Makita BO3711 Manual

Makita Planslibere BO3711

Læs gratis den danske manual til Makita BO3711 (8 sider) i kategorien Planslibere. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om Makita BO3711, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

Finishing Sander

BO3710

BO3711

010213

IMPORTANT: Read Before Using.

ENGLISH (Original instructions)

SPECIFICATIONS

Model BO3710 BO3711

Pad size 93 mm x 185 mm

Abrasive paper size 93 mm x 228 mm

Orbits per minute (min-1) 11,000 4,000 - 11,000

Overall length 253 mm

Net weight 1.6 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and electronic

equipment and its implementation in

accordance with national law, electric

equipment that have reached the end of their

life must be collected separately and

returned to an environmentally compatible

recycling facility.

ENE052-1

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted

surfaces.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

ENG104-1

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 72 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG211-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : sanding metal plate

Vibration emission (ah) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Finishing Sander

Model No./ Type: BO3710,BO3711

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Produkt Specifikationer

Mærke:	Makita
Kategori:	Planslibere
Model:	BO3711
Bredde:	253 mm
Dybde:	92 mm
Højde:	154 mm
Vægt:	1600 g
Strøm:	190 W
Indgangseffekt:	190 W
Strømkilde:	Vekselstrøm
Soft greb:	Ja
Kabellængde:	2 m
Støvbeholder type:	Støvpose
Justerbar hastighed:	Ja
Støvudledningsport:	Ja
Støvpose inkluderet:	Ja
Tomgangssvingningshastighed (maks.):	22000 OPM
Slibesål, størrelse:	92 x 185 mm
Maksimal papirstørrelse:	93 x 228 mm
Slibesål type:	Multi slibemaskine
Tomgangssvingningshastighed (min.):	8000 OPM
Sandpapir inkluderet:	Ja
Slibesål, overflade:	3.5 m²