Makita 9911 Manual

Makita Båndslibere 9911

Læs gratis den danske manual til Makita 9911 (8 sider) i kategorien Båndslibere. Denne vejledning er vurderet som hjælpsom af 57 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 29 anmeldelser. Har du et spørgsmål om Makita 9911, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

Belt Sander

9910

9911

003361

IMPORTANT: Read Before Using.

ENGLISH (Original instructions)

SPECIFICATIONS

Model 9910 9911

Belt size 76 mm x 457 mm

Belt speed 270 m/min 75 - 270 m/min

Overall length 262 mm

Net weight 2.7 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 83 dB (A)

Sound power level (L

WA) : 94 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG212-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : sanding metal plate

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Belt Sander

Model No./ Type: 9910,9911

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

Produkt Specifikationer

Mærke:	Makita
Kategori:	Båndslibere
Model:	9911
Bredde:	130 mm
Dybde:	262 mm
Højde:	130 mm
Vægt:	2700 g
Strøm:	650 W
Indgangseffekt:	650 W
Strømkilde:	Vekselstrøm
Støvbeholder type:	Støvpose
Justerbar hastighed:	Ja
Støvudledningsport:	Ja
Støvpose inkluderet:	Ja
Slibesål type:	Bånd slibemaskine