Kurth Electronic KE8001 Manual

Kurth Electronic Måling KE8001

Læs gratis den danske manual til Kurth Electronic KE8001 (8 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Kurth Electronic KE8001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

KE8000

Optical power meter

Version 1.3

All reprints and electronic copies, including excerpts, require prior written approval

of Kurth Electronic GmbH.

All of the brand names and trademarks cited herein are the property of their registered owners.

Operating Manual

Kurth Electronic GmbH | Muehleweg 11 | D 72800 Eningen u.A. GERMANY |

Tel. +49(0)7121 9755 0 | Fax +49(0)7121 9755 56 |

info@kurthelectronic.de | www.kurthelectronic.de

KE8000

www.kurthelectronic.de

Optical Power Meter

dBm

OFF

REF

dbm

Warning

The laser could injure your eyes, never look directly at the laser out-

put or the connected optical bre. Do not install bres while the light

source is active and make sure that your eyes are protected at all

times.

Preparation

Insert two AA alkaline batteries into the battery compartment on the back of

the device. To do this, remove the drop protection.

Dust cover

Level meter detector port:

SC/PC, FC/PC, ST/PC interchangeable

and 2.5 mm universal ferrule

Hole for carrying strap

Removable drop protection

Battery indicator

Wavelength display

Power / Attenuation display

$"

Service port (without function)

"!$

Reference level setting

Wavelength selection key

! #

Backlight

Back side:

Battery compartment – before changing

the battery (2 x AA Alkaline), remove the

rubber drop protection

Produkt Specifikationer

Mærke:	Kurth Electronic
Kategori:	Måling
Model:	KE8001
Produktfarve:	Grey, Blue
Skærmtype:	LCD
Pakkevægt:	700 g
Pakkebredde:	340 mm
Pakkehøjde:	80 mm
Pakkelængde:	270 mm
Kabeltype:	SC/PC, FC/PC, ST/PC