LyxPro SDPC-2 Manual

LyxPro Mikrofon SDPC-2

Læs gratis den danske manual til LyxPro SDPC-2 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om LyxPro SDPC-2, eller vil du spørge andre brugere om produktet?

Side 1/2
PENCIL CONDENSER MIC PAIR
WITH INTERCHANGEABLE OMNI/
CARDIOID/SUPER CARDIOID CAPSULES
User Guide
Thank you for purchasing the LyxPro Large Diaphragm Cardioid Condenser Studio
Microphone. This User Guide is intended to provide you with guidelines to ensure that
operation of this product is safe and does not pose risk to the user. Any use that does not
conform to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
Whats in the Box?
Pencil condenser mics (2)
Omni polar pattern capsules (2)
Cardioid polar pattern capsules (2)
Super cardioid polar pattern capsules (2)
Windscreens (2)
2 tilting microphone clips (2)
Aluminum carrying case
IMPORTANT SAFEGUARDS
Please read all safety precautions and operating instructions before attempting to operate the unit. To reduce the risk of fire, electrical
shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance.
SAFETY PRECAUTIONS
Condenser microphones are extremely moisture-sensitive. Never use your microphone in close proximity to water or in extremely
Do not expose the microphone to extreme temperatures.
Take care not to drop your microphone as this can lead to severe damage.
After each use, wipe the microphone down with a soft cloth and place it back into its protective case.
Do not attempt to alter or disassemble the microphone.
POWER SUPPLY
Phantom Power
This microphone requires phantom power to operate. Phantom power is DC current generated from pro audio equipment such as
mixers and pre-amplifiers, and requires the use of a balanced microphone cable: XLR-to-XLR or XLR-to-TRS. Always mute the sound
on your system before you switch on the phantom power supply.
Connecting to a Mixer or Computer
Computer:
To deliver audio directly to a computer, use a USB audio interface with an XLR microphone input that provides the required
phantom power.
Mixer:
When connecting to a mixer, use only balanced, microphone-level inputs with phantom power. Most mixers have a switch for
phantom power, so make sure phantom power is on for that channel.
USAGE
Turn on your amplifier or mixing board and set the volume control to the minimum position.
Connect the phantom power to the microphone.
Adjust your volume.
Do not cover the head of the microphone, position it too close to the speaker, or point it directly at the speaker.


Produkt Specifikationer

Mærke: LyxPro
Kategori: Mikrofon
Model: SDPC-2

Har du brug for hjælp?

Hvis du har brug for hjælp til LyxPro SDPC-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon LyxPro Manualer

LyxPro

LyxPro SDPC-2 Manual

22 Juli 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer

TOA

TOA S4.10-RXA Manual

6 December 2025
AKG

AKG CM311 XLR Manual

4 December 2025
FoneStar

FoneStar MCH-205 Manual

4 December 2025
AKG

AKG CS5 DU Manual

2 December 2025
Icon

Icon M1 Manual

2 December 2025
Icon

Icon HyperDrive Manual

1 December 2025
Neewer

Neewer KM19 Manual

30 November 2025