Makita 7104L Manual

Makita Ikke kategoriseret 7104L

Læs gratis den danske manual til Makita 7104L (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Makita 7104L, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Chain Mortiser

7104L

006289

ENGLISH (Original instructions)

SPECIFICATIONS

Model 7104L

Max. hole length (Longitudinal)

130 mm

Capacities Max. hole depth 155 mm

Width of applicable workpiece 80 mm - 308 mm

Chain speed 300 m / min

Dimensions (L × W × H) 512 mm × 298 mm × 513 mm

Net weight 17.3 kg

Safety class Class I

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END224-1

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE062-1

Intended use

The tool is intended for cutting mortise in wood.

ENF001-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. This

tool should be grounded while in use to protect the

operator from electric shock. Use only three-wire

extension cords which have three-prong grounding-type

plugs and three-pole receptacles which accept the tool's

plug.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN61029:

Sound pressure level (L

pA) : 90 dB(A)

Sound power level (L

WA) : 103 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN61029:

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	7104L

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita 7104L stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Makita Manualer

20 Juni 2025

19 Juni 2025

19 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SKS Velo 47 Trekking Manual

1 Juli 2025

Alphacool Eisblock Aurora Radeon RX 7800 XT Reference Manual

1 Juli 2025

Mercyu MRU-161 Manual

1 Juli 2025

Ikea UTRUSTA 802.745.24 Manual

1 Juli 2025

Point POKM241 Manual

1 Juli 2025

Casio JW-200SV Manual

1 Juli 2025

Foster FMSLIM900NG Manual

1 Juli 2025

JWIN JT-P10 Manual

1 Juli 2025

Intermatic AG3000 Manual

1 Juli 2025

Haeger Elegant HB-400.021A Manual

1 Juli 2025