Kyoritsu KEW 1012 Manual

Kyoritsu Multimeter KEW 1012

Læs gratis den danske manual til Kyoritsu KEW 1012 (12 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Kyoritsu KEW 1012, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

KEW 1012

オートレンジ　デジタル　マルチメータ・AUTO RANGE DIGITAL MULTIMETER

取扱説明書

INSTRUCTION MANUAL

KYORITSU L S ELECTRICA INSTRUMENT

WORKS,LTD.,

— 12 —

　1. Safety Warnings

This instrument has been designed, manufactured and tested according to the following standards.

　　　IEC 61010-1, IEC61010-2-033 Measurement CAT 300V Pollution degree 2Ⅲ

　　　IEC 61010-031

　　　IEC 61326-1, 61326-2-2 (EMC)

This instruction manual contains warnings and safety rules which must be observed by the user to ensure safe operation of the instrument and retain it in safe

condition. Therefore, read through these operating instructions before using the instrument.

WARNING

● Read through and understand instructions contained in this manual before starting using the instrument.

● Save and keep the manual handy to enable quick reference whenever necessary.

● This instrument should only be used by suitably trained person and be sure to follow measurement procedures described in the manual. Kyoritsu assumes no

responsibility for damage and injury caused by misuse or not following instructions in the manual.

● Be sure to understand and follow all safety instructions contained in the manual.

Be sure to observe the above instructions.

Failure to follow the above instructions may cause injury, instrument damage and/or damage to equipment under test.

Kyoritsu is by no means liable for any damage resulting from the instrument in contradiction to this cautionary note.

The symbol indicated on the instrument means that the user must refer to related parts in the manual for safe operation of the instrument.

Be sure to carefully read the instructions following each symbol in the manual.

DANGER is reserved for conditions and actions that are likely to cause serious or fatal injury.

WARNING is reserved for conditions and actions that can cause serious or fatal injury.

CAUTION is reserved for conditions and actions that can cause injury or instrument damage.

DANGER

● Never make measurement on the circuit in which electrical potential to ground over 300V AC/DC exists.

●

Do not attempt to make measurement in the presence of flammable gasses. Otherwise, the use of the instrument may cause sparking, which can lead to an explosion.

● Be sure to keep your fingers behind the Protective figerguard part of test lead.

● Never attempt to use the instrument if its surface or your hand is wet.

● Do not open the battery cover and the instrument case when making measurement.

● Do not exceed the maximum allowable input of any measurement range.

● The instrument should be used only in its intended applications or conditions. Otherwise, safety functions equipped with the　instrument do not work, and

instrument damage or serious personal injury may be caused.