LifeSpan V-Cycle Manual

LifeSpan Cykeltræner V-Cycle

Læs gratis den danske manual til LifeSpan V-Cycle (4 sider) i kategorien Cykeltræner. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 26 anmeldelser. Har du et spørgsmål om LifeSpan V-Cycle, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

V-Cycle Smart Exercise

Bike with NeoWatt

USER MANUAL

NOTE:

Product may vary slightly from the item pictured due

to model upgrades. This manual may be subject to

updates or changes. Up to date manuals are available

through our website at www.lifespanfitness.com.au

Read all instructions carefully before using

this product. Retain this owner’s manual for

future reference.

IMPORTANT

All nuts and bolts are to be checked and tightened on

a regular basis. This includes pedals and other moving

parts. Failure to do so may cause damage to your

threads and void your warranty.

WARNING: Read all instructions before using this machine.

It is important your machine receives regular maintenance to

prolong its useful life. Failing to regularly maintain your machine

may void your warranty.

Please keep this manual with you at all times.

• The bike is for home use only.

• Please correctly connect the power adapter before use.

• To avoid injury, warm up before using the bike.

• Incorrect or excessive training can result in serious injury.

• To avoid accidents, keep the bike out of the reach of children and

pets.

• To avoid getting hurt, keep your hands away from any moving

parts of the bike.

• Use only original parts from the manufacturer. Changes or

modifications to this unit voids the warranty.

• In case of malfunction, stop using the bike immediately.

• Make sure to secure your feet with the pedal straps while using

the bike.

• The bike should be placed on a solid, level and horizontal

surface.

• Allow a clearance of 60cm on each side of the bike.

• Perform regular maintenance for optimal performance and

longevity. To ensure safety, the bike must be checked for wear

and damage on a regular basis.

• Children under the age of 14, persons with reduced physical,

sensory or mental capabilities, as well as persons with a lack of

knowledge must be given supervision or instruction before using

the bike. DO NOT allow children to perform maintenance without

supervision or to play with the bike.

• This adapter has passed CQC certification and can be used with

this bike only. Do not use it with any other products. In case of

any damage, please consult the manufacturer or an authorized

agency for replacement.

I. IMPORTANT SAFETY INSTRUCTIONS II. DAILY STORAGE AND MAINTENANCE

• This bike is for indoor home use only. Do not store the bike

outdoors, near water, or at high humidity levels.

• Please store in a place with shade and shelter to avoid any

damage to the surface.

• Inspect regularly all screws or parts that need fastening.

• Inspect bike seat regularly. Tighten the nuts whenever they

get loose. Inspect the cranks and pedals regularly. Tighten

them if necessary.

• Clean the bike regularly.

Product name:

Model:

Color:

Display:

Wireless

connection:

Equitment type:

Resistance type:

Drive:

Adaptor Input:

Adaptor Output:

Rated voltage:

Max weight:

Height range:

Equipment class:

Dimension:

Net weight:

SPECIFICATION

AI-POWERED EXERCISE

BIKE

MG-C05

Gray

Nixie tube

Bluetooth

Crank training

Speed independent

Belt drive

AC 100-240V, 50-60Hz

DC 24V, 2A

DC 24V

120kg

150-190cm

1020 x 510 x 1250 mm

35kg

III. EXPLODED DIAGRAM

10 12

Part No. Description

1Console

2Pad holder

3Handlebar

4USB port

5Console post

6Handlebar holder

7Pedal

8Crank

9Front stabilizer

Part No. Description

10 Transport wheels

11 Leveling feet

12 Rear stabilizer

13 Power port

14 Power Switch

15 Seatpost holder

16 Seatpost

17 Seat adjuster

18 Saddle

TOOLS

5mm socket

head wrench x 1

Power Adapter x 1

Bike Stabiliser

x 2

Pedals x 2

User Manual x 1

5mm socket

head wrench x 1

15mm Allen

wrench x 1

M6 screws x 4

M10 screws x 4

IV. ASSEMBLY INSTRUCTIONS INSTALL THE PEDALS STEP 7. Handlebar Height Adjustment STEP 10. Set the Seat Height

STEP 1

Place the front and rear

stabilizer as indicated.

Manually tighten the

FOUR M10 screws.

Tighten with a 6mm Allen

wrench.

STEP 2

Connect the cord inside of

the handlebars to the cord

inside of the bike unit. Pay

attention to the direction

of the handlebars when

connecting.

STEP 3. Mount

Handlebars

First, manually spin the

FOUR M6 screws with

your hands as tight as

possible. Then, tighten

and lock in the FOUR M6

screws with the 5mm

Allen Wrench.

WARNING: Make sure to

place the screw shim

properly, with the

cambered surface clung

to the post.

STEP 4. Install

Pedal Straps

Feed the left (L) and right

(R) Pedal Straps into the

matching pedals; notched

side facing inwards.

STEP 5. Install

Left Pedal

STEP 8. Seat

Adjustment

Install the Left Pedal

(marked with an L) onto the

left crank. First, manually

tighten the screw

with your hands (turning

counter—clockwise).

Then, use the 15 mm

Open- End Wrench to fully

tighten (turning counter-

clockwise).

STEP 6. Install

Right Pedal

Install the Right PedaI

(marked with an R) onto

the right crank. First,

manually tighten the

screw with your hands

(turning clockwise). Then,

use the 15 mm Open-end

Wrench to fully tighten

(turning clockwise).

1. Turn the handlebar holder

counterclockwise to loosen

the console post.

2. Adjust the handlebar to a

proper height.

3 rn the handlebar holder . Tu

clockwise to tighten.

4. Pull the handlebar holder

outwards.

5. Turn the handlebar holder

to a vertically downward

direction.

Sit on the saddle and

place you heel on the

pedal. Make sure the

crank arm which is

currently supporting

your foot is point down

and in line with the

seatpost. You are at

the correct seat height

if your leg is fully

extended. That means

you leg is straight, but

without overextending

your knee.

1. Turn the Seatpost holder

counterclockwise to loosen

the console post

2. Adjust the seatpost to a

proper height.

3. Turn the Seatpost holder

clockwise to tighten.

4. Pull the Seatpost holder

outwards.

5. Turn the Seatpost holder to a vertically downward direction.

Caution: It is important to keep the Seatpost holder vertically

downwards as projecting handles with interfere with your

movements.

STEP 9. Seat

Adjustment

Maximum height.

For you safety, make sure to

keep STOP mark inside the

frame while adjusting the

seat height.

STEP 11. Seat

Depth Adjustment

Turn the Below

Seat Knob counter

clockwise to loosen.

Move the seat forward

or back. Turn the

knob clockwise to

tighten.

STEP 12.

Bike Stabillization

Rotate each leveling

foot until the bike

rests firmly on the

floor.

Produkt Specifikationer

Mærke:	LifeSpan
Kategori:	Cykeltræner
Model:	V-Cycle

Har du brug for hjælp?

Hvis du har brug for hjælp til LifeSpan V-Cycle stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Cykeltræner LifeSpan Manualer

LifeSpan SM-720I Manual

7 Juli 2025

LifeSpan SM-420 Manual

7 Juli 2025

LifeSpan V-Cycle Manual

7 Juni 2024

LifeSpan SM-800 Manual

7 Juni 2024

LifeSpan Ampera Manual

7 Juni 2024

LifeSpan SP-310 M2 Manual

7 Juni 2024

LifeSpan EXER-58 Manual

7 Juni 2024

LifeSpan EXER-90H Manual

7 Juni 2024

LifeSpan Cyclestation 3 Manual

7 Juni 2024

LifeSpan SP-870 M3 Manual

7 Juni 2024

Cykeltræner Manualer

Nyeste Cykeltræner Manualer

BH Fitness LK700IC Manual

20 September 2025

BH Fitness Fitness i.Air Mag HIIT Manual

19 September 2025

Active Intent Fitness YK-B581 Manual

17 September 2025

HMS Premium SWL9140 Manual

11 September 2025

HMS Premium M0907 Manual

11 September 2025

HMS Premium M0410 Manual

11 September 2025

HMS Premium M2005 Manual

11 September 2025

HMS Premium M8750 Manual

11 September 2025

HMS Premium MP8880 Manual

10 September 2025

Taurus Racer Pro Touch Manual

10 September 2025