Kramer OSP-SM10S Manual

Kramer Ikke kategoriseret OSP-SM10S

Læs gratis den danske manual til Kramer OSP-SM10S (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Kramer OSP-SM10S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

OSP-SM10S Quick Start

P/N:

2 9 0 0 - 3 0 1 2 3 8 QS

Rev:

Scan for full manual

OSP-SM10S Quick Start Guide

This guide helps you install and use your OSP-SM10S for the first time.

Go to www.kramerav.com/downloads/OSP-SM10S to download the latest user manual and check if

rmware upgrades are available.

Step 1: Check in the b what’s ox

2 OSP-SM10S 10G SFP+ Simplex Transceivers (A and B)

1 Quick start guide

Step 2: Get to know your -SM10S OSP

Feature

Function

LC Connectors

For connecting ber optic cable. Covered with protective cap when not in use.

Bail (Handle)

Pull down the handle for easy removal of the transceiver from the optical device.

Protective Cap

Protects the LC connector from dust.

Note: When transporting or storing an unconnected device, keep the cap on to protect

against dust.

SFP+ Module Interface

Connects to the optical module SFP+ port.

Step 3: Safety Instructions

Warning: Class 1 Laser Product:

• Invisible laser radiation present.

• Avoid long-term viewing of laser.

• Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes,

microscopes and magnifying lenses, but not spectacles or contact lenses).

• Avoid placing optical devices in the emitted beam that could cause the concentration of the

laser radiation to be increased.

• Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Operation and Installation Warnings

• designed to be used with LC(PC) and LC(UPC) cable connectors. Using an LC(APC) connector OSP-SM10S is

causes poor performance and can damage the optical module connector.

• Always inspect and clean the connectors before you make a connection.

• Always use the connector housing to plug or unplug a ber cable.

• Never touch the end face of the ber connectors.

Step 5: Install the OSP-SM10S

Always install transceiver to one extension device and transceiver B to the other A

extension pairing device.

To install the 10G SFP+ Simplex Transceiver:

1. Make sure the bail is pushed up, in the closed position.

2. Insert the OSP SFP+ transceiver into the relevant optical device SFP+ slot

and push it in until it clicks.

3. Before connecting the optical ber cable, remove the protective cap and store

it in a safe place for future use.

To remove the 10G SFP+ Simplex Transceiver:

1. Pull the bail down to release the transceiver unit.

2. Pull the transceiver unit out by the bail from the optical device SFP+ slot.

3. If needed, put the protective cap back on.

For optimum range and performance use the recommended Kramer cables available at

www.kramerav.com/product/OSP-SM10S. Using third-party cables may cause damage!

Step 6: Technical Specications

Transceiver Wavelength:

A: 1270 DFB transmitter /1330 receiver nm

B: 1330 DFB transmitter /1270 receiver nm

Optical Fiber Line Type:

Single-mode

Optical Transmitter Type:

DFB

Typical Optical Transmission Power:

-5dBm

Typical Optical Maximum Receiver

Sensitivity:

-14dBm

Typical Optical Maximum Loss Budget:

9dB

Ports:

1 strand ber optic LC (PC/UPC) connector for reception and transmission

SFP+ compliant pluggable interface

Note: Do not use with LC(APC) connectors.

Data Rate:

10Gbps

Maximum Reach

24km

Standards Compliance:

IEEE 802.3 , SFF-8431, SFF- AE 8472

Laser Safety Compliance:

Laser Class I

Regulatory Certications:

FDA: CDRH 1040.10

TUV: EN60950-1:2006+A11+A1+A12+A2; EN60825-1:2014; EN60825-

2:2004+A1+A2

UL: 60950-1; CSA C22.2 No. 60950-1-07:2014

EMC CE: EN 55032:2010; EN 55024:2010

CB: IEC 60950-1 2nd Edition :2014

RoHS: Directive 2011/65/EU

Operating Temperature:

0° to 70°C

Storage Temperature:

-40° to 85°C

Humidity:

5% to 95% RH

Power Consumption:

Product Dimensions:

1.33cm x 5.7cm x 0.85cm (0.52" x 2.2" x 0.33") W, D, H

Product Weight:

0.018kg (0.04lbs)

Shipping Dimensions:

4.1cm x 12.6cm x 8.4cm (1.6" x 5" x 3.3") W, D H ,

Shipping Weight:

0.06kg (0.13lbs)

Specications are subject to change without notice at www.kramerav.com

Produkt Specifikationer

Mærke:	Kramer
Kategori:	Ikke kategoriseret
Model:	OSP-SM10S

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer OSP-SM10S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Kramer Manualer

Kramer VP-8x8AK Manual

22 Juli 2025

Kramer VP-41 Manual

22 Juli 2025

Kramer VA-1VGAN Manual

22 Juli 2025

Kramer VA-1DVIN Manual

22 Juli 2025

Kramer VP-88K Manual

21 Juli 2025

Kramer RK-KVM-1U-FLANGE Manual

21 Juli 2025

Kramer SL-280 Manual

21 Juli 2025

Kramer RC-306 Manual

21 Juli 2025

Kramer VP-8x8TP Manual

21 Juli 2025

Kramer VS-84HN Manual

21 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Netter Vibration NEG 50200 Manual

17 August 2025

D-Link DCS-34-3 Manual

17 August 2025

MSW -PU-30 Manual

17 August 2025

MSW -PLO-375 Manual

17 August 2025

YA-MAN Photo PLUS Shiny Manual

17 August 2025

Mueller SC 28.23 pro4 Manual

17 August 2025

Kenmore PM1010 Manual

17 August 2025

Ecler VEO-XRI2L Manual

17 August 2025

Mueller SC 98.10 pro4 Manual

17 August 2025

Mueller SC 93.20 pro Manual

17 August 2025