INSTRUCTION / INSTALLATION SHEET
4 X 10 Punchdown Telecom Modules
IS-0360 Rev. O
301 Fulling Mill Road, Suite G
Middletown, PA 17057
Phone (800) 321-2343 / Fax (717) 702-2546
www.onqlegrand.com
©Copyright 2005 by On-Q/Legrand All Rights Reserved. Page 1 of 2
1. INTRODUCTION
The On-Q/Legrand 4 X 10 Punchdown Telecom Modules (P/N TM7553 and
TM7554 as shown in Figure 1) are members of our flexible family of Telephone
Distribution Modules, each of which is designed to more closely match
homeowner needs.
2. DESCRIPTION
The 4 X 10 Punchdown Telecom Modules distribute four incoming telephone
lines to as many as 10 locations throughout the home (see Figure 2). The P/N
TM7554 version also includes an RJ-31x security system interface. Both versions
have the following features:
• 110 punchdown style connectors for user friendly configuration
• All ports wired to meet TIA 568A specifications
• Accepts four incoming telephone lines
• Flexible distribution to 10 telephone locations
• Single bay bracket (P/N 364890-01) included for installation in On-Q style
enclosure (see Figure 2)
• 50 microns gold plated contact points on RJ-31x interface port (TM7554
only)
3. INSTALLATION
A. MOUNT THE 4 X 10 PUNCHDOWN TELECOM MODULE INTO THE ENCLOSURE
1. Pull out the plungers located at each corner of the 4 X 10 Telecom Module and insert the module into the
included single bay bracket (see Figure 2), depressing the plungers to secure the module to the bracket.
2. Insert the bracket into the On-Q style enclosure by inserting the tabs on the bracket into the slots on the left
hand side of the enclosure and securing the bracket with the push-pin on the right end of the bracket.
TM7553
TM7554
enclosure
mounting tabs
enclosure
mounting
push-pin
Lines #1- #4 in from
phone company
To telephone locations
module
mounting
plunger
Figure 2
Figure 1
