Makita 9557NBRX1 Manual

Makita Slibemaskine 9557NBRX1

Læs gratis den danske manual til Makita 9557NBRX1 (12 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Makita 9557NBRX1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
INSTRUCTION MANUAL
Angle Grinder
9557NBR
9558NBR
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: 9557NBR 9558NBR
Wheel diameter 115mm (4-1/2″) 125mm (5″)
Max. wheel thickness 6.4mm
Spindle thread M14 or 5/8″ (country specic)
Rated speed (n) 11,000min-1
Overall length 271mm
Net weight 2.0kg 2.1kg
Safety class /II
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA ) : 86 dB(A)
Sound power level (LWA) : 97 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model 9557NBR
Work mode: surface grinding
Vibration emission (ah, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding
Vibration emission (ah, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model 9558NBR
Work mode: surface grinding
Vibration emission (ah, AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding
Vibration emission (ah, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
WARNING: The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
tions, the vibration emission value may be different.

Produkt Specifikationer

Mærke: Makita
Kategori: Slibemaskine
Model: 9557NBRX1

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita 9557NBRX1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Slibemaskine Makita Manualer

Makita

Makita 9562CVR Manual

12 Januar 2025
Makita

Makita DGA513Z Manual

27 September 2024
Makita

Makita GA9020KD Manual

11 September 2024
Makita

Makita GA029GD202 Manual

9 September 2024
Makita

Makita DGA469Z Manual

8 September 2024
Makita

Makita JS3201 Manual

3 September 2024
Makita

Makita JN3201 Manual

3 September 2024
Makita

Makita GA4541CT01 Manual

31 August 2024
Makita

Makita BO4566 Manual

30 August 2024
Makita

Makita BBO180 Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Bosch

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025
Parkside

Parkside PEXS 270 A1 Manual

13 Januar 2025
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual

11 Januar 2025
Bosch

Bosch GWS 18V-8 Professional Manual

5 Januar 2025
DeWalt

DeWalt DWE4115 Manual

30 December 2025
Black Decker

Black Decker 4292 Manual

30 December 2025
Powerplus

Powerplus POWX06250 Manual

30 December 2025
Hazet

Hazet 9032M-36 Manual

30 December 2025
Alpha Tools

Alpha Tools WS 230-3 Manual

28 December 2024
Einhell

Einhell WS 230-4 Manual

28 December 2024