Kramer KDS-8-MNGR Manual

Kramer AV forlænger KDS-8-MNGR

Læs gratis den danske manual til Kramer KDS-8-MNGR (4 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Kramer KDS-8-MNGR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

KDS-8-MNGR Quick Start

P/N:

2 9 0 0 - 3 0 1 4 5 9 QS

Rev:

Scan for full manual

KDS-8-MNGR Quick Start Guide

This guide helps you install and use your KDS-8-MNGR for the first time.

Go to www.kramerav.com/downloads/KDS-8-MNGR to download the latest user manual and check if

rmware upgrades are available.

Step 1: Check in the b what’s ox

KDS-8-MNGR SDVoE Manager

1 Quick start guide

1 Power adapter and cord

1 Rubber foot square

Step 2: Get to know your -8-MNGR KDS

Feature

Function

POWER LED

This LED illuminates to indicate the unit is on and receiving power.

IR Window

For future use.

Feature

Function

IR EXT Port

For future use.

CONTROL 5-pin Terminal

Block Connector

For future u .se

RS-232 3-pin Terminal Block

Connector

Connect to a PC, laptop or other serial control device with a 3-pin adapter cable, to control

the unit via RS-232.

TRIGGER IN 10-pin Terminal

Block Connector

Connect any device with trigger switch functionality such as window security alarms, motion

detectors, door switches, etc.

Each of the 8 trigger inputs will activate the associated macro (1 to 8) when triggered.

HDMI OUT Port

Connect to a standard HDMI ™ display to view the unit’s current status information and

access the WebGUI directly without a PC.

HDMI output is locked to a resolution of 1080p@60Hz.

USB Port

Connect a USB mouse and keyboard to control the unit’s WebGUI displayed on the HDMI

output port. Firmware update via USB is also supported.

Specialized USB control devices, such as a touch panel, should be connected

before the unit is powered on.

LAN 2 Port

Connect directly, or through a network switch, to your PC/ laptop to control the unit via

WebGUI/Telnet.

# Feature Function

LAN 1(POE) Port

This port is used to connect to the SDVoE devices to be controlled. Connect to the SDVoE

units’ private network through their dedicated network switch, to enable detection and control

over those units.

If the connected network switch supports the IEEE 802.3af 2003 PoE (Power over

Ethernet) standard, this unit can optionally be powered directly via this Ethernet port.

RESET Button

Press and hold for 3 seconds to reset the unit to its factory defaults, including Ethernet

settings.

While the reset is in process, the LEDs on the front of the unit flash. Once the reset

is complete, the unit returns to normal operation.

DC 5V Port

Plug the 5V DC power adapter into the unit and connect it to an AC wall outlet for power.

(Optional, not required if the unit is powered via PoE).

Step 3: Mount -8-MNGR KDS

Install KDS-8-MNGR using one of the following methods:

• Attach the rubber foot pad and place the unit on a at surface.

• Fasten a bracket on each side of the unit to a at surface

(see www.kramerav.com/downloads/K -8-MNGRDS ).

• Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your KDS-8-MNGR.

For optimal performance, use the recommended Kramer cables available at . www.kramerav.com/product/KDS-8-MNGR

Using third-party cables may cause damage!

Produkt Specifikationer

Mærke:	Kramer
Kategori:	AV forlænger
Model:	KDS-8-MNGR

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer KDS-8-MNGR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

AV forlænger Kramer Manualer

Kramer EXT3-U3-T Manual

20 Januar 2025

Kramer VP-427X2 Manual

19 December 2024

Kramer TP-594Rxr Manual

19 December 2024

Kramer TP-752R Manual

19 December 2024

Kramer TP-780T Manual

19 December 2024

Kramer TP-594Txr Manual

19 December 2024

Kramer TP-752T Manual

19 December 2024

Kramer TP-583Txr Manual

19 December 2024

Kramer W-3H2 Manual

19 December 2024

Kramer WP-872xr Manual

19 December 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer

Genexis Elite HX30 Manual

8 Juni 2025

Genexis Elite HX40 Manual

8 Juni 2025

Provision-ISR PR-HDoNet+ Manual

8 April 2025

Apantac DP-FIB-II Manual

25 Februar 2025

Adder Link X-DVI PRO-DL Manual

28 Januar 2025

Adder Link X100 Manual

28 Januar 2025

Kopul XLR4F-RJ45 Manual

14 Januar 2025

Kopul RM-4X4XMFRJ45 Manual

13 Januar 2025

Planet VF-106G-KIT Manual

13 Januar 2025

Tripp Lite B127-008-D Manual

13 Januar 2025