La Crosse Technology WS-7159U Manual

La Crosse Technology Vejrstation WS-7159U

Læs gratis den danske manual til La Crosse Technology WS-7159U (19 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-7159U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

WS-7159U

Wireless 433 MHz

Radio-controlled Weather Station

Instruction Manual

Contents

Language Page

English 2

French 24

Spanish 46

FCC ID : OMO-01RX (Receiver), OMO-01TX (transmitter)

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED,

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

GB P.4 GB

P.5

GB P.2 GB

P.3

Topic Page

Inventory of Contents/Additional Equipment 3

About WWVB 4

Quick Set-Up Guide 4

Detailed Set-Up Guide

Battery installation 5

Program Mode

Program Sequence and Default Settings 6

Function Keys 7

Setting the LCD Contrast 7

Setting the Time Zone 7

Daylight Saving Time Setting 8

Radio-controlled Time Setting 8

12/24-hour Time Setting 9

Setting the Time 9

Setting the Year, Day and Month 10

Setting the Snooze 10

Setting the Temperature Format 11

Setting the Forecast Sensitivity 11

Features

Weather Forecast Icons and Tendency Arrows 12

Indoor Temperature, Humidity, & Comfort Level Indicator 13

Outdoor Temperatures 14

Minimum & Maximum Records (Indoor, Outdoor, & Resetting) 14

Additional Remote Control Sending Units (Set-Up, Viewing & Operation)

Mounting 16

Troubleshooting 18

Maintenance & Care 19

Specifications 20

Warranty Information 21

TABLE OF CONTENTS INVENTORY OF CONTENTS

1. The indoor weather station (Figure 1).

2. One remote temperature sensor with mounting bracket

(Figure 2).

3. Three each, 1/2" Philips screws.

4. One strip double-sided adhesive tape.

5. Instruction manual and warranty card.

ADDITIONAL EQUIPMENT (not included)

1. Three fresh AA 1.5V batteries for the indoor weather station.

2. Two fresh AA 1.5V batteries for the remote temperature sensor.

3. One, Philips screwdriver for mounting.

ABOUT WWVB (Radio Controlled Time)

The NIST (National Institute of Standards and Technology-Time and

Frequency Division) WWVB radio station is located in Ft. Collins, Colorado,

and transmits the exact time and date signal continuously throughout the

United States at 60 kHz. The signal can be received up to 2,000 miles away

through the internal antenna in the Weather Station. However, due to the

nature of the Earth’s Ionosphere, reception is very limited during daylight

hours. The weather station will search for a signal every night when reception

is best. The WWVB radio station derives its signal from the NIST Atomic

clock in Boulder, Colorado. A team of atomic physicists is continually

measuring every second, of every day, to an accuracy of ten billionths of a

second per day. These physicists have created an international standard,

measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in

a vacuum. For more information on the atomic clock and WWVB please

see the NIST website at http://www.boulder.nist.gov/timefreq/stations/wwvb.

htm.

QUICK SET-UP GUIDE

Hint :

Use good quality Alkaline Batteries and avoid rechargeable batteries.

1. Have the indoor weather station and remote temperature sensor 3 to 5

feet apart.

2. Batteries should be out of both units for 10 minutes.

3. Place the batteries into the remote temperature sensor first then into

the indoor weather station.

(All outdoor remotes must be started before the indoor station)

4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the indoor weather station and remote temperature sensor will

start to talk to each other and the display will show the indoor temperature,

humidity and an outdoor temperature. If the indoor weather station does

not display all information after the 15 minutes please retry the set up as

stated above. After all information has been displayed for 15 minutes you

can place your sensor outdoors and set your time.

The remote temperature sensor should be placed in a dry, shaded area.

The remote temperature sensor has a range of 330 feet. Any walls that the

signal will have to pass through will reduce distance. An outdoor wall or

window can have up to 30 feet of resistance and an interior wall can have

Time LCD

Date LCD

Forecast LCD

Indoor LCD

Outdoor LCD

Figure 1

Figure 2

TX6U remote

temperature

sensor

Mounting

Bracket

up to 20 feet of resistance. Your distance plus resistance should not exceed

330 ft. in a straight line.

Note :

Fog and mist will not harm your remote temperature sensor but

direct rain must be avoided.

Note :

The remote temperature sensor transmits a signal every minute.

After the batteries have been installed, the indoor weather station will search

for the signal for a duration of 15 minutes. If there is no temperature reading

in the OUTDOOR LCD after 15 minutes, make sure the units are within

range of each other, or repeat the battery installation procedure. If a button

is pressed before the indoor weather station receives the temperature signal,

you will need to follow the battery installation procedure again.

To complete the set up of your wireless weather station after the 15 minutes

have passed please follow the steps that follow in the Detailed Set-Up Guide.

DETAILED SET-UP GUIDE

I. BATTERY INSTALLATION

A. REMOTE TEMPERATURE SENSOR

1. Remove the mounting bracket. The bracket snaps

on and o easily.

2. Remove the battery cover, by sliding the cover down.

3. Observing the correct polarity install 2 AA batteries.

The batteries will t tightly (to avoid

start-up problems make sure they do not spring free).

4. Replace the battery cover by sliding upwards. Be

sure battery cover is on securely.

B. INDOOR WEATHER STATION

1. Remove the battery cover. To do this, insert a

solid object in the space provided at the lower-

central position of the battery cover, then push

up and pull out on the battery cover.

2. Observe the correct polarity, and install 3 AA

batteries.

3. Replace the battery cover.

Battery

Cover

Battery

Cover

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Vejrstation
Model:	WS-7159U

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology WS-7159U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation La Crosse Technology Manualer

La Crosse Technology M73170 Manual

21 August 2025

La Crosse Technology TX145WSDR Manual

31 Juli 2025

La Crosse Technology 328-1415 Manual

31 Juli 2025

La Crosse Technology 308-1711BLV3 Manual

31 Juli 2025

La Crosse Technology 308-10847 Manual

21 Juli 2025

La Crosse Technology CA73071 Manual

4 Marts 2025

La Crosse Technology M71633 Manual

8 Januar 2025

La Crosse Technology V41CA Manual

8 Januar 2025

La Crosse Technology CA74177 Manual

26 December 2024

La Crosse Technology S73071 Manual

26 December 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Brandson 305419 Manual

15 September 2025

Brandson 306643 Manual

15 September 2025

Brandson 304632 Manual

15 September 2025

Brandson 304577 Manual

14 September 2025

Brandson 304465 Manual

14 September 2025

Brandson 305420 Manual

14 September 2025

Aldi GT-WS-06s Manual

14 September 2025

Dexford WSRC 2254 Manual

13 September 2025

Waldbeck Huygens Manual

9 September 2025

Discovery Report WA20-S Manual

9 September 2025