025
TC Helicon

TC Helicon Fuse Manual

3 Juni 2025
ESI

ESI Amber i2 Manual

30 Marts 2025
ESI

ESI Amber i4 Manual

30 Marts 2025
UDG Gear

UDG Gear AlphaTheta XDJ-AZ Manual

8 Marts 2025
Roadstar

Roadstar TT-380BT-T Manual

19 Februar 2025
Roadstar

Roadstar HIF-1580BT Manual

18 Februar 2025
Roadstar

Roadstar TTR-630WD Manual

18 Februar 2025