Lexar LD4AS008G-R2666GSST Manual

Lexar Ikke kategoriseret LD4AS008G-R2666GSST

Læs gratis den danske manual til Lexar LD4AS008G-R2666GSST (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Lexar LD4AS008G-R2666GSST, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Precautions:

Please ground yourself before handling

your Lexar memory, as Static electricity

can cause damage to the module and

other components in your system.

• To protect your new memory, avoid

touching the connectors. Handle your

Lexar memory using its edge or frame.

• Do not disassemble, crush, short circuit,

or do any kind of modification to your

memory, as it may cause unexpected

hazards.

• Keep your memory away from any kind

of moisture. Moisture can cause electric

shocks with any electronic device.

Installation Guidelines:

Before installing your Lexar memory,

please take all necessary precautions to

comply with your computer manufacturer’s

handling instructions.

1. Power off your computer and disconnect

the main power cord from the wall

outlet. If your computer uses battery

power, remove the battery.

2. Refer to your computer manufacturer’s

instructions for details on how to

remove the outer case, and where the

memory connectors are located.

General Memory Module Installation

Steps:

Follow below steps to complete the

memory product installation:

• Laptop SO-DIMM Installation

• Desktop DIMM Installation

Technical Support:

Visit us at http://www.lexar.com/support/

for further assistance.

Lexar's Limited-lifetime Warranty:

This product is covered for Limited-lifetime

Warranty from the date of purchase,

subject to the applicable warranty terms

and conditions, as defined at

http://www.lexar.com/support/warranties/

Disposal Instructions:

Used electronic equipment should not

be mixed with general household waste.

Improper disposal may be harmful to the

environment and human health. Please

refer to your local waste authority for

information on return and collection

systems in your area.

Do not touch gold pins Do not stack

Do not bend Do not drop

安全及操作说明：

请避免在容易产生静电的环境下放置、安装及使

用，因为静电可能损坏驱动器及系统中的其他组

件。

• 为保护您的内存产品，请避免触摸其接口。

请通过边缘或外框拿放。

• 请勿拆解、碰撞或短接内存产品，或进行对其

任何形式的改装，因为这可能会导致意外的危

害。

• 请将内存产品远离任何种类的湿气。湿气可能

会导致与任何电子设备相关的触电。

安装指南：

安装 Lexar 内存之前，请遵循电脑制造商的操

作说明并采取必要的预防措施。

1. 若为台式电脑，请断开交流电源，请取下

电脑机箱盖。若为笔记本电脑，请断开交流

电源线，请取下电池。

2. 请参阅电脑制造商的使用说明书了解有关如

何拆卸外壳的详细信息，以及内存连接器所

在的位置。

一般安装内存步骤：

请按照以下圖示完成安装。

技术支持：

如需技术支持，请访问 Lexar 网站

http://www.lexar.com/cn/support/

Lexar 有限终身质保：

此产品自购买日期起，享受终身质保，具体参见

http://www.lexar.com/cn/support/warranties/

定义的适用质保条款和条件。

处置说明：

请勿与未分类垃圾一同处置此产品。处置不当

可能会危害环境和人类健康。请咨询当地的废

品处理权威机构，了解您所在地区的回收系统

的信息。

• 笔记本电脑SO-DIMM安装：

• 台式电脑DIMM安装：

避免直接接触接口避免无防护堆叠

避免不当外力施压避免无防护撞击

709000000

Quick Installation Guide

快速安装指南

Produkt Specifikationer

Mærke:	Lexar
Kategori:	Ikke kategoriseret
Model:	LD4AS008G-R2666GSST
Bredde:	69.6 mm
Højde:	30 mm
Opbevaringstemperatur (T-T):	-55 - 100 °C
Driftstemperatur (T-T):	0 - 85 °C
Intern hukommelse:	8 GB
Harmoniseret systemkode (HS):	84733020
Intern hukommelsestype:	DDR4
Hukommelsesur hastighed:	2666 MHz
Hukommelse form faktor:	260-pin SO-DIMM
Komponent til:	Laptop
Hukommelsesspænding:	1.2 V
Hukommelseslayout (moduler x størrelse):	1 x 8 GB
Maksimal blænderåbning:	19