Makita 4112HS Manual

Makita Rundsave 4112HS

Læs gratis den danske manual til Makita 4112HS (12 sider) i kategorien Rundsave. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Makita 4112HS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Cutter

4112HS

4112S

4114S

007130

ENGLISH (Original instructions)

SPECIFICATIONS

Model 4112S 4112HS 4114S

Wheel diameter 305 mm 355 mm

Max. wheel thickness 3.5 mm 3.5 mm 3.5 mm

Max cutting capacity 100 mm 125 mm

Rated speed (n) / No load speed (n

0) 3,800 (min-1) 5,000 (min-1) 3,800 (min-1)

Overall length 648 mm 675 mm

Net weight 11.4 kg 12.8 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-8

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE026-1

Intended use

The tool is intended for cutting tracks in concrete walls

or cutting in ferrous materials or concrete drainage

channels with a diamond wheel but without using water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Model 4112S, 4112HS

Sound pressure level (L

pA) : 102 dB (A)

Sound power level (L

WA) : 113 dB (A)

Uncertainty (K) : 3 dB (A)

Model 4114S

Sound pressure level (L

pA) : 103 dB (A)

Sound power level (L

WA) : 114 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model 4112HS

Work mode : concrete cutting

Vibration emission (ah) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model 4112S, 4114S

Work mode : concrete cutting

Vibration emission (ah) : 4.0 m/s2

Uncertainty (K) : 1.5 m/s2

Produkt Specifikationer

Mærke:	Makita
Kategori:	Rundsave
Model:	4112HS
Bredde:	240 mm
Dybde:	648 mm
Højde:	273 mm
Vægt:	11400 g
Produktfarve:	Black, Blue, Silver
Strømkilde:	Vekselstrøm
Tomgang (maks.):	5500 rpm
Bæretaske:	Ja
Lydeffektniveau:	113 dB
Lydtryksniveau:	102 dB
Usikkerhed i lydniveauet:	3 dB
Usikkerhed - k:	1.5 m/s²
Diamantskive:	Ja
Bladskiftende nøgle:	Ja
Diameter for diamantskive:	305 mm
Størrelse på diamantskivebor:	25.4 mm