LG CineBeam AI ThinQ HU715QW Manual

LG Beamer CineBeam AI ThinQ HU715QW

Læs gratis den danske manual til LG CineBeam AI ThinQ HU715QW (4 sider) i kategorien Beamer. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13 anmeldelser. Har du et spørgsmål om LG CineBeam AI ThinQ HU715QW, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken when handling
For safety, wear a pair of work gloves when assembling or performing
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the
in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons
shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT O
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
PK-1750918
ASSEMBLY INSTRUCTIONS & PARTS MANUAL
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE
Wardrobe Storage Cabinet
Unassembled Model 1471 or CVD1471
Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686
LOAD CAPACITIES PER SHELF LEVEL
36w x 18d 200 lbs.
UNIT SIZE WEIGHT CAPACITY
EVENLY DISTRIBUTED
ASSEMBLY OF 1471 or CVD1471 CABINET
Tools Needed: A free 11/ ” nut driver is included with each Tennsco cabinet. 32
Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.
2. Place the cabinet back (Ref. No. 1) on a
protected surface to prevent
scratching the paint.
The ange on the
bottom of the back
should be facing upward.
1. The reference numbers used throughout this sheet refer
to the illustration on the back cover. This is to help you
to identify the various parts as they are mentioned.
3. Attach the left side (Ref. No. 2) to the back by placing
ange (A) around the back and bolting together with
seven bolts and nuts (Ref. Nos. 19 & 20). Be sure that the
lances on all shelf adjustment strips (B) are pointing in the
same direction.
5. Insert the shelf (Ref. No. 4) into
the second lance of the side
and back panels.
6. Attach the top (Ref. No. 5) to the unit by sliding the outer ange
over the back of the unit and the side ange of the side panel on
the unit. The threaded studs should go through
the holes in the top lange of the side and
fasten with three nuts. Attach the back
to the top using four bolts
and nuts.
4. Attach the right side (Ref. No. 3) to the back in the same
manner as you did in step 3, again, making sure that
the ange is around the back and that the lances on the
shelf adjustment strips are pointed in the same direction
as those on the back and left side. 8. Place the rear ange of the bottom (Ref. No. 7) into the
bottom lances of the back. The ange with two holes should
face the front, hanging over the sill. Insert the bolts through
the bottom and still with the head
facing the front of the unit.
Secure with two nuts.
Tighten all bolts.
All lances point UP on
both backs and side.
Flange goes
under back.
Flange faces upward.
Flanges
face upward
Slide ends in to the slots
on the bottom of the sides.
Nuts placed loosely
on studs of the sill.
Insert bottom into
bottom lances.
B
A
NOTE: When bolting the unit together, leave
the bolts slightly loose until Step 8, unless
otherwise specified.
NOTE: All illustrations show a solid door. Assembly
for C-Thru doors (CVD1471) is identical.
Two holes must
be in front
Inset A
Use 2nd
lance
7. Next, attach the sill (Ref. No. 6) to the sides, as shown above.
Place nuts loosely on each of the studs and slide the ends of the
sill into the slots on both sides of the unit. Then, securely tighten
the nuts.

Produkt Specifikationer

Mærke: LG
Kategori: Beamer
Model: CineBeam AI ThinQ HU715QW

Har du brug for hjælp?

Hvis du har brug for hjælp til LG CineBeam AI ThinQ HU715QW stil et spørgsmål nedenfor, og andre brugere vil svare dig


Beamer LG Manualer

LG

LG CineBeam Q Stand CQS710PB Manual

4 Januar 2025
LG

LG CineBeam PF510Q Manual

22 December 2024
LG

LG PG65U Manual

22 December 2024
LG

LG ProBeam BF50RG Manual

3 Oktober 2024
LG

LG ProBeam BU60RG Manual

31 August 2024
LG

LG RD-JT41 Manual

20 August 2024
LG

LG PF50KS Manual

19 August 2024
LG

LG CineBeam AI ThinQ HU715QW Manual

9 August 2024
LG

LG HF65LSR Manual

5 August 2024
LG

LG PB61U Manual

5 August 2024

Beamer Manualer

Nyeste Beamer Manualer

Philips

Philips NeoPix 130 Smart Manual

5 Marts 2025
Philips

Philips NeoPix 200 NPX200 Manual

5 Marts 2025
Acer

Acer DX427 Manual

30 Januar 2025
Acer

Acer HL-4K50 Manual

30 Januar 2025
Acer

Acer LR560ATV Manual

30 Januar 2025
Acer

Acer Vero PL3515ATV Manual

30 Januar 2025
Acer

Acer PD2528ic Manual

30 Januar 2025
Acer

Acer Vero PD2328 Manual

30 Januar 2025
Optoma

Optoma UHZ35 Manual

29 Januar 2025
Acer

Acer P1165P Manual

13 Januar 2025