Lorex V261LCD Manual

Lorex Kamera V261LCD

Læs gratis den danske manual til Lorex V261LCD (2 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Lorex V261LCD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

V261LC_QSG_EN_R1

HD Video Floodlight

To prepare for installation:

Before assembly, there are important preparations to make.

Levelled to the ground

• TURN OFF POWER TO YOUR

FLOODLIGHT CIRCUIT AT THE

FUSEBOX TO ENSURE NO

POWER IS BEING SENT. If you

are unsure of which breaker

controls the circuit, then turn

off the main power switch.

If you do not know where

your breaker is or how to turn

off power, consult a licensed

electrician.

• Verify that the supply voltage

is correct. Connect xture to a

100 VAC~240 VAC 50/60 Hz

power source.

• DO NOT connect oodlight to a

dimmer switch or timer.

• If you are not replacing a light

xture, you will need to run

power cabling to the install

location, and purchase a

UL listed junction box for a

licensed electrician to install.

LED Indicator

Quick Start Guide

V261LC Series

lorex.com

HD Video Floodlight

Package Contents

STEP 1: Preparation

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the tabDownloads

Visit lorex.com

Search for the model

number of your product

Click on your product

in the search results

As our products are subject to continuous improvement, Lorex reserves the right to

modify product design, specications and prices, without notice and without incurring

Mounting Screws &

Anchors (×3)

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use and handling of the product.

• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,

chemical-based cleaners.

• Use the product within given temperature, humidity and voltage levels noted in the

product’s specications.

• Do not disassemble the oodlight.

Safety Precautions

• Always follow code standards when installing wired connections.

• This oodlight camera must be installed on a wall and a UL listed junction box.

• This oodlight includes an Auto Mechanical IR Cut Filter. When the camera

changes between Day/Night viewing modes, an audible clicking noise may be

heard from the oodlight. This clicking is normal, and indicates that the camera

lter is working.

• Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation

assumes no liability for use of its products that does not conform with local laws.

Disclaimers

CAUTION

Risk of re.

Do not install camera near ammable or combustible surfaces.

Risk of electrical shock.

Disconnect the power at the fuse box before installation.

Hooks

Mounting Bracket

Scan for

Lorex Home APP

11.4”

290mm

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT

MAY CAUSE UNDESIRED OPERATION.

FCC Notice

Product Overview

PIR motion sensor

Speaker

Microphone

Camera

IR LED

Top cover

Light sensor

Memory slot*

Reset button**

Floodlights

Adjusting knobs

Wire Caps (×3)

Bracket Screws

A and B (×2)

Phillips Machine Screw

10 Feet

32 Feet

12.8” / 325mm

7.3” / 185mm

Mount the oodlight camera 10 feet (3 meters) high with the

motion detector levelled to the ground for optimal detection of

human-sized objects as far as 32 feet (10 meters).

Recommendation:

Front Panel

Back Panel

Behavior Meaning

(steady) Operating correctly.

(ashing) Ready for connection.

(ashing rapidly) Mobile device is attempting to connect to the camera.

(steady) Device malfunction. Try resetting the camera and repeating the setup.

(ashing) Network connection failed. Try resetting the camera and repeating the setup.

(ashing rapidly) Memory slot error. Try removing and re-inserting the included memory slot card,

or try a different card.

(alternating) Firmware upgrade in progress. * To access the memory slot and reset button, twist left to open the top cover.

** To reset the camera, hold down the reset button until the chime sounds and the LED Indicator turns red.

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Kamera
Model:	V261LCD

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex V261LCD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Lorex Manualer

Lorex U222AA Manual

4 Oktober 2024

Lorex ACH20-1B Manual

28 August 2024

Lorex U855AA-E Manual

28 August 2024

Lorex V261LCD Manual

20 Juli 2024

Lorex W261AQC-E Manual

24 April 2024

Lorex C241XC-E Manual

25 April 2023

Lorex W282CAD Manual

18 Februar 2023

Lorex LTH02 Manual

1 December 2022

Lorex W462AQC-E Manual

7 Oktober 2022

Kamera Manualer

Nyeste Kamera Manualer

17 September 2025

16 September 2025

16 September 2025

16 September 2025

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Vemer EasyEye.NOW Manual

2 April 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025