Lapp ÖLFLEX ROBOT 900 DP Manual

Lapp Kabler til computere og periferiudstyr ÖLFLEX ROBOT 900 DP

Læs gratis den danske manual til Lapp ÖLFLEX ROBOT 900 DP (1 sider) i kategorien Kabler til computere og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Lapp ÖLFLEX ROBOT 900 DP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

0028100

DATA SHEET

valid from:

01.01.2019

Creator: HESC / PDC

Released: ALTE / PDC

Document: 0028100 DB EN

Version: 05

Page 1 1 of

We reserve all rights according to DIN ISO 16016.

PD 0019/05_04.18EN

Application

orsion and bending stresses. They can be used for the transmission of control and monitoring

signals or as supply cables. They are also suitable for use in dry, damp or wet areas. They are suitable for outdoor use if the indicated

temperature range is observed.

The outer sheath withstands high mechanical stresses, in particular abrasion and dragging. It is also cut proof and resists microbes and

hydrolysis.

They are suitable for linear, automated movements, as well as torsional applications in robots and automated handling machines. The

maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted.

Application range:

Inside of dresspacks of buckling arm robots and for use for gantry robots, industrial machinery and machine tools, automated handling

equipment, automotive industry, in power chains or moving machine parts

Design

based on

EN 50525-2-21 resp. VDE 0285-525-2- 21

Conductor

superfine wire strands of bare copper wires

Insulation

TPE (Thermoplastic Elastomer)

Core identification code

with up to 0.34 mm²: acc. to DIN 47100

more than 0.5 mm²: acc. to. VDE 0293-1, with or without GN/YE protective conductor

black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293- 334

Cores from screened pair (2x1): no. 1 and 2

Stranding

cores are stranded in layers

Taping

PTFE foil wrapping

Screen

Wrapping of tinned copper wires

Outer sheath

Polyurethane compound TMPU in acc. to EN 50363- -2 resp. VDE 0207- - -2, flame retardant 10 363 10

colour: black, similar RAL 9005

dlsafjlöj f

Electrical properties at 20°C

Rated voltage

with up to 0.34 mm²: 48 V AC

peak working voltage: 350 V (not for power applications)

more than 0.5 mm²: U₀/ U: 300 / 500 V

Test voltage

with up to 0.34 mm²: 1500 V AC

more than 0.5 mm²: 3000 V AC

Mechanical and thermal properties

Minimum bending radius

flexing: 15 x cable diameter

fixed installation: 4 x cable diameter

Temperature range

flexing: - 40˚C up to +80˚C max. conductor temp.

fixed installation: - 50˚C up to +80˚C max. conductor temp.

Torsional stress

max. torsion angle: ± 180˚/m

Flammability

flame retardant acc. to IEC 60332-1-2 resp. VDE 0482- -1-2 332

Oil resistance

acc. to EN 50363- -2 resp. VDE 0207- - -2 10 363 10

Tests

acc. to IEC 60811, EN 50395, EN 50396

General requirements

with up to 0.34 mm²: These cables are conform to the EU-Directive 2011/65/EU (RoHS,

Restriction of the use of certain hazardous substances).

more than 0.5 mm²: These cables are conform to the EU-Directive 2014/35/EU (Low Voltage

Directive)

Produkt Specifikationer

Mærke:	Lapp
Kategori:	Kabler til computere og periferiudstyr
Model:	ÖLFLEX ROBOT 900 DP
Produktfarve:	Sort
Driftstemperatur (T-T):	-50 - 80 °C
Certificering:	CE, EAC
Kabellængde:	10 m
Diameter:	5.7 mm
Indgangsspænding:	48 V
Stik 1 køn:	Ingen
Stik 2 køn:	Ingen
Materiale for kapper:	Polyurethan (PUR)
Ledningsstørrelse:	0.34 mm²
Ledningsmateriale:	Kobber
Antal kabelkerner:	4