La Crosse Technology WS-9032U Manual

La Crosse Technology Vejrstation WS-9032U

Læs gratis den danske manual til La Crosse Technology WS-9032U (19 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 14 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-9032U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

WS-9032U

Wireless 433 MHz

Weather Station

Instruction Manual

Contents

Language Page

English 2

French 23

Spanish 46

FCC ID: OMO-01RX (Receiver), OMO-01TX (transmitter)

FCC DISCLAIMER

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that

may cause undesired operation.

TABLE OF CONTENTS

Topic Page

Inventory of Contents/ Additional Equipment 3

About WWVB 3

Quick Set Up Guide 4

Detailed Set Up Guide

Battery Installation 4

Start Up Sequence 6

Explanation of LCD Information 7

Function Key Layout 8

Program Mode

Overview of Programming Sequence 8

LCD Contrast Setting 8

Time Zone Setting 8

DST ON/OFF Setting 9

Radio-controlled Time ON/OFF Setting 9

12/24-hour Time Mode Setting 9

Setting the Time/Date Manually 9

Temperature Measuring Units (˚F/˚C) 11

Air Pressure Measuring Units (inHg/hPa) 11

Relative Pressure Setting 11

Forecast Sensitivity Setting 11

Features and Operation

Time Alarm Setting and Operation 12

Moon Phase 13

Minimum/Maximum Temperature/Humidity 13

Multiple Remote Temperature/Humidity Sensors 14

Comfort Icon 15

Weather Forecast and Pressure Trend Indicators 15

Weather Icons 15

Weather Tendency Arrows 16

Barometric Air Pressure Reading 16

Air Pressure History Bar Chart 16

Mounting 17

Maintenance and Care 18

Troubleshooting Guide 19

Specifications 20

Warranty Information 20

INVENTORY OF CONTENTS

1. WS-9032U-indoor weather station

2. TX4U-remote thermo/hygro (temperature/humidity) sensor

3. Instruction manual and warranty card

ADDITIONAL EQUIPMENT (not included)

1. Five fresh AA 1.5V alkaline batteries.

2. One wall-mounting screw (optional)

ABOUT WWVB (radio-controlled time)

The NIST (National Institute of Standards and Technology-Time and Frequency

Division) radio station, WWVB, is located in Ft. Collins, Colorado and transmits the

exact time signal continuously throughout the United States at 60 kHz. The signal

can be received up to 2,000 miles away through the internal antenna in the indoor

weather station. However, due to the nature of the Earth’s Ionosphere, reception is

very limited during daylight hours. The indoor weather station will search for a signal

every night when reception is best. The WWVB radio station derives its signal from

the NIST Atomic clock in Boulder, Colorado. A team of atomic physicists continually

measure every second of every day to an accuracy of ten billionths of a second a

day. These physicists have created an international standard, measuring a second

as 9,192,631,770 vibrations of a Cesium 133 atom in a vacuum. For more informa-

REMOTE

THERMO-SEN SO R

433 MHz

tion about WWVB please see the NIST website at http://www.boulder.nist.gov/

timefreq/stations/wwvb.htm

QUICK SET-UP GUIDE

Hint:

Use good quality Alkaline Batteries and avoid rechargeable batteries.

1. Have the indoor weather station and remote thermo/hygro sensor 3 to 5 apart.

2. Batteries should be out of both units for 15 minutes.

3. Place the batteries into the remote thermo/hygro sensor first then into the in-

door weather station.

(All remote thermo/hygro sensors must be started before the indoor weather

station)

4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the indoor weather station and remote thermo/hygro sensor will start to

talk to each other and the indoor weather station will show both the indoor tempera-

ture and humidity and the outdoor temperature and humidity. If the indoor weather

station does not display all values after the 15 minutes please retry the set up as

stated above. After all values are displayed for 15 minutes you can place your re-

mote thermo/hygro sensor outdoors and set your time.

The remote thermo/hygro sensor should be placed in a dry, shaded area. The re-

mote thermo/hygro sensor has a range of 330 feet. Any walls that the signal will

have to pass through will reduce distance. An outdoor wall or window will have 20 to

30 feet of resistance and an interior wall will have 10 to 20 feet of resistance. Your

distance plus resistance should not exceed 330 ft. in a straight line.

NOTE:

Fog and mist will not harm your remote thermo/hygro sensor but direct rain

must be avoided.

To complete the set up of your indoor weather station after the 15 minutes have

passed please follow the steps in the Detailed Set Up Guide.

Note:

The remote thermo/hygro sensor transmits a signal every 3 minutes; after the

batteries have been installed, the indoor weather station will search for the signal for

a duration of 5 minutes. If there is no temperature reading in the OUTDOOR LCD

after 5 minutes, make sure the units are within range of each other, or repeat the

battery installation procedure.

DETAILED SET-UP GUIDE

I. Battery Installation

Batteries will fit tightly. To avoid start-up problems, make sure that the batteries do

not spring free. Also be sure to insert alkaline batteries into the remote thermo/hygro

sensor first, then the indoor weather station. Initial set up should be done with the

remote thermo/hygro sensor and indoor weather station in the same room. The units

should be permanently mounted only after the signal reception has been verified.

A. Remote Temperature and Humidity Sensor

1. Pull the cylindrical rain cover off the transmitter.

2. Remove the battery cover (located on the backside of the transmitter, above the

mounting post and bracket). Press the arrow and slide the battery cover off.

3. Observing the correct polarity install 2 Alkaline AA batteries.

4. Replace battery cover, and place rain cover snugly onto the transmitter.

B. Indoor Weather Station

1. Remove the battery cover (the cover has white writing on it).

2. Observe the correct polarity, and install three Alkaline AA batteries.

SIZ E AA LR6

GB P.2 GB

P.3

GB P.4 GB

P.5

Battery Cover

REMOTE

THERMO-SENSOR

433 MHz

SIZE AA LR6

+SIZE AA LR6

Rain Cover

Mounting

Bracket / Recent

Thermo-Hygro

Transmitter

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Vejrstation
Model:	WS-9032U

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology WS-9032U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation La Crosse Technology Manualer

La Crosse Technology TX145WSDR Manual

31 Juli 2025

La Crosse Technology 328-1415 Manual

31 Juli 2025

La Crosse Technology 308-1711BLV3 Manual

31 Juli 2025

La Crosse Technology 308-10847 Manual

21 Juli 2025

La Crosse Technology CA73071 Manual

4 Marts 2025

La Crosse Technology M71633 Manual

8 Januar 2025

La Crosse Technology V41CA Manual

8 Januar 2025

La Crosse Technology CA74177 Manual

26 December 2024

La Crosse Technology S73071 Manual

26 December 2024

La Crosse Technology 308-1415FCT-NH Manual

26 December 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Hyundai WS 2303 Manual

10 August 2025

TFA 30.3039 Manual

8 August 2025

TFA Linea Plus 35.1144.01 Manual

7 August 2025

TFA 98.1111.02 Manual

7 August 2025

TFA 30.3900.02 Manual

7 August 2025

TFA View 35.1142 Manual

7 August 2025

Brandson 307346 Manual

5 August 2025

Techno Line WS 9130 Manual

3 August 2025

Theben LUXORliving M140 Manual

3 August 2025

Techno Line WS 9215 Manual

3 August 2025