Makita 181434-7 Manual

Makita Ikke kategoriseret 181434-7

Læs gratis den danske manual til Makita 181434-7 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Makita 181434-7, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Safety Data Sheet

Issued: July 1, 2011

SHELL TELLUS S2 M

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY

Product name: SHELL TELLUS S2 M

Product type: Hydraulic oil

Supplier: Showa Shell Sekiyu K.K.

Address: Daiba Frontier Building.3-2,Daiba 2 Chome,

Minato-ku,Tokyo 135,JAPAN

Contact numbers:

Telephone:

Fax:

03-5531-5766

03-5531-5768

Emergency telephone number:

Showa Shell Sekiyu K.K.

03-5531-5768

2. COMPOSITION/INFORMATION ON INGREDIENTS

Preparation description: Blend of highly-refined mineral oils and additives.

Composition: Blend of highly-refined mineral oils and additives.

Dangerous

components/constituents:

On the basis of available information, the components of this

preparation are not expected to impart hazardous properties to

this product.

3. HAZARDS IDENTIFICATION

Human health hazards: No specific hazards under normal use conditions. Contains

mineral oil for which an exposure limit for oil mist applies.

Prolonged or repeated exposure may give rise to dermatitis.

Used oil may contain harmful impurities.

Safety hazards: Not classified as flammable, but will burn.

Environmental hazards: Not readily biodegradable. Expected to have a high potential to

bioaccumulate.

Other information: Not classified as dangerous for supply or conveyance.

4. FIRST AID MEASURES

Symptoms and effects: Not expected to give rise to an acute hazard under normal

conditions of use.

First Aid - Inhalation: In the unlikely event of dizziness or nausea, remove casualty to

fresh air. If symptoms persist, obtain medical attention.

463030 SHELL TELLUS S2 M

First Aid - Skin: Remove contaminated clothing and wash affected skin with soap

and water. If persistent irritation occurs, obtain medical attention.

If high pressure injection injuries occur, obtain medical attention

immediately.

First Aid - Eye: Flush eye with copious quantities of water. If persistent irritation

occurs, obtain medical attention.

First Aid - Ingestion: Wash out mouth with water and obtain medical attention. DO

NOT INDUCE VOMITING.

Advice to physicians: Treat symptomatically. Aspiration into the lungs may result in

chemical pneumonitis. Dermatitis may result from prolonged or

repeated exposure.

5. FIRE FIGHTING MEASURES

Specific hazards: Combustion is likely to give rise to a complex mixture of airborne

solid and liquid particulates and gases, including carbon

monoxide, oxides of sulphur, and unidentified organic and

inorganic compounds.

Extinguishing media: Foam and dry chemical powder. Carbon dioxide, sand or earth

may be used for small fires only.

Unsuitable extinguishing

media:

Water in a jet. Use of Halon extinguishers should be avoided for

environmental reasons.

Protective equipment: Proper protective equipment including breathing apparatus must

be worn when approaching a fire in a confined space.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions: Avoid contact with: skin and eyes.

Personal protection: Wear impermeable gloves and boots.

Environmental

precautions:

Prevent from spreading or entering into drains, ditches or rivers

by using sand, earth, or other appropriate barriers. Inform local

authorities if this cannot be prevented.

Clean-up methods - small

spillage:

Absorb liquid with sand or earth. Sweep up and remove to a

suitable, clearly marked container for disposal in accordance

with local regulations.

Clean-up methods - large

spillage:

Prevent from spreading by making a barrier with sand, earth or

other containment material. Reclaim liquid directly or in an

absorbent. Dispose of as for small spills.

7. HANDLING AND STORAGE

Handling: When handling product in drums, safety footwear should be worn

and proper handling equipment should be used. Prevent

spillages.

Storage: Keep in a cool, dry, well-ventilated place. Use properly labelled

and closable containers. Avoid direct sunlight, heat sources, and

strong oxidizing agents.

Storage temperature: 0 C minimum to 50 C maximum. ° °

Recommended materials: For containers or container linings, use: mild steel or high density

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	181434-7

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita 181434-7 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Makita Manualer

20 Juni 2025

19 Juni 2025

19 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SKS Velo 47 Trekking Manual

1 Juli 2025

Alphacool Eisblock Aurora Radeon RX 7800 XT Reference Manual

1 Juli 2025

Mercyu MRU-161 Manual

1 Juli 2025

Ikea UTRUSTA 802.745.24 Manual

1 Juli 2025

Point POKM241 Manual

1 Juli 2025

Casio JW-200SV Manual

1 Juli 2025

Foster FMSLIM900NG Manual

1 Juli 2025

JWIN JT-P10 Manual

1 Juli 2025

Intermatic AG3000 Manual

1 Juli 2025

Haeger Elegant HB-400.021A Manual

1 Juli 2025