Lego Exo Force 7721 Manual

Lego Legetøj Exo Force 7721

Læs gratis den danske manual til Lego Exo Force 7721 (16 sider) i kategorien Legetøj. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Lego Exo Force 7721, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

English,1

Contents

Installation, 2-3-4-5

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Description of the washing machine, 6-7

Control panel

Display

Running a wash cycle, 8

Wash cycles and functions, 9

Table of wash cycles

Wash functions

Detergents and laundry, 10

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Precautions and tips, 11

General safety

Disposal

Opening the porthole door manually

Care and maintenance, 12

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Troubleshooting, 13-14

Assistance, 15-16

WMUD 963

Instructions for use

WASHING MACHINE

Downloaded from manuals search enginewww.Manualslib.com

Installation

Levelling your appliance correctly will provide it with sta-

bility and avoid any vibrations, noise and shifting during

operation. If it is placed on a fitted or loose carpet, adjust

the feet in such a way as to allow enough room for ventila-

tion beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply pipe

by screwing it to a cold

water tap using a 3/4 gas

threaded connection (see

figure).

Before performing the con-

nection, allow the water to

run freely until it is perfectly

clear.

2. Connect the other end of

the water inlet hose to the

washing machine,

screwing it onto the ap-

pliance’s cold water inlet,

situated on the top right-

hand side on the rear of the

appliance (see figure).

3. Make sure there are no kinks or bends in the hose.

! The water pressure at the tap must be within the values

indicated in the Technical details table (on the page 5).

! If the water inlet hose is not long enough, contact a spe-

cialist store or an authorised serviceman.

! Ensure that the supply taps are allowing water through.

Old taps may seize in the closed position and thus pre-

vent water reaching the machine.

! Never use second-hand or old inlet hoses; use the pro-

ducts supplied with the machine.

! Keep this instruction manual in a safe place for future refe-

rence. Should the appliance be sold, transferred or moved,

make sure the instruction manual accompanies the washing

machine to inform the new owner as to its operation and

features.

! Read these instructions carefully: they contain vital infor-

mation on installation, use and safety.

Unpacking and levelling

Unpacking

! This is a separate part of

the polystyrene base and

should be removed with

the base.

! IMPORTANT check

when unpacking your

machine.

1. Unpack the washing machine.

2. Check whether the washing machine has been dama-

ged during transport. If this is the case, do not install it and

contact your retailer.

3. Remove the 4 protective

screws and the rubber bush

with the respective spacer,

situated on the rear of the

appliance (see also the

installation leaflet).

4. Seal the gaps using the plastic plugs provided.

5. Keep all the parts: you will need them again if the wa-

shing machine needs to be moved to another location.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if

the two front feet have not been adjusted correctly.

1. Install the washing machine

on a flat sturdy floor, without

resting it up against walls,

cabinets or anything else.

2. If the floor is not perfectly level, compensate for any

unevenness by tightening or loosening the adjustable front

feet the angle of inclination, measured accor-(see figure);

ding to the worktop, must not exceed 2°.

Downloaded from manuals search enginewww.Manualslib.com

Produkt Specifikationer

Mærke:	Lego
Kategori:	Legetøj
Model:	Exo Force 7721

Har du brug for hjælp?

Hvis du har brug for hjælp til Lego Exo Force 7721 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Legetøj Lego Manualer

Lego Ninjago Dragons Rising 71808 Manual

1 August 2025

Lego Racers 8353 Manual

1 August 2025

Lego Harry Potter 4768 Manual

31 Juli 2025

Lego Technic 8041 Manual

31 Juli 2025

Lego Disney 41156 Manual

31 Juli 2025

Lego Discovery 7470 Manual

31 Juli 2025

Lego Star Wars 7146 Manual

31 Juli 2025

Lego Piranha Plant 71426 Manual

31 Juli 2025

Lego Marvel Spider-Man's Mask 76285 Manual

31 Juli 2025

Lego Technic 8237 Manual

31 Juli 2025

Legetøj Manualer

Nyeste Legetøj Manualer

Wendi Toys Krokodil Manual

30 Juli 2025

Piko 57094 Manual

29 Juli 2025

Hathaway BG3143 Manual

29 Juli 2025

Ikea FJÄLLVRÅK 405.823.55 Manual

29 Juli 2025

Ikea FJÄLLVRÅK 305.823.51 Manual

27 Juli 2025

Ikea FJÄLLVRÅK 405.972.91 Manual

27 Juli 2025

Ikea FJÄLLVRÅK 605.972.85 Manual

27 Juli 2025

Kogan NBMG136BLKA Manual

25 Juli 2025

Kogan NBMG158BLKA Manual

24 Juli 2025

Kogan NBMG108BLKA Manual

24 Juli 2025