Kramer KAC-SCD-10 Manual
Kramer
Ikke kategoriseret
KAC-SCD-10
Læs gratis den danske manual til Kramer KAC-SCD-10 (41 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Kramer KAC-SCD-10, eller vil du spørge andre brugere om produktet?
Side 1/41
User's & Administrator’s Manual
KAC-SCD-10
Meeting Room Scheduler
Version 2.2
In this Manual, the following marketing names are interchangeable:
KAC-TCH-10
RX-PAD
KAC-CU-200
RXV-200
KAC-BAR-81
RXV-81
KAC-CAM-50M
RXVCam50M
KAC-CAM-CC-10
RXVCam10CC
KAC-SPK-15
RX-15
KAC-SPK-40
RX-40
KAC-SCD-10
RX-PANEL
User's Manual Contents
Version 2.2 3 RX-PANEL
Table of Contents
1 Introduction.................................................................................................................. 7
1.1 Highlights ........................................................................................................................ 7
1.2 Specifications .................................................................................................................. 7
2 Getting Started ............................................................................................................. 9
2.1 Before Getting Started .................................................................................................... 9
2.2 Positioning ...................................................................................................................... 9
2.3 Mounting ....................................................................................................................... 10
2.4 Cabling.......................................................................................................................... 11
2.5 Powering up .................................................................................................................. 11
2.6 Managing RX-PANEL ................................................................................................... 11
3 Using RX-PANEL ....................................................................................................... 13
3.1 Reserving a Meeting ..................................................................................................... 13
3.2 Managing a Reservation ............................................................................................... 14
3.3 Checking in ................................................................................................................... 15
3.4 Configuring User Settings ............................................................................................. 16
3.4.1 Configuring Accessibility .................................................................................................... 16
3.4.2 Rebooting the Device......................................................................................................... 17
3.4.3 Viewing Device Information ............................................................................................... 17
3.5 Configuring Admin Settings ........................................................................................... 18
3.5.1 Configuring Device Administration ..................................................................................... 18
3.5.2 Configuring Display Settings .............................................................................................. 19
3.5.3 Configuring Date and Time ................................................................................................ 20
3.5.4 Configuring Wi-Fi ............................................................................................................... 21
3.5.5 Configuring Bluetooth ........................................................................................................ 22
3.5.6 Configuring USB ................................................................................................................ 23
3.5.7 Configuring Power Saving ................................................................................................. 23
3.5.8 Configuring Security ........................................................................................................... 24
3.5.9 Configuring Language & Input ........................................................................................... 24
3.5.10 Modifying Network ............................................................................................................. 26
3.5.11 Configuring 802.1x Settings ............................................................................................... 27
3.5.12 Configuring VLAN Settings ................................................................................................ 28
4 Debugging .................................................................................................................. 31
4.1 Log Settings .................................................................................................................. 31
4.2 Voice Record ................................................................................................................ 33
4.3 Remote Logging ............................................................................................................ 33
4.4 Diagnostic Data ............................................................................................................. 34
4.5 Reset configuration ....................................................................................................... 34
4.6 User Data Reset ........................................................................................................... 35
4.7 Restart Teams App ....................................................................................................... 35
4.8 Debug Recording .......................................................................................................... 35
4.9 Erase all data (Factory Reset) ....................................................................................... 36
4.10 ADB .............................................................................................................................. 37
4.11 SSH .............................................................................................................................. 37
4.12 Screen Capture ............................................................................................................. 37
4.13 Remote Packet Capture ................................................................................................ 37
4.14 Enabling Advanced Meeting Functions ......................................................................... 37
RX-PANEL
User's Manual 4 Document #: LTRT-18290
This page is intentionally left blank.
User's Manual Contents
Version 2.2 5 RX-PANEL
Notice
Information contained in this document is believed to be accurate and reliable at the time of printing.
However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy
of printed material after the Date Published nor can it accept responsibility for errors or omissions.
Updates to this document can be downloaded from https://www.audiocodes.com/library/technical-
documents.
This document is subject to change without notice.
Date Published: Oct-02-2023
Trademarks
AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better, IPmedia,
Mediant, MediaPack, What’s Inside Matters, OSN, SmartTAP, VMAS, VoIPerfect, VoIPerfectHD,
Your Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice and CloudBond are trademarks
or registered trademarks of AudioCodes Limited All other products or trademarks are property of
their respective owners. Product specifications are subject to change without notice.
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with
unsorted waste. Please contact your local recycling authority for disposal of this product.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized
AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes
products and for contact information, please visit our Web site at
https://www.audiocodes.com/services-support/maintenance-and-support
.
Stay in the Loop with AudioCodes
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments
(suggestions or errors) regarding this document, please fill out the Documentation Feedback form
on our Web site at http://online.audiocodes.com/documentation-feedback
.
Related Documentation
Document Name
RX-PANEL Meeting Room Scheduler Datasheet
RX-PANEL Meeting Room Scheduler Quick Guide
One Voice Operation Center (OVOC) Release Notes
One Voice Operation Center (OVOC) User’s Manual
Device Manager Administrator’s Manual
RX-PANEL
User's Manual 6 Document #: LTRT-18290
This page is intentionally left blank.
User's Manual 1. Introduction
Version 2.2 7 RX-PANEL
1 Introduction
The AudioCodes PANEL-RX Meeting Room Scheduler is a purpose-built Microsoft Teams Panel
with an intuitive touchscreen display. Neatly installed right at the entrance to the meeting room, the
RX-PANEL’s brightly colored status LED enables users to quickly see the meeting room’s
availability from a distance. Users can also view the meeting details on its sleek and clear LCD
screen and reserve a meeting room on the spot.
1.1 Highlights
RX-PANEL supports the following features:
Utilizes plug-and-play simplicity to boost the meeting room experience with a dedicated
panel showing the meeting details and room availability.
Easily reserve the room for ad-hoc meetings.
Unique, clearly-visible status LED indicating meeting space availability.
Glass and wall mountable for a professional and spotless appearance.
Dedicated special touch buttons (Home and Back).
High-resolution 8-inch touchscreen.
Runs Android 12 for improved security.
Can be managed by AudioCodes Device Manager.
Part number: TEAMS-RX-PANEL– MSRP
1.2 Specifications
The following table shows the RX-PANEL specifications.
Feature Description
LCD
•
High resolution touch LCD, anti fingerprints, 1280 x 800
Built-in keys
•
Dedicated touch keys – Home and Back
Power
•
PoE Class 3 or external power supply
Connectivity
•
Dual Band Wi-Fi
• Bluetooth 5.0
• PoE Class 3
•
Ethernet
LED
•
RGB Status LED
Dimensions (W x H x D mm) 223.4 x 155.9 x 24.4
Weight (kg) 0.8
Mounting Wall and glass mount (the glass option should be ordered separately)
Certifications Microsoft Teams Rooms – coming soon Q3 2003
Compatibility Works with Android and Windows based meeting room devices
RX-PANEL
User's Manual 8 Document #: LTRT-18290
This page is intentionally left blank.
User's Manual 2. Getting Started
Version 2.2 9 RX-PANEL
2 Getting Started
The figure below shows the physical appearance of AudioCodes’ RX-PANEL Meeting Room
Scheduler.
See here
for more information about the device.
2.1 Before Getting Started
Make sure you received the following in the shipped box:
Ethernet cable
4 screws, 4 wall anchors, 1 template (for concrete wall mount)
Glass-mounting bracket (for glass partition mount)
Note: Power Supply (PS) is not supplied but can be ordered separately.
2.2 Positioning
Position the device at the entrance to a conference room. Mount the device on a:
concrete wall -or-
glass partition
Note: Note that the device is suitable for mounting at a height no more than 2m.
RX-PANEL
User's Manual 10 Document #: LTRT-18290
2.3 Mounting
Concrete wall (see figure below)
Use the supplied template to mark locations for 4 wall anchors; insert the 4 screws into
them.
Glass partition (see figure below)
Remove the bracket’s adhesive strip cover, fix the bracket on the glass and hang RX-
PANEL on it.
User's Manual 2. Getting Started
Version 2.2 11 RX-PANEL
2.4 Cabling
The figures below show the RX-PANEL rear connector ports.
# Description
1
•
The figure above left shows the ports’ location (concealed view).
•
The figure above right shows the exposed view.
2
DC jack for 12V power supply
3
Reset (Insert pin, unplug PoE, keep pin inserted, plug in PoE, keep pressing for 10 seconds)
4
Ethernet LAN/PoE GbE, RJ-45
5
USB Type C connector (for maintenance purposes) (see the User’s & Administrator’s Manual)
2.5 Powering up
Connect the RX-PANEL LAN/PoE to any PoE Ethernet switch; the unit powers up.
2.6 Managing RX-PANEL
RX-PANEL is managed by AudioCodes’ One Voice Operations Center | Device Manager.
Management includes:
Firmware management / upgrade
Alarm management
APK upgrade
1
2
4
5
3
RX-PANEL
User's Manual 12 Document #: LTRT-18290
This page is intentionally left blank.
User's Manual 3. Using RX-PANEL
Version 2.2 13 RX-PANEL
3 Using RX-PANEL
Use the table below as reference to the following figure.
Use this table as reference to the preceding figure:
L-R Description
1
Space availability status LED, viewable from a distance:
Green = meeting space available; optionally reserve it right now
Red or purple = meeting space unavailable
Flashing red is a system status alert indicating, for example, recovery mode.
Flashing green and blue indicates restore to defaults.
2
Meeting details; meeting time | date | organizer
3
Meeting space availability status
4
‘Back’ button; Tap to return to the screen previously accessed
5
All meeting spaces and availability statuses
6
Tap to reserve an available meeting space for an ad hoc meeting
7
Tap to return to the home screen from any screen.
Long-press to access Settings.
Note: Admin can change background wallpaper | color of status indicator | text contrast, etc.
3.1 Reserving a Meeting
You can reserve an ad hoc meeting when the LED is green.
To reserve an ad hoc meeting:
1. Activate RX-PANEL.
2
3
5
4
6
7
1
RX-PANEL
User's Manual 14 Document #: LTRT-18290
• Reserve a room using the QR Code in the home screen. RX-PANEL allows people to
reserve the meeting room using the QR code. For more information about the feature,
see here. For information about reserving a room using QR code, see here
. This feature
is enabled by default and can be disabled under Device settings > Admin
settings > Meetings.
• [
When RX-PANEL is paired with a Microsoft Teams Room on Android device (RXV81 -
OR- RXV200), tap Reserve.
2. Tap < or > to navigate to the end time.
3. Tap Reserve.
3.2 Managing a Reservation
To manage reservation:
1. Activate RX-PANEL and tap Manage.
User's Manual 3. Using RX-PANEL
Version 2.2 15 RX-PANEL
2. Tap Check out and in the verification prompt, tap Check out; this ends your room reservation.
3. Optionally, tap Extend room reservation.
4. Choose the end time and then tap Reserve.
3.3 Checking in
To check in:
1. Activate RX-PANEL.
2. Tap Check in
RX-PANEL
User's Manual 16 Document #: LTRT-18290
3.4 Configuring User Settings
Note: Long-press the button on the device.
3.4.1 Configuring Accessibility
RX-PANEL features an accessibility service that allows low-vision users to interact with the device
without difficulty. The feature improves the experience of these users.
To configure Accessibility:
1. Under ‘User’ settings, tap Accessibility.
2. Adjust the font size according to preference.
3. Adjust the contrast according to preference.
4. Adjust the color correction according to preference.
User's Manual 3. Using RX-PANEL
Version 2.2 17 RX-PANEL
3.4.2 Rebooting the Device
You can reboot the device.
To reboot the device:
1. Under ‘User’ settings, tap the Reboot setting.
2. Tap Reboot and in the verification prompt displayed, tap OK.
3.4.3 Viewing Device Information
You can view information about the device.
To view information about the device:
1. Under ‘User’ settings, tap About device.
2. Tap More to display more information.
RX-PANEL
User's Manual 18 Document #: LTRT-18290
3. Tap Status.
3.5 Configuring Admin Settings
3.5.1 Configuring Device Administration
To configure device administration:
1. Under ‘Device admin settings’, tap Device Administration.
2. Tap Login, enter your password using the virtual keyboard displayed, and then tap OK.
User's Manual 3. Using RX-PANEL
Version 2.2 19 RX-PANEL
3. Tap Logout user to log out.
4. Tap Account Signout to sign out from Teams.
5. Tap Change password to replace your old password with a new one. Use the virtual keyboard
displayed to define the old and the new.
3.5.2 Configuring Display Settings
To configure display settings:
1. Under ‘Device admin settings’, tap Display.
2. Tap the Brightness level scale to decrease or increase screen brightness.
3. Tap Screen timeout.
4. Tap the option of your choice and then tap
← to go back to the previous screen.
5. Tap Font size to make the text on the screen smaller or larger than the default and then tap
← to go back to the previous screen.
6. Tap Screen saver.
RX-PANEL
User's Manual 20 Document #: LTRT-18290
7. Tap Off to activate (or On to deactivate).
8. Tap Current screen saver to change Clock > Colors or Colors > Clock depending on your
preference and then tap
← to go back.
3.5.3 Configuring Date and Time
To configure date and time:
1. Under ‘Device admin settings’, tap Date & time.
2. Activate Set time automatically for date and time to automatically be retrieved from the
deployed Network Time Protocol (NTP) server. If this setting is activated, the following two
settings (Date and Time) will be read only.
3. Tap Date to manually set the date in the calendar that is displayed.
4. Tap Time to manually set the time on the clock that is displayed.
5. Activate Set time zone automatically for the time zone to automatically be detected. If this
setting is activated, the following setting (Time zone) will be read only.
User's Manual 3. Using RX-PANEL
Version 2.2 21 RX-PANEL
Note: AudioCodes' devices feature an Automatic Time Zone Detection mechanism that allows
the device to automatically detect the time zone via geographical location.
6. Tap Time zone if the previous setting Set time zone automatically is deactivated.
7. Tap Region and select the region in which you are located; the Time zone setting will be read
only.
3.5.4 Configuring Wi-Fi
Admins can configure the device’s Wi-Fi settings. The settings are concealed from the user's view.
Note: The Wi-Fi connection is transparent to users; which frequency is used, 2.4 GHz or 5
GHz, is made for users by the device; users cannot disable one or the other.
To configure Wi-Fi:
1. Under ‘Device admin settings’, tap Wi-Fi.
2. Activate Use Wi-Fi and then view a list of available connections.
RX-PANEL
User's Manual 22 Document #: LTRT-18290
3. Select the Wi-Fi network you want and then use the virtual keyboard displayed to enter the
password.
3.5.5 Configuring Bluetooth
Admins can configure the device’s Bluetooth settings. Hands free profile where the phone is able
to connect to Bluetooth headset or speaker.
To configure Bluetooth:
1. Under ‘Device admin settings’, tap Bluetooth.
2. Activate Use Bluetooth and then tap + Pair new device.
3. Tap a device with which to pair RX-PANEL.
4. Tap PAIR.
User's Manual 3. Using RX-PANEL
Version 2.2 23 RX-PANEL
3.5.6 Configuring USB
To configure USB:
1. Under ‘Device admin settings’, tap USB.
2. Activate Audio Device Mode and then tap
← to go back.
3.5.7 Configuring Power Saving
To configure Power Saving:
1. Under ‘Device admin settings’, tap Power Saving.
2. Activate Power Saving and then configure Start time and then End time.
3. Tap
← to go back.
RX-PANEL
User's Manual 24 Document #: LTRT-18290
3.5.8 Configuring Security
To configure Security:
1. Under ‘Device admin settings’, tap Security.
2. Under Privacy, activate/deactivate Show passwords.
3. Tap
← to go back.
3.5.9 Configuring Language & Input
To configure Language & Input:
1. Under ‘Device admin settings’, tap Language & Input.
2. Touch Languages.
User's Manual 3. Using RX-PANEL
Version 2.2 25 RX-PANEL
3. Select a language and then view the Changing language for Teams app counter displayed
until the language is changed. Tap
← to go back.
4. Tap Manage on-screen keyboards.
5. Define settings under ‘Preferences’ and ‘Advanced’ if necessary.
RX-PANEL
User's Manual 26 Document #: LTRT-18290
6. Configure your keyboard preferences, tap ← to go back and then tap Advanced.
7. Tap
← to go back and then again tap Languages & input.
3.5.10 Modifying Network
Enables admins to determine network information and to modify network settings.
To modify network settings:
1. Under ‘Device admin settings’, tap Modify Network.
2. View read-only settings IP address, IP settings and Network state.
3. Tap IP settings.
User's Manual 3. Using RX-PANEL
Version 2.2 27 RX-PANEL
4. Select DHCP or Static and tap OK.
5. Tap Enable PC Port to enable the PC port. Tap Enable PC Port Mirror to enable PC port
mirror. RX-PANEL supports the port mirroring network monitoring technique of copying and
sending network packets transmitted as input from a device port to another port of a monitoring
device for enhanced analysis and debugging capability.
6. Tap Proxy to configure RX-PANEL with an HTTP Proxy server.
7. Tap
← to go back.
3.5.11 Configuring 802.1x Settings
Admins can configure 802.1x Settings.
To configure 802.1x settings:
1. Under ‘Device admin settings’, tap 802.1x Settings.
2. Tap Enable 801.1x and then tap Save.
RX-PANEL
User's Manual 28 Document #: LTRT-18290
3.5.12 Configuring VLAN Settings
Admins can configure VLAN Settings. VLAN Settings allow you to configure the VLAN mode
Manual, CDP only or LLDP only. Note that LLDP switch information is retrieved (for location
purposes) when parameter network/lan/lldp/enabled=1 (even when VLAN is retrieved from CDP or
VLAN is disabled or VLAN is Manual).
To configure VLAN settings:
1. Under ‘Device admin settings’, tap VLAN Settings.
2. Tap VLAN Discovery mode.
• Cisco Discovery Protocol (CDP) is a Cisco proprietary Data Link Layer protocol
• Link Layer Discovery Protocol (LLDP) is a standard, layer two discovery protocol
3. Select the mode you require and then tap OK. If you select Manual configuration, this screen
opens:
User's Manual 3. Using RX-PANEL
Version 2.2 29 RX-PANEL
4. Tap VLAN ID.
5. Enter the VLAN ID (range 0-4094) using the virtual keyboard and then tap OK.
6. Tap VLAN Priority.
RX-PANEL
User's Manual 30 Document #: LTRT-18290
7. Enter the VLAN Priority (range 0-7) using the virtual keyboard and then tap OK.
User's Manual 4. Debugging
Version 2.2 31 RX-PANEL
4 Debugging
AudioCodes RX-PANEL leverages SSH as a debugging interface.
AudioCodes recommends that customers disable SSH on RX-PANEL via AudioCodes'
Device Manager (OVOC).
AudioCodes recommends changing the Admin password from the default, via AudioCodes'
Device Manager (OVOC).
When RX-PANEL - or multiple RX-PANELs - needs to be debugged, users can enable SSH
on it / them, access SSH with the new Admin password for the debugging phase, and
disable SSH once debugging is finished.
Note: SSH is by default disabled and can be enabled with Administrator permissions in the
RX-PANEL screen (Device Administration > Debugging > SSH).
4.1 Log Settings
Admins can configure log settings such as Log Level, Log Package Filter, Log Tag Filter and Log
Buffer Filter.
To log settings:
1. Tap Log settings.
2. Tap Log Level.
RX-PANEL
User's Manual 32 Document #: LTRT-18290
3. Tap the level you require.
4. Tap Log Package Filter.
5. Tap Log Tag Filter.
6. Tap Log Buffer Filter.
7. Tap the level you require and then tap OK.
User's Manual 4. Debugging
Version 2.2 33 RX-PANEL
4.2 Voice Record
Read only setting.
4.3 Remote Logging
Remote Logging via Syslog provides information relevant to device issues (not Teams application
issues). When performing Remote Logging via Syslog, the logs are collected in real time.
To configure remote logging capability:
1. Tap Remote logging.
2. Tap Remote IP address.
3. Enter the IP address using the virtual keyboard, tap OK and then tap Remote port.
RX-PANEL
User's Manual 34 Document #: LTRT-18290
4. Enter the number of the remote port using the virtual keyboard and then tap OK.
4.4 Diagnostic Data
Network administrators can get diagnostics information to facilitate debugging.
Note: Administrators who need to get diagnostics info from the device can dump the logs to
the phone’s Secure Digital (SD) Card and then later collect them using Secure Copy Protocol
(SCP) based on Secure Shell (SSH) protocol. Whenever an issue occurs, the administrator
can dump the logs into the SD Card.
To get diagnostic data:
Tap Diagnostic data.
4.5 Reset configuration
Admins can get the device to perform a restore to default factory settings.
To reset configuration:
Tap Reset configuration.
User's Manual 4. Debugging
Version 2.2 35 RX-PANEL
4.6 User Data Reset
RX-PANEL provides a User data reset option that is similar to factory reset except that this option
preserves predefined data after firmware upgrade.
To access the functionality:
Tap User data reset.
Note: After ‘User data reset’, network settings are preserved.
4.7 Restart Teams App
Refreshes the device’s user interface.
4.8 Debug Recording
Admins can opt to get audio debug recording logs from the device screen. The purpose of these
logs is for issues related to media.
To get audio debug recording logs:
1. Tap Debugging > Debug Recording.
2. Tap Remote IP address.
RX-PANEL
User's Manual 36 Document #: LTRT-18290
3. Enter the remote IP address, tap OK and then tap Remote port.
4. Enter the remote port and then tap OK.
4.9 Erase all data (Factory Reset)
Admins can get the device to perform a restore to default factory settings.
To erase all data:
Tap Erase all data.
User's Manual 4. Debugging
Version 2.2 37 RX-PANEL
4.10 ADB
Admins can get logs using UUID over ADB shell.
Note: To use this method of getting new logs, Android Debug Bridge (ADB), a command-line
utility included with Google's Android SDK, must be installed on your PC.
4.11 SSH
Admins can activate a recording using AudioCodes' SSH protocol based Android Device Utility.
See here
for more information.
4.12 Screen Capture
Admins can grab a screen capture using AudioCodes' SSH protocol based Android Device Utility.
See here
for more information.
4.13 Remote Packet Capture
Admins can capture traffic using 'rpcapd' network sniffer application. The ‘rpcapd’ (Remote Packet
Capture) network sniffer application allows the admin to analyze and debug Android traffic on their
desktop PC using the app's integral SSH server. SSH is by default disabled and can be enabled
with admin permission in the device screen.
4.14 Enabling Advanced Meeting Functions
To enable advanced meeting functions:
1. Click the Device Pairing option in ‘Teams Admin Settings’ menu and select your device (to
pair it at the Teams level):
2. Click the Wallpapers option to select a wallpaper of your choice.
RX-PANEL
User's Manual 38 Document #: LTRT-18290
3. Click the LED settings option to select the LED color indicating busy state.
4. Click the Meetings option to define advanced meeting check-in functions.
User's Manual 4. Debugging
Version 2.2 39 RX-PANEL
RX-PANEL
User's Manual 40 Document #: LTRT-18290
This page is intentionally left blank.
International Headquarters
1 Hayarden Street,
Airport City
Lod 7019900, Israel
Tel: +972-3-976-4000
Fax: +972-3-976-4040
AudioCodes Inc.
80 Kingsbridge Rd.,
Piscataway, NJ 08854, USA
Tel: +1-732-469-0880
Fax: +1-732-469-2298
Contact us
:
https://www.audiocodes.com/corporate/offices-worldwide
Website:
https://www.audiocodes.com/
©2023 AudioCodes Ltd. All rights reserved. AudioCodes, AC, HD VoIP, HD VoIP Sounds Better, IPmedia, Mediant,
MediaPack, What’s Inside Matters, OSN, SmartTAP, User Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your
Gateway To VoIP, 3GX, VocaNom and AudioCodes One Voice are trademarks or registered trademarks of AudioCodes
Limited. All other products or trademarks are property of their respective owners. Product specifications are subject to
change without notice.
Document #: LTRT-18290
Produkt Specifikationer
| Mærke: | Kramer |
| Kategori: | Ikke kategoriseret |
| Model: | KAC-SCD-10 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Kramer KAC-SCD-10 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Kramer Manualer
27 August 2025
27 August 2025
26 August 2025
26 August 2025
26 August 2025
26 August 2025
26 August 2025
26 August 2025
26 August 2025
22 Juli 2025
Ikke kategoriseret Manualer
- Geovision
- Noveen
- Sortimo
- Euromaid
- Termozeta
- Patton
- ElectriQ
- CVW
- BIG
- Graff
- Dreame
- Danfoss
- Crazy Tube Circuits
- Qu-Bit
- Séura
Nyeste Ikke kategoriseret Manualer
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025