Logan 301-1 Manual

Logan Skæremaskine 301-1

Læs gratis den danske manual til Logan 301-1 (6 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Logan 301-1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

LoganGraphic.com

For best results use only

authentic Logan blades

INSTRUCTION MANUAL

MODEL 301-1

COMPACT CLASSIC

MAT CUTTER

INSTRUCTIONS AND OPERATION MANUAL

32in (81cm) mat cutting system with bevel

cutting head and straight cut mat knife.

Uses Logan Replacement

Blade #270

L1991N1 6-12

Purchase Date

ID Number (on bottom of board)

Date (on bottom of board)

CAUTION!!

MAT CUTTING BLADES ARE SHARP

Mat border calculator

Mobile app

Compact Classic Mat Cutter

Instruction Manual

Model 301-1

Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com

Congratulations on your purchase of the Logan Compact Classic Mat Cutter.

This versatile and dependable tool will prove to be a useful device for those seeking professional results from a low priced, easy to use mat cutter.

This instruction manual is written to aquaint you thoroughly with this product. Please take some time to familiarize yourself with it before cutting. You

will find that the time taken will be well worth it and you will be cutting quality mats in no time.

CHECK OF CONTENTS:

301-1 Compact Classic - 32” base board with Mat Guide, Bevel Cutting Head, Mat Knife, Slip Sheet, Instructional DVD and 1 five pack of Logan

#270 blades.

Warranty

Logan Graphic Products, Inc. (“Logan”) warrants the 301-1 COMPACT CLASSIC to be free from defects in parts and workmanship for a period of two

years from the date of original purchase. Logan warrants that it will either repair or replace, in its sole discretion, any necessary replacement parts found

to be defective. Should the product need to be returned to Logan for repair or replacement parts, authorization for any return must come from Logan in

writing. Costs of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for any damages or losses,

incidental or consequential, direct or indirect, arising from the use of this product. This warranty extends only to the original purchaser and is not assignable

or transferable. This warranty is in lieu of all other warranties, expressed or implied. Be advised that any Logan products purchased as “new” from an

unauthorized dealer, such as an online auction site or similar, may be void of their warranty.

Logan Graphic Products, Inc.

1100 Brown Street

Wauconda, IL 60084

800/331-6232 847/526-5515

Mat Guide

Used to set the border

width of a mat and

keep the mat in position

IDENTIFICATION OF MACHINE COMPONENTS:

Cutting Board

Vinyl covered base

board of machine

Guide Rail

Used to guide cutting

heads while in use

Slip Sheet

A Slip Sheet is a piece of

scrap mat board that is

placed beneath the mat

when bevel cutting

Start and Stop

Indicator

Line which shows

where to begin

and end cut

Blade Knob

Holds blade in

place for cutting.

Blade Holder

Blade holding

device which slides,

allowing blade to cut

into mat

Nylon Guides

Guides which allow Bevel

Cutting Head to hook

onto Guide Rail

Cutting Board

Bevel Cutting Head

Handle

Knife handle

which holds blade

in two depth

settings

Mat Knife

Blade Knob

Holds blade in

place inside

blade holder

Blade Cover

Covers blade

on knife

Produkt Specifikationer

Mærke:	Logan
Kategori:	Skæremaskine
Model:	301-1
Produktfarve:	Flerfarvet
Materiale:	Metal
Bærehåndtag:	Ja
Maksimal skærebredde:	813 mm
Skærelængde:	813 mm
Skærekapacitet:	- mm
Kniv inkluderet:	Ja
Fjederbelastet styreskinne:	Ja
Parallel styremåtte:	Ja