Lincoln Electric NA-4 Manual

Lincoln Electric Svejseapparat NA-4

Læs gratis den danske manual til Lincoln Electric NA-4 (213 sider) i kategorien Svejseapparat. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Lincoln Electric NA-4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/213
Operator’s Manual
NA-3 & NA-4
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM278-E | Issue D ate Jan-16
© Lincoln Global, Inc. All Rights Reserved.
MODELS:
NA-3N, NA-3NF, NA-3S, NA3SF,
NA-4
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
THANK YOU FOR SELECTING
A QUALITY PRODUCT BY
LINCOLN ELEC TRIC.
Please examine Carton and equiPment For
damage immediately
When this equipment is shipped, title passes to the purchaser upon
receipt by the carrier. Consequently, Claims for material damaged in
shipment must be made by the purchaser against the transportation
company at the time the shipment is received.
saFety dePends on you
Lincoln arc welding and cutting equipment is designed and built with
safety in mind. However, your overall safety can be increased by
proper installation ... and thoughtful operation on your part.
DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT
WITHOUT READING THIS MANUAL AND THE SAFETY PRECAUTIONS
CONTAINED THROUGHOUT. And, most importantly, think before you
act and be careful.
This statement appears where the information must be followed
exactly to avoid serious personal injury or loss of life.
This statement appears where the information must be followed to
avoid minor personal injury or damage to this equipment.
KeeP your head out oF the Fumes.
DON’T get too close to the arc. Use
corrective lenses if necessary to
s
tay a reasonable distance away
from the arc.
READ and obey the Material Safety
Data Sheet (MSDS) and the warning
label that appears on all containers
of welding materials.
USE ENOUGH VENTILATION or
exhaust at the arc, or both, to keep
the fumes and gases from your breathing zone and the general area.
IN A LARGE ROOM OR OUTDOORS, natural ventilation may be
adequate if you keep your head out of the fumes (See below).
USE NATURAL DRAFTS or fans to keep the fumes away from your
face.
If you de velop unusual symptoms, see your supervisor. Perhaps the
welding atmosphere and ventilation system should be checked.
wear CorreCt eye, ear & body ProteCtion
PROTECT your eyes and face with welding helmet
properly fitted and with proper grade of filter plate
(See ANSI Z49.1).
PROTECT your body from welding spatter and arc
flash with protective clothing including woolen
clothing, flame-proof apron and gloves, leather
leggings, and high boots.
PROTECT others from splatter, flash, and glare with
protective screens or barriers.
IN SOME AREAS, protection from noise may be
appropriate.
BE SURE protective equipment is in good condition.
Also, wear safety glasses in work area AT ALL
TIMES.
SPECIAL SITUATIONS
DO NOT WELD OR CUT containers or materials which previously had
been in contact with hazardous substances unless they are properly
cleaned. This is extremely dangerous.
DO NOT WELD OR CUT painted or plated parts unless special
precautions with ventilation have been taken. They can release highly
toxic fumes or gases.
Additional precautionary measures
PROTECT compressed gas cylinders from excessive heat, mechanical
shocks, and arcs; fasten cylinders so they cannot fall.
BE SURE cylinders are never grounded or part of an electrical circuit.
REMOVE all potential fire hazards from welding area.
ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR
IMMEDIATE USE AND KNOW HOW TO USE IT.
WARNING
CAUTION

Produkt Specifikationer

Mærke: Lincoln Electric
Kategori: Svejseapparat
Model: NA-4

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric NA-4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Svejseapparat Lincoln Electric Manualer

Lincoln Electric

Lincoln Electric Square Wave TIG 200 Manual

24 September 2025
Lincoln Electric

Lincoln Electric Flextec 500X CE Manual

24 September 2025
Lincoln Electric

Lincoln Electric Flextec 350X PowerConnect Manual

24 September 2025
Lincoln Electric

Lincoln Electric NA-4 Manual

23 September 2025
Lincoln Electric

Lincoln Electric Magnum 100SG Manual

23 September 2025
Lincoln Electric

Lincoln Electric Ranger 305 G EFI Manual

23 September 2025
Lincoln Electric

Lincoln Electric Flextec 650X CE Manual

23 September 2025
Lincoln Electric

Lincoln Electric Tandem Cruiser Manual

8 September 2025
Lincoln Electric

Lincoln Electric Power Wave Advanced Module Manual

8 September 2025
Lincoln Electric

Lincoln Electric Ranger Air 260MPX Manual

8 September 2025

Svejseapparat Manualer

Nyeste Svejseapparat Manualer

Draper

Draper 53084 Manual

23 September 2025
Draper

Draper Storm Force 02516 Manual

23 September 2025
Draper

Draper 69939 Manual

23 September 2025
Draper

Draper 70011 Manual

23 September 2025
GYS

GYS P1 Auto Manual

11 September 2025
Guede

Guede 100 GC Manual

7 September 2025
Guede

Guede GIS 100 Manual

7 September 2025
Stanley

Stanley Star 7000 Manual

6 September 2025
Scheppach

Scheppach WSE3500 Manual

1 September 2025
GYS

GYS PROTIG 250 DC TRI Manual

28 August 2025