Kurzweil SP1 Manual

Kurzweil Tastatur SP1

Læs gratis den danske manual til Kurzweil SP1 (22 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Kurzweil SP1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

Part Number 910585-003

Rev. C

It’s the

sound

The lightning flash with the arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

NO USER SERVICEABLE PARTS INSIDE.

DO NOT REMOVE THE COVER.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS

INSTRUCTIONS PERTAINING TO THE RISK OF FIRE ELECTRIC SHOCK , OR INJURY TO PERSONS

WARNING: When using electric products, basic precautions should

always be followed, including the following:

1. Read all the Safety and Installation Instructions and Explanation

of Graphic Symbols before using the product.

2. This product must be grounded. If it should malfunction or

break down, grounding provides a path of least resistance for

electric current to reduce the risk of electric shock. This product

is equipped with a power supply cord having an equipment-

grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet which is properly installed and

grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding

conductor can result in a risk of electric shock. Do not modify the

plug provided with the product – if it will not t the outlet, have a

proper outlet installed by a qualied electrician. Do not use an

adaptor which defeats the function of the equipment-grounding

conductor. If you are in doubt as to whether the product is properly

grounded, check with a qualied serviceman or electrician.

3. Do not use this product near water – for example, near a bathtub,

washbowl, kitchen sink, in a wet basement, or near a swimming

pool, or the like.

4. This product should only be used with a stand or cart that is

recommended by the manufacturer.

5. This product, either alone or in combination with an amplier and

speakers or headphones, may be capable of producing sound

levels that could cause permanent hearing loss. Do not operate

for a long period of time at a high volume level or a level that is

uncomfortable. If you experience any hearing loss or ringing in

the ears, you should consult an audiologist.

6. This product should be located so that its location or position

does not interfere with its proper ventilation.

7. The product should be located away from heat sources such as

radiators, heat registers, or other products that produce heat.

8. The product should be connected to a power supply only of the

type described in the operating instructions or as marked on the

product.

9. This product may be equipped with a polarized line plug (one

blade wider than the other). This is a safety feature. If you are

unable to insert the plug into the outlet, contact an electrician to

replace your obsolete outlet. Do not defeat the safety purpose of

the plug.

10. The power supply cord of the product should be unplugged

from the outlet when left unused for a long period of time. When

unplugging the power supply cord, do not pull on the cord, but

grasp it by the plug.

11. Care should be taken so that objects do not fall and liquids are

not spilled into the enclosure through openings.

12. The product should be serviced by qualied service personnel

when:

A. The power supply, power cord or plug have been damaged;

B. Objects have fallen, or liquid has been spilled into the

product;

C. The product has been exposed to rain;

D. The product does not appear to be operating normally or

exhibits a marked change in performance;

E. The product has been dropped, or the enclosure damaged.

13. Do not attempt to service the product beyond that described in

the user maintenance instructions. All other servicing should be

referred to qualied service personnel.

14. WARNING: Do not place objects on the product’s power supply

cord, or place the product in a position where anyone could trip

over, walk on, or roll anything over cords of any type. Do not

allow the product to rest on or be installed over cords of any type.

Improper installations of this type create the possibility of a re

hazard and/or personal injury.

RADIO AND TELEVISION INTERFERENCE

WARNING: Changes or modications to the instrument not expressly

approved by Young Chang could void your authority to operate the

instrument.

IMPORTANT: When connecting this product to accessories and/or

other equipment use only high quality shielded cables.

NOTE: This instrument has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This instrument

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this instrument does cause harmful interference to radio or television

reception, which can be determined by turning the instrument off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the instrument and the receiver.

• Connect the instrument into an outlet on a circuit other than the

one to which the receiver is connected.

• If necessary consult your dealer or an experienced radio/television

technician for additional suggestions.

The normal function of the product may be disturbed by strong

electromagnetic interference. If so, simply reset the product to resume

normal operation by following the instructions in the manual. If normal

function does not resume, please use the product in another location.

NOTICE

This apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

AVIS

Le present appareil numerique n’emet pas de bruits radioelectriques

depassant les limites applicables aux appareils numeriques de la

class B prescrites dans le Reglement sur le brouillage radioelectrique

edicte par le ministere des Communications du Canada.

SAVE THESE INSTRUCTIONS

Produkt Specifikationer

Mærke:	Kurzweil
Kategori:	Tastatur
Model:	SP1

Har du brug for hjælp?

Hvis du har brug for hjælp til Kurzweil SP1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tastatur Kurzweil Manualer

Kurzweil Artis 7 Manual

14 September 2025

Kurzweil Forte 7 Manual

3 Marts 2025

Kurzweil SP1 Manual

4 September 2024

Kurzweil SP4S-8 Manual

21 August 2024

Kurzweil PC3LE7 Manual

21 August 2024

Kurzweil K2700 Manual

20 August 2024

Kurzweil PC3 Manual

20 August 2024

Kurzweil PC3A8 Manual

20 August 2024

Kurzweil K2600 Manual

20 August 2024

Kurzweil K2600R Manual

20 August 2024

Tastatur Manualer

Nyeste Tastatur Manualer

Ibm ThinkPad UltraNav Manual

14 September 2025

AMX Metreau MET-13X Manual

14 September 2025

Kawai Z1000 Manual

14 September 2025

Kawai CP185 Manual

13 September 2025

Kawai MR380C Manual

13 September 2025

Ibm Fingerprint USB, US Manual

13 September 2025

13 September 2025

13 September 2025

13 September 2025

13 September 2025