Kramer VIA GO3 Manual

Kramer Ikke kategoriseret VIA GO3

Læs gratis den danske manual til Kramer VIA GO3 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Kramer VIA GO3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

VIA GO3 Quick Start

P/N:

2900- 301786QS

Rev:

Scan to go to website

VIA GO3 Quick Guide Start

For Installer

This guide helps you install and use your VIA GO3 for the first time.

Go to t

https://www.kramerav.com/product/VIA GO3 o download the latest user manual and check if

firmware upgrades are available.

Step 1: Check what’s bin the ox

VIA GO3 Collaboration Device

1 VESA mounting bracket

1 Quick start guide

1 Power cords EU for US and

1 VESA screw set

Step 2: Get to know your VIA GO3

# ction Feature Fun

3 x 3.0 ConnectorUSB DEVICE

Connect to a USB device, for example, a USB speaker.

Power Button with LED

Press to power ON or turn OFF the device.

Power Connector

Connect to the 12V DC power supply.

1 x HDMI OUT Connector

Connect to an HDMI sink.

HDMI OUT 2 is unavailable.

RJ-45 Connector

Connect to a LAN (default mode).

Step 3: O3 Mount VIA G

VIA GO3 can be installed on a flat surface / , wall rear of a or rack mount monitor using the included VESA mounting bracket and

screw set:

M to ount VIA GO3 the Mounting Bracket

1. Attach the mounting bracket to the VIA GO3 with 2 screws.

This step is required for all options detailed below.

To Mount to a Flat Surface / Wall

To Mount to rear of monitor

To Mount to a Rack Mount

Secure the mounting bracket to a

flat surface / wall with dedicated

screws.

Secure the mounting bracket to VESA

holes located on rear of monitor.

Secure the mounting bracket(s) to the rack

mount with dedicated screws.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VIA GO3.

1. . Connect a USB device

2. Connect an HDMI

display.

3. Connect to the LAN

(default mode).

If you wish to use a

Kramer active optical

pluggable HDMI cable

with your VIA GO3,

contact your local

Kramer office to assist

in purchasing the

correct cable.

To achieve specified extension distances, use the recommended Kramer cables

available at www.kramerav.com/product/VIA GO3.

Using third

- party cables may cause damage!

Step 5: Connect power

Connect the 12V DC power adapter to and plug it into the mains electricity.VIA GO3

Caution:

There are no operator serviceable parts inside the unit.

Caution:

The device is intended to be installed at a height of 2 meters or less.

Warning:

Use only the Kramer Electronics power adapter that is provided with the unit.

Warning:

Disconnect the power and unplug the unit from the wall before installing.

See www.KramerAV.com for updated safety information.

Step 6: Configure VIA GO3

VIA is generally pre installed and should work right out of the box once connected to the network.-

If different VIA settings need to be adjusted, logging into the Gateway web interface will be necessary to customize the

settings according to network, customer, or IT requirements.

To open the VIA Gateway web interface for configuration, network connectivity is required onnect the VIA box to the local . C

network to begin.

Produkt Specifikationer

Mærke:	Kramer
Kategori:	Ikke kategoriseret
Model:	VIA GO3

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer VIA GO3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Kramer Manualer

Kramer C-CU32/UC+H Manual

20 Februar 2025

Kramer AD-RING Manual

3 Januar 2025

Kramer VSM-4x4A Manual

19 December 2024

Kramer VS-6464DN-EM Manual

19 December 2024

Kramer VIA GO3 Manual

19 December 2024

Kramer VS-8FDxl Manual

19 December 2024

Kramer VA-4X Manual

19 December 2024

Kramer VA-14 Manual

19 December 2024

Kramer VS-48HDxl Manual

19 December 2024

Kramer VS-44HDxl Manual

19 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony RM-V202T Manual

15 Juni 2025

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025

Kohler K-10124 Manual

15 Juni 2025

Planet Audio P9900CPA Manual

15 Juni 2025

Levenhuk LabZZ SP20 Manual

15 Juni 2025

Planet Audio P62CP Manual

15 Juni 2025

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025

Stamos SWG-WC-3D Manual

15 Juni 2025

Planet Audio P350MB Manual

15 Juni 2025