Kramer WP-3H2 Manual


Læs gratis den danske manual til Kramer WP-3H2 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Kramer WP-3H2, eller vil du spørge andre brugere om produktet?

Side 1/1
WP-3H2Panel Set Quick Start
P/N:
2900- 301250QS
Rev:
1
Scan for full manual
WP- Panel Set Quick Start Guide 3H2
This guide helps you install and use your WP-3H2 Panel Set for the first time.
Step 1: Check what’s in the box
1 UK frame
1 Quick start guide
Step 2: Install the -3H2 Panel Set WP
After mounting the device (see ) attach the frame to the
www.kramerav.com/downloads/WP-3H2 EU PANEL SET
device and then click in the faceplate as follows :
To install the US Version:
1. Attach the faceplate to the device bracket.
2. Separate the outer frame from the inner frame.
3. Screw the inner frame onto the device using the 2 inner
frame screws.
4. Snap the outer frame onto the mounted inner frame
To install European Version:
1. Attach the frame to the device bracket.
2. Snap the faceplate into the frame.
We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or their equivalent):
: 1 Gang US electrical junction boxes.US-D
: 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can t in both the device and the EU
connected cables (DIN 49073).
: 1 Gang in-wall junction box, 75x75mm (W, H), and depth that can t in both the device and the connected cables UK
(BS 4662).


Produkt Specifikationer

Mærke: Kramer
Kategori: Ikke kategoriseret
Model: WP-3H2

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer WP-3H2 stil et spørgsmål nedenfor, og andre brugere vil svare dig