Lowrance SonarHub Manual

Lowrance Hi-Fi system SonarHub

Læs gratis den danske manual til Lowrance SonarHub (4 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 63 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 32 anmeldelser. Har du et spørgsmål om Lowrance SonarHub, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
| 1
Guide | SonarHub
SonarHub guide
SonarHub
You can use the SonarHub to view data from CHIRP, single
frequency and StuctureScan HD transducers.
¼Note: When a CHIRP transducer is in use, you will not be able to
view returns from single frequency sonar or StructureScan HD. You
can view CHIRP and StructureScan HD at the same time by using
two SonarHubs or by connecting your StructureScan HD transducer
directly to your HDS Gen2 Touch display unit or to the LSS-1 or LSS-2
attached to your HDS Gen2 display unit.
CHIRP
A CHIRP (Compressed High Intensity Radar Pulse) transducer sends
out an elongated pulse that broadcasts all frequencies within the
bandwidth of the selected transducer type (Low CHIRP, Medium
CHIRP, High CHIRP). This results in greater depth penetration, better
target separation and enhanced image quality.
¼Note: Your CHIRP transducer will only support one of the
frequencies listed below (Low, Medium or High).
CHIRP frequencies
Low CHIRP Provides the best depth penetration with lower
resolution images
Medium CHIRP Better depth penetration than High CHIRP, but
with minimal loss of target definition
High CHIRP Offers high resolution images in shallow water
2 | Guide | SonarHub
Single frequency transducers
Provides a traditional sonar view of the area under and around your
boat, allowing you to detect fish and examine bottom structure.
Single sonar frequencies
50kHz Lower resolution; best performance in deep water
83kHz Wider cone angle provides greater water coverage
200kHz High resolution; highest sensitivity and better target
separation in shallow water
StructureScan HD transducers
StructureScan HD uses high frequencies to provide a high-
resolution, picture-like image of the bottom.
StructureScan Frequencies
455kHz Excellent resolution and greater range than 800kHz
800kHz Better definition than 455kHz at shallower depths
Selecting a frequency
You can view CHIRP, single frequency sonar or StructureScan sonar
data by selecting the desired frequency from the transducer type
dropdown menu.
Refer to your unit’s operation manual for instructions on selecting a
transducer type.

Produkt Specifikationer

Mærke: Lowrance
Kategori: Hi-Fi system
Model: SonarHub

Har du brug for hjælp?

Hvis du har brug for hjælp til Lowrance SonarHub stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hi-Fi system Lowrance Manualer

Lowrance

Lowrance SonarHub Manual

25 Februar 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

DPA

DPA d:vice MMA-A Manual

1 August 2025
Muse

Muse M-610 SH Manual

31 Juli 2025
Pro-Ject

Pro-Ject Head Box E Manual

30 Juli 2025
Pro-Ject

Pro-Ject Uni Box S3 Manual

30 Juli 2025
Hamilton Buhl

Hamilton Buhl PA-25 Manual

30 Juli 2025
SSL

SSL SQ4 Manual

29 Juli 2025
SSL

SSL ML46DB Manual

29 Juli 2025
SSL

SSL ML39USA Manual

29 Juli 2025
SSL

SSL Evolution EV2.200 Manual

29 Juli 2025
SSL

SSL Evolution EV4.400 Manual

29 Juli 2025