Makita GA4541CT01 Manual

Makita Slibemaskine GA4541CT01

Læs gratis den danske manual til Makita GA4541CT01 (16 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Makita GA4541CT01, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA4040C
GA4540C
GA5040C
GA6040C
GA4041C
GA4541C
GA5041C
012721
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA4040C GA4041C GA4540C GA4541C GA5040C GA5041C
GA6040C
Wheel diameter 100 mm (4") 115 mm (4-1/2") 125 mm (5")
150 mm (6")
Max. wheel thickness 6.4 mm
Spindle thread M10 M14 or 5/8" (country specific)
Rated speed (n) / No load speed (n
0) 11,000 min-1 11,000 min-1 11,000 min-1
9,000 min
-1
Overall length 303 mm 325 mm 303 mm 325 mm 303 mm 325 mm 303 mm
Net weight 2.3 kg 2.6 kg 2.5 kg 2.7 kg 2.5 kg 2.7 kg 2.6 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-8
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.

Produkt Specifikationer

Mærke: Makita
Kategori: Slibemaskine
Model: GA4541CT01

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA4541CT01 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Slibemaskine Makita Manualer

Makita

Makita 9562CVR Manual

12 Januar 2025
Makita

Makita DGA513Z Manual

27 September 2024
Makita

Makita GA9020KD Manual

11 September 2024
Makita

Makita GA029GD202 Manual

9 September 2024
Makita

Makita DGA469Z Manual

8 September 2024
Makita

Makita JS3201 Manual

3 September 2024
Makita

Makita JN3201 Manual

3 September 2024
Makita

Makita GA4541CT01 Manual

31 August 2024
Makita

Makita BO4566 Manual

30 August 2024
Makita

Makita BBO180 Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Bosch

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025
Parkside

Parkside PEXS 270 A1 Manual

13 Januar 2025
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual

11 Januar 2025
Bosch

Bosch GWS 18V-8 Professional Manual

5 Januar 2025
DeWalt

DeWalt DWE4115 Manual

30 December 2025
Black Decker

Black Decker 4292 Manual

30 December 2025
Powerplus

Powerplus POWX06250 Manual

30 December 2025
Hazet

Hazet 9032M-36 Manual

30 December 2025
Alpha Tools

Alpha Tools WS 230-3 Manual

28 December 2024
Einhell

Einhell WS 230-4 Manual

28 December 2024