Lewitt MTP 840 DM Manual

Lewitt Mikrofon MTP 840 DM

Læs gratis den danske manual til Lewitt MTP 840 DM (1 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Lewitt MTP 840 DM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

// Overview

// Dynamic handheld microphone with Active Mode

// Supercardioid polar pattern for maximum isolation of the main sound source

// Frequency response shaped speciﬁ cally for vocal applications

// 3 gain settings: 0 dB, +6 dB, and +12 dB

// 3 low-cut settings: linear, 150 Hz (12 dB/oct), 250 Hz (12 dB/oct)

// Switchable LED status indicator for low-cut and pre-attenuation settings

// Integrated acoustic pop and windshield - washable

// Solid full-metal, die-cast body

// Gold plated & corrosion-resistant 3-pin XLR output connector

Top applications // Vocals, instrument amps, spoken word

and live interviews

// User interface

1 LED status indicator // Indicates active low-cut ﬁ lter (A)

and gain ( ) for P48 operation mode.B

A1 A2: linear : 150 Hz (12 dB/oct) A3: 250 Hz (12 dB/oct)

B1: 0 dB B2 B3: +6 dB gain : +12 dB

2 Operation mode slide switch // Adjust the slide switch to choose

between:

P48

: passive mode, do not supply phantom power, LED is off

P48: active mode, 48V phantom power required, LED is off

P48 : active mode, 48V phantom power required, LED is on

3 Gain slide switch // Choose between 0 dB, 6 dB and 12 dB gain

levels by adjusting the slide switch.

4 Low-cut ﬁ lter slide switch // Choose between linear,

150 Hz (12 dB/oct) and 250 Hz (12 dB/oct) by adjusting the slide

switch. Low-cut ﬁ lters eliminate low-frequency sounds to

compensate the proximity effect and reduce structure-borne noise.

// MTP 840 DM

QUICKSTART GUIDE

// Getting started

1 Connect your microphone to your mixing console, audio interface or microphone preampliﬁ er with a 3-pin XLR cable.

2 Supply the MTP 840 DM with 48V phantom power (only for Active Mode, do not supply 48V in passive mode).

3 Set the input gain on your mixing console, preamp, etc. accordingly.

4 To ensure best sound quality, do not cover any part of the grille.

5 Rock!

// Please Note

// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.

// Do not apply extensive force on the switches or cable of the microphone.

// When disconnecting the microphone cable, grasp the connector and do not pull the cable.

// Do not attempt to modify or ﬁ x the microphone, as it would void your product warranty.

// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.

// The integrated acoustic pop and windshield can be washed with soap water, if necessary.

1 2 3

LEWITT

Burggasse 79

1070 Vienna

Austria

www.lewitt-audio.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

READ THE

FULL MANUAL!

LEARN EVERYTHING ABOUT YOUR MTP 840 DM

www.lewitt-audio.com/resources/manuals/MTP-840-DM.pdf

DYNAMIC MICROPHONE

CONDENSER SOUND

FEATURE-RICH DYNAMIC HANDHELD MICROPHONE

FOR EXCEPTIONALLY CLEAN SOUND

Produkt Specifikationer

Mærke:	Lewitt
Kategori:	Mikrofon
Model:	MTP 840 DM
Type:	Scene/optræden mikrofon
Bredde:	183 mm
Produktfarve:	Sort
Forbindelsesteknologi:	Ledningsført
Strømkilde:	DC
Driftsspænding:	48 V
Mikrofonindgangsimpedans:	600 ohm (Ω)
Strømforbrug:	5.5 mA
Mikrofon vægt:	336 g
Følsomhed (1 kHz):	3.5
Antal produkter inkluderet:	1 stk
Signal/støjforhold:	75 dB
Dynamisk interval:	135 dB
Lavskåret filter:	250 Hz