Lorex W261AQC-E Manual

Lorex Kamera W261AQC-E

Læs gratis den danske manual til Lorex W261AQC-E (2 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Lorex W261AQC-E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HD Wi-Fi Camera

Quick Start Guide

lorex.com

Camera

ATTENTION:

A REGULATED UL / CSA APPROVED power supply is REQUIRED for use

with this camera (included). Use of a non-regulated, non-conforming power

supply can damage this product and voids the warranty.

Power Accessories Mounting Kit

Bracket

W261AQ_QSG_EN_R2

Problem Solution

Cannot set up

camera

• Ensure your mobile device and the camera are

within range of your Wi-Fi router.

• Ensure the LED indicator on the camera is

ashing green before beginning setup.

No picture / signal • Ensure the LED indicator on the camera is

glowing steady green. See ‘LED Behavior’

section for details if otherwise.

• Ensure the camera is properly connected to

power using the included USB power adapter.

• Try repositioning the camera, router, or both to

improve signal strength.

Picture is not clear • Check the camera lens for dirt, dust,

spiderwebs. Clean the lens with a soft, clean

cloth.

• Remove the vinyl cover on the camera lens.

No audio • Ensure audio function on camera is turned on.

• Ensure audio is turned up on viewing device.

Person detection not

working

• Ensure you have enabled Person Detection in

the Device Settings screen of the Lorex Home

app. See ‘Overview of Lorex Home App’ for

details.

Camera stuck

downwards

• Turn off in Device Settings on Privacy Mode

the Lorex Home app. See ‘Overview of Lorex

Home App’ for details.

×3

W261AQ Series

Package Contents

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the tabDownloads

Visit lorex.com

Search for the model

number of your product

Click on your product

in the search results

Resources

As our products are subject to continuous improvement, Lorex reserves the right to

modify product design, specications and prices, without notice and without incurring

LED Behavior

Troubleshooting

See table below for denitions of camera’s LED behaviors:

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT

MAY CAUSE UNDESIRED OPERATION.

Behavior Meaning

(steady) Operating correctly.

(ashing) Ready for connection.

(ashing rapidly) Mobile device is attempting to connect to the camera.

(steady)

Device malfunction. Try resetting the camera (see

‘Camera Overview’ for details) and repeating the

setup.

(ashing)

Network connection failed. Try resetting the camera

(see ‘Camera Overview’ for details) and repeating the

setup.

(ashing rapidly) microSD error. Try removing and re-inserting the

included microSD card, or try a different card.

(alternating) Firmware upgrade in progress.

Camera Overview

Status LED

Microphone

Reset: Press and hold until

the chime sounds to reset

the camera.

microSD slot: microSD card

pre-inserted (expandable up

to 256GB, microSD class 10

or higher).

Speaker

Ethernet: For service only.

Power: Connect the included

USB power adapter.

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use and handling of the product.

• Use the camera within given temperature, humidity and voltage levels noted in

the camera’s specications.

• Do not disassemble the camera.

• Do not point the camera directly at the sun or a source of intense light.

• Periodic cleaning may be required. Use a damp cloth only. Do not use any

harsh, chemical-based cleaners.

• The camera is rated for indoor use

only. Do not mount the camera

outdoors.

• This camera includes an Auto

Mechanical IR Cut Filter. When the

camera changes between Day/

Night viewing modes, an audible

clicking noise may be heard from

the camera. This clicking is normal,

and indicates that the camera lter

is working.

• Audio recording without consent is

illegal in certain jurisdictions. Lorex

Corporation assumes no liability for

use of its products that does not

conform with local laws.

Safety Precautions

Disclaimers

FCC Notice

3.4” / 86mm

4.2”

107mm

Dimensions

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Kamera
Model:	W261AQC-E

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex W261AQC-E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Lorex Manualer

Lorex U222AA Manual

4 Oktober 2024

Lorex ACH20-1B Manual

28 August 2024

Lorex U855AA-E Manual

28 August 2024

Lorex V261LCD Manual

20 Juli 2024

Lorex W261AQC-E Manual

24 April 2024

Lorex C241XC-E Manual

25 April 2023

Lorex W282CAD Manual

18 Februar 2023

Lorex LTH02 Manual

1 December 2022

Lorex W462AQC-E Manual

7 Oktober 2022

Kamera Manualer

Nyeste Kamera Manualer

17 September 2025

16 September 2025

16 September 2025

16 September 2025

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Vemer EasyEye.NOW Manual

2 April 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025