Lanzar OPTIX5 Manual


Læs gratis den danske manual til Lanzar OPTIX5 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Lanzar OPTIX5, eller vil du spørge andre brugere om produktet?

Side 1/8
- 1 -
FRONT AND REAR CHANNEL : SUBWOOFER CHANNEL:
* High Pass Frequency Selector * Subwoofer Input Switch
40Hz to 400Hz / 32Hz to 250Hz * +12dB Bass Boost
* Frequencies Multiplier p2-x1 or x20 * Phase Shift Switch
* Crossover Slope 6dB/Octave or * Stereo/Mono Switch
12dB/Octave * Output Level Control
* Signal Gain Control * Exclusive Remote Subwoofer Level Control
* Parallel Input Switch * Low Pass Frequency Selector 40Hz to 400Hz
* Bass Boost Frequency Selector 25Hz to 250Hz
Power Supply....................................... DC to DC switching power
S/N Ratio............................................. 110dB
Channel Separation.............................. 80dB
Distortion.............................................. THD @ 0.01%
Crossover Slope.................................... 12dB per Octave
Input Impedance................................... 20K Ohms
Output Impedance................................ 100 Ohms
Output Gain.......................................... 1:2 (+6dB)
Output Voltage Level........................... 8Volts Max
Dimensions.......................................... 5-13/16" (W) x 8-1/4" (L) x 1-3/8" (H)
1. Find a suitable location in the vehicle to mount the crossover.
2. Bolt the crossover to the mounting surface.
3. Using the screw terminals provided, connect minimum 16 gauge wire from the power,
Ground and remote terminals. Connect the shortest possible wire to a chassis ground point. The (+)
12V connection should be made directly to the car battery, and the remote should be connected to
the Remote Turn On Lead of your head unit. When connecting directly to the battery, install a 3A
Fuse within 18 inches of the battery terminal.
4. Connect all line inputs and outputs using high-quality RCA cables.
5. Recheck all connections before powering up.
6. Set all level controls to their minimum positions and set all crossover controls, switches, etc. To
the desired frequency or position.
7. Once the system is powered up, set the volume control on the head unit to a moderate level where
your normal speaking voice can be heard while the music is playing.
8. Further fine tuning of the various controls may be necessary to obtain the desired results.
9. When unsure about installation or system tuning, please consult an authorized dealer.LANZAR
INSTALLATION
FEATURES
SPECIFICATIONS
Features and specifications subject to change without notice.
Congratulations on your purchase of a Crossover. This product has been designed LANZAR
and built to deliver excellent sound quality and long lasting high performance. We are sure you
will enjoy listening to your favorite music with this component in your car audio System. LANZAR
For best result a professional car stereo installer for application advice or troubleshooting. Thank
you for choosing products for your auto-sound system. Everything else is just noise LANZAR
INTRODUCTION


Produkt Specifikationer

Mærke: Lanzar
Kategori: Ikke kategoriseret
Model: OPTIX5

Har du brug for hjælp?

Hvis du har brug for hjælp til Lanzar OPTIX5 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Lanzar Manualer

Lanzar

Lanzar VCAP1200 Manual

17 August 2024
Lanzar

Lanzar VCAP8000 Manual

15 August 2024
Lanzar

Lanzar VCAP3000 Manual

14 August 2024
Lanzar

Lanzar VCAP5000 Manual

13 August 2024
Lanzar

Lanzar OPTICAP300 Manual

12 August 2024
Lanzar

Lanzar OPTIX5 Manual

11 August 2024
Lanzar

Lanzar OptiX-6 Manual

10 August 2024
Lanzar

Lanzar VCAP10000 Manual

10 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer