Rev. C 8/09 2 2543ES Rev. C 8/09 7 2543ES
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, elec-
trical shock and injury to persons, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using this Fan.
1. Make certain the power source conforms to the electrical requirements of the Fan.
2. Make certain that the room is equipped with a working smoke detector.
3. Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING
THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE LEAVING THE AREA. NEVER
LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.
6. This Fan must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmo-
spheres where gasoline, paint or flammable liquids are used or stored.
7. DO NOT use Fan in or near a window. Rain may create an electrical hazard.
8. Completely assemble Fan, according to instructions, before connecting to power supply.
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully insert. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if the attach-
ment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT remove, replace, repair or
tamper with the originally supplied plug. If the Fan does not function properly, it may be due to the safety device incor-
porated in this plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m. Eastern. If the plug warning
label is missing or damaged, call the toll free number for a replacement label. Base de Soporte
B
Base de
Soporte A
Copas
Figura 1
Figura 3
(4) #8 X 1/2" Screws
Conjunto de la
Base de Soporte
Figura 4
Botón
Temporizador
Botón
Alimentación
Botón Velocidad
Baterías
AAA
Oscilación
Botón
Cable Eléctrico
Botón
Apagado Automático
HERRAMIENTAS NECESARIAS PARA EL ARMADO (no incluida)
- Destornillador de Cabeza Phillips # 2
ARMADO
1. Para facilitar el armado, recueste el Ventilador de modo que la
parrilla negra y el tablero de control den hacia arriba.
2. Arme las Mitades de la Base de Apoyo encastrando las Puntas de
la Base de Apoyo A con los Orificios para Puntas en la Base de
Apoyo B. Conecte el Cable Eléctrico a través del orificio grande
en el centro de la Montura de la Base de Apoyo. (Figura 1)
3. Asegure (3) M5 X 5/8" Tornillos en los tres orificios externos en la
parte inferior de la Base. (Figura 2)
4. Coloque los (4) tornillos #8 de 1,3 cm en los cuatro orificios en la
parte inferior de la base. (Figura 3)
CONTROL REMOTO
1. Instale la baterías suministró como mostrado en la
Figura 4. La batería es el tipo “AAA”.
2. No mezcle baterías viejas y nuevas. No mezcle bat-
erías alcalinas, estándar (carbono-cinc) o recargables
(níquel-cadmio).
3. No se deshága de baterías en el fuego baterías pueden
estallar o pueden salirse.
FUNCIONAMIENTO
Este Ventilador puede hacerse funcionar mediante los
Controles Manuales ubicados en la parte superior de la
unidad o con el Control Remoto (se muestra en la Figura 4).
1. Coloque el ventilador sobre una superficie firme y nivelada.
2. Conecte el cable eléctrico a un tomacorriente de 120 voltios.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
Cuando los en chu fes que dan flojo s en los
tomacorrientes, pueden deslizarse parcial o
completamente fuera del tomacorriente con un leve
movimiento del cable adosado. Los tomacorrientes
en este estado podrían sobrecalentarse y representar
un grave peligro de incendio; si está cubierto por
una cortina o tela, el riesgo de incendio es aún
mayor.
3. Conecte la energía eléctrica a su ventilador pulsando el Botón
Alimentación ( ).
4. VELOCIDAD DEL VENTILADOR: Ahora puede ajustar la ve-
locidad del ventilador al nivel deseado - 1 (baja), 2 (mediana)
ó 3 (alta) - pulsando el Botón Velocidad ( ).
5. OSCILACIÓN: Oprima el Botón de Oscilación ( ) para activar
y desactivar la función de oscilación.
6. FUNCIÓN DE TEMPORIZADOR: Este ventilador está equi-
pado con un temporizador. El temporizador puede ser pro-
gramado 1 hora a 7 horas. Continúe oprimiendo el Botón
Temporizador ( ) para lograr el tiempo de programación
deseado. Para cancelar el temporizador, presione el botón
del temporizador hasta que se apague la luz.
7. APAGADO AUTOMÁTICO: El modo de apagado au-
tomático se activará a velocidad media durante 6 horas
y luego se apagará.
8. Para apagar el Ventilador, presione el Botón de Encendido
( ) y desenchufe la unidad del tomacorrientes.
9. Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must use an
extension cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed. NEVER
use a single extension cord to operate more than one Fan. Do not plug Fan into any other cord connected device, such as
a power strip, cord reel, surge protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices may
create a fire hazard.
10. operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any NEVER
manner.
11. insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock NEVER
or fire, or damage the Fan. To reduce the risk of fire, block or tamper with the Fan in any manner while itDO NOT
is in operation.
12. Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the
Power Cord so the Fan or other objects are not resting on it. run Power Cord under carpet, cover cord with throw DO NOT
rugs, runners or the like. Arrange Power Cord away from room traffic and where it will not be tripped over.
13. This Fan is not intended for use in wet or damp locations. locate a Fan where it may fall into a bathtub or other water NEVER
container. use Fan where flammable liquids are used or stored.NEVER
14. use Fan outdoors. NEVER
15. Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this
occurs, move the fan to another location.
16. Keep Fan remote unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan.
17. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equip-
ment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.The user is cautioned that changes and modications
made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.
18. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined.
Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to
electrical requirements for Agricultural Buildings. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7
(2008).
19. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable
state or local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT MEET THE
REQUIREMENTS OF NEC ARTICLE 500 (2008).
(3) M5 X 5/8" Screws
Canal Conductor de
Cable
Conjunto de la
Base de Soporte
Cable Eléctrico
Figura 2
