Kramer RK-UT1 Manual

Kramer Ikke kategoriseret RK-UT1

Læs gratis den danske manual til Kramer RK-UT1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Kramer RK-UT1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RK-UT1 Quick Start (P/N: 2900- 896QS REV 1)300

P/N:

2900- 300896QS

Rev:

Scan for full manual

RK-UT1 Quick Start Guide

This guide helps you install and use your RK-UT1 for the first time.

Go to www.kramerav.com/downloads/ -UT1RK to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the b ox

RK-UT1 Under the Table Enclosure

6 wood mounting screws

1 Quick start guide

20 M3x5 screws

Step 2: Get to know your - RK UT1

Mount any of the following combinations of Kramer

1U products (1/2-19" 1U units, 1/4-19" 1U units, 1/8-

19" 1U units and separately, up to two 6.5"-1U units)

in the rack adapter. If empty spaces remainRK-UT1 ,

you can close them with blank panels (optional).

Step 3: Mount devices onto the - RK UT1

The underside TOOL mounting area RK-UT1

includes a set of screw holes that are suitable for

any combination of units.

To mount a unit on the -UT1: RK

1. Place the rst unit on the rack (for example, the

Kramer ). PA-120Z

2. While holding the PA-120Z in place, ip over the

RK-UT1.

3. Attach the appropriate number of M3x5 screws

(supplied through the holes on the to the ) RK-UT1

underside of the . PA-120Z

4. Repeat steps 1 to 3 for all additional devices.

To install the -UT1 underneath a table: RK

1. Place the unit the underside of a table and mark on

the correct location (of the table mounting screw

holes).

2. Insert the six M4.2X18 wood screws (supplied) into

the six rim screw holes (three on each side) and

tighten them to attach the to the table. RK-UT1

If your Kramer device not have screw holes on its does

underside, mount it via the screw holes on the sides of

the . RK-UT1

To mount a blank panel (optional) to cover any empty

rack spaces:

1. Place the blank panel in place.

2. Insert two M3x5 screws through the holes on the

RK-UT1 that t the holes on the blank panel

(optional, not supplied).

Technical Specifications

Environmental

Conditions

Temperature Range

-40° to +70°C (-40° to 158°F)

Humidity

10% to 90%, RHL non-condensing

Regulatory Compliance

Safety

Environmental

RoHs, WEEE

Enclosure

Type

Aluminum

General

Net Dimensions

19-inch (W), 7-inch (D) 1U (H)

Shipping Dimensions (W, D, H)

49.5cm x 20.2cm x 5 cm

(19.5" x 7 5" x 1 7") .9 .9

Net Weight

2.18kg (4.8lbs)

Shipping Weight

2.88kg (6 5lbs) approx. .3

Accessories

Included

20 M3x5 screws, 6 M4.2X18 wood screws

Specications are subject to change without notice at www.kramerav.com

Produkt Specifikationer

Mærke:	Kramer
Kategori:	Ikke kategoriseret
Model:	RK-UT1

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer RK-UT1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Kramer Manualer

Kramer C-CU32/UC+H Manual

20 Februar 2025

Kramer AD-RING Manual

3 Januar 2025

Kramer VSM-4x4A Manual

19 December 2024

Kramer VS-6464DN-EM Manual

19 December 2024

Kramer VIA GO3 Manual

19 December 2024

Kramer VS-8FDxl Manual

19 December 2024

Kramer VA-4X Manual

19 December 2024

Kramer VA-14 Manual

19 December 2024

Kramer VS-48HDxl Manual

19 December 2024

Kramer VS-44HDxl Manual

19 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025