Linksys LGS116 Manual

Linksys Skifte LGS116

Læs gratis den danske manual til Linksys LGS116 (5 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Linksys LGS116, eller vil du spørge andre brugere om produktet?

Side 1/5
TABLE
OF CONTENTS
1. What is the Linksys LGS116P Switch?
2. What is PoE?
3. What kind of devices can be connected to the switch?
4. What should I do when my computer cannot connect to the Internet while
connected to the switch?
5. What is the advantage of having a switch when it comes to data transfer?
6. What is the maximum PoE power budget for each PoE switch?
7. What are the protocols supported by the LGS116P?
8. Can I wall-mount my switch?
9. What should I do if my switch experiences excessive data collisions?
10. Can I use a switch to share Internet connection to all computers in the
network?
11. Which ports on my PoE switch can I plug in a PoE device?
12. How is port PoE prioritization done?
13. What is the warranty period for the Linksys LGS116P?
14. What are the supported PoE standards?
15. My PoE device is not powering ON, what should I do?
1. What is the Linksys LGS116P Switch?
The Linksys LGS116P is a 16-Port Gigabit PoE Switch. This unmanaged switch offers
a quick and easy solution to extend your office network with a plug-and-play
installation. It is also useful in transferring data across a local network at up to Gigabit
speeds.
2. What is PoE?
Power over Ethernet (PoE) is a technology that enables an Ethernet network cable to
deliver both data and power.
3. What kind of devices can be connected to the switch?
You can connect the following devices to your LGS116P switch:
LGS116P Frequently Asked Questions
Computers
Routers
Switches
Network Printers
Other network devices
4. What should I do when my computer cannot connect to the Internet while
connected to the switch?
Follow the steps provided below to resolve this issue:
Verify if LEDs are properly lit on the switch.
System LED - Blue
Link/Act/GB – Green-Amber
PoE Max - Amber
PoE - Green
Power down everything and power ON the switch first. Next, power ON the
computer.
NOTE: DHCP capabilities Only routers or modems with can allow sharing of Internet
connection between computers.
5. What is the advantage of having a switch when it comes to data transfer?
The switch acts as a repeater which regenerates data signals as they pass through it.
This feature acts as a safeguard to deter data loss and ensure that transmissions arrive
securely at their destinations. Moreover, a switch is capable of intelligent filtering of
data based on source and destination as compared to the repeater which can only
regenerate the signal without checking its recipients.
6. What is the maximum PoE power budget for each PoE switch?
The Linksys LGS116P has dedicated PoE power budget for the entire switch. 80 Watts
7. What are the protocols supported by the LGS116P?
The Linksys LGS116P switch is compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab,
and 802.3az standards.
8. Can I wall-mount my switch?
Yes, the Linksys LGS116P can be wall-mounted.
9. What should I do if my switch experiences excessive data collisions?


Produkt Specifikationer

Mærke: Linksys
Kategori: Skifte
Model: LGS116
Bredde: 280 mm
Dybde: 120 mm
Højde: 25 mm
Vægt: 774 g
Produktfarve: Sort
Opbevaringstemperatur (T-T): -20 - 70 °C
Relativ luftfugtighed ved drift (H-H): 10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H): 10 - 90 %
Strømforbrug (typisk): 9.32 W
Driftstemperatur (T-T): 0 - 50 °C
Husmateriale: Metal
Certificering: FCC Class A, CE
Netværksstandarder: IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Servicekvalitet support (QoS): Ja
LED-indikatorer: Activity, Link
Indgangsspænding: 12 V
Indgangsstrøm: 1 A
Strøm over Ethernet (PoE): Ingen
Kobber ethernet kabelteknologi: 1000BASE-T, 100BASE-TX, 10BASE-T
Basis omskiftning RJ-45 Ethernet porte, antal: 16
Basis omskiftning RJ-45 Ethernet porttype: Gigabit Ethernet (10/100/1000)
MAC adresselabel: 8000 entries
Switch kapacitet: - Gbit/sek.
Gigabit Ethernet (kobber) porte, antal: 16

Har du brug for hjælp?

Hvis du har brug for hjælp til Linksys LGS116 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte Linksys Manualer

Linksys

Linksys LGS552 Manual

2 August 2024
Linksys

Linksys LGS108 Manual

24 Februar 2024
Linksys

Linksys LGS116 Manual

28 September 2023
Linksys

Linksys LGS124P Manual

2 Januar 2023
Linksys

Linksys LGS105 Manual

27 December 2022
Linksys

Linksys LGS328C Manual

14 December 2022
Linksys

Linksys LGS528 Manual

24 November 2022
Linksys

Linksys LGS308 Manual

12 November 2022
Linksys

Linksys LGS308P Manual

5 November 2022
Linksys

Linksys SE2500 Manual

5 Oktober 2022

Skifte Manualer

Nyeste Skifte Manualer