Makita M9400 Manual

Makita Båndslibere M9400

Læs gratis den danske manual til Makita M9400 (8 sider) i kategorien Båndslibere. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Makita M9400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Belt Sander

M9400

013111

ENGLISH (Original instructions)

SPECIFICATIONS

Model M9400

Belt size 100 mm x 610 mm

Belt speed 380 m/min

Overall length 354 mm

Net weight 6.2 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 87 dB (A)

Sound power level (L

WA) : 98 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : sanding metal plate

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Båndslibere
Model:	M9400
Bredde:	175 mm
Dybde:	354 mm
Højde:	169 mm
Vægt:	6200 g
Produktfarve:	Orange, Silver
Antal hastigheder:	1
Indgangseffekt:	940 W
Strømkilde:	Vekselstrøm
Kabellængde:	2 m
Lydeffektniveau:	98 dB
Lydtryksniveau:	87 dB
Justerbar hastighed:	Ingen
Støvudledningsport:	Ja
Usikkerhed i lydniveauet:	3 dB
Vibrationsniveau (slibning):	2.5 m/s²
Slibesål type:	Bånd slibemaskine
Dobbeltisoleret:	Ja
Slibebælte bredde:	100 mm
Slibebælte længde:	610 mm
Tomgangsremhastighed (maks.):	380 m/min