E N G L I S H
Introduction
Thank you for choosing the pulse oxime-
ter by LANAFORM.
The Pulse Oximeter is a non-invasive
method used to measure blood oxygen
saturation (SpO2) by checking the percent-
age of oxygen-saturated haemoglobin and
measuring pulse rate. This process has
been in regular use now for twenty years
and is proving to be an essential control in
medical practice for maintaining oxygen
levels and preventing respiratory prob-
lems. The value of the oxygen saturation
may be regarded as dangerous if it is be-
low 90% for arterial blood. Normal value is
100% under normal atmospheric conditions.
Please read all the instructions before
using your product, particularly these
basic safety instructions.
The photographs and other images
of the product in this manual and on the
packaging are as accurate as possible,
but do not claim to be a perfect repro-
duction of the product.
Contents
01 Unpacking
02 Contents of the package
03 Symbols
04 Safety precautions
05 Product description
06 Product structure
07 Description of the screen
08 Settings
09 Instructions for use
10 About the display
11 Reading the measurements
12 Replacing the batteries
13 Fixing the strap
14 Cleaning and disinfecting routine
15 Maintenance
16 Technical specications
17 Safety category
18 Storage and transport
19 Manufacturer’s guidelines
and statement - Electromag-
netic emissions
20 Warranty
21 Waste disposal
22 After-sales service
1. Unpacking
Please open the packaging carefully be-
fore use. Check whether all the accessories
are present and whether any components
have been damaged during transport and
follow the installation and operating in-
structions in this manual. In the event of
any damage or malfunction, please con-
tact the reseller or Lanaform directly. In
the event of any complaint, you will need
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2
E-IM-PO110-002.indd 2E-IM-PO110-002.indd 2 06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:00
06-03-23 14:53:0006-03-23 14:53:00
