Kramer AVoIP Manager Manual

Kramer AV forlænger AVoIP Manager

Læs gratis den danske manual til Kramer AVoIP Manager (4 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Kramer AVoIP Manager, eller vil du spørge andre brugere om produktet?

Side 1/4
AVoIP Manager Quick Start
P/N:
2 9 0 0 - 3 0 1 8 4 1 QS
Rev:
1
Scan to go to website
AVoIP Manager Quick GuideStart
This guide helps you install and use your AVoIP Manager for the first time.
Go to to downloadhttp://www.kramerav.com/downloads/AVoIP Manager the latest user manual and check
if firmware upgrades are available.
Step 1: Check whats bin the ox
AVoIP Manager Collaboration Device
1 VESA mounting bracket
1 Quick start guide
1 Power cords for US and EU
1 VESA screw set
Step 2: Get to know your AVoIP Manager
# Feature Function
1 3 x USB 3.0 Connectors Connect to USB local devices (for example, a USB camera, a
soundbar, microphone etc.).
2 Power Button with LED Press to power ON or turn OFF the device.
3 Power Connector Connect to the 12V DC power supply.
4 1 x HDMI OUT Connector Connect to an HDMI sink.
HDMI OUT 2 is unavailable.
5 - RJ 45 Connector Connect to a LAN (default mode).
Step 3: Mount the AVoIP Manager
AVoIP MANAGER can be installed on a flat surface / wall, rear of a monitor or rack mount using the included
VESA mounting bracket and screw set:
Mount AVoIP MANAGER on the mounting bracket
Attach the mounting bracket 2 AVoIP MANAGER to the with screws.
This step is required for all the options detailed below.
Mount or wall Mount of a to flat surface to the rear a monitor Mount to a rack mount
Secure the mounting bracket to a
flat surface / wall with dedicated
screws.
Secure the mounting bracket to the
VESA holes located on the rear of
the monitor.
Secure the mounting bracket(s) to the rack
mount with dedicated screws.
Only one AVoIP per network is allowed.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your AVOIP MANAGER.
1. Connect a USB device.
2. Connect an HDMI display.
3. Connect to the LAN (default mode).
If you wish to use a Kramer active optical pluggable HDMI cable with your AVOIP MANAGER, contact your local Kramer
office to assist in purchasing the correct cable.
Step 5: Connect the power
Connect the 12V DC power adapter to your AVOIP MANAGER and plug it into the mains electricity.
Caution:
There are no operator serviceable parts inside the unit.
Caution: The device is intended to be installed at a height of 2 meters or less.
Warning: Use only the Kramer Electronics power adapter that is provided with the unit.
Warning: Disconnect the power and unplug the unit from the wall before installing.
See www.KramerAV.com for updated safety information.
Step 6: AVOIP MANAGER User Integration
Prerequisites
AVoIP Manager is connected to both monitor & Internet, IP address is automatically updated and displayed in
the lower part of the For further details, refer to Refer to AVoIP Manager SW Box Installation Guide.display.


Produkt Specifikationer

Mærke: Kramer
Kategori: AV forlænger
Model: AVoIP Manager

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer AVoIP Manager stil et spørgsmål nedenfor, og andre brugere vil svare dig




AV forlænger Kramer Manualer

Kramer

Kramer EXT3-H-R Manual

25 Juni 2025
Kramer

Kramer EXT3-H-T Manual

25 Juni 2025
Kramer

Kramer EXT3-U3-T Manual

20 Januar 2025
Kramer

Kramer VP-427X2 Manual

19 December 2024
Kramer

Kramer TP-594Rxr Manual

19 December 2024
Kramer

Kramer TP-752R Manual

19 December 2024
Kramer

Kramer TP-780T Manual

19 December 2024
Kramer

Kramer TP-594Txr Manual

19 December 2024
Kramer

Kramer TP-752T Manual

19 December 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer